scholarly journals Differential irrigation scheduling by an automated algorithm of water balance tuned by capacitance-type soil moisture sensors

2020 ◽  
Vol 228 ◽  
pp. 105880 ◽  
Author(s):  
Jesús María Domínguez-Niño ◽  
Jordi Oliver-Manera ◽  
Joan Girona ◽  
Jaume Casadesús
2020 ◽  
Vol 36 (3) ◽  
pp. 375-386
Author(s):  
Ruixiu Sui ◽  
Earl D. Vories

HighlightsSensor-based irrigation scheduling methods (SBISM) were compared with computerized water balance scheduling.Number and time of irrigation events scheduled using the SBISM were often different from those predicted by the computerized method.The highly variable soils at the Missouri site complicated interpretation of the sensor values.Both SBISM and computerized water balance scheduling could be used for irrigation scheduling with close attention to soil texture and effective rainfall or irrigation.Abstract. Sensor-based irrigation scheduling methods (SBISM) measure soil moisture to allow scheduling of irrigation events based on the soil-water status. With rapid development of soil moisture sensors, more producers have become interested in SBISM, but interpretation of the sensor data is often difficult. Computer-based methods attempt to estimate soil water content and the Arkansas Irrigation Scheduler (AIS) is one example of a weather-based irrigation scheduling tool that has been used in the Mid-South for many years. To aid producers and consultants interested in learning more about irrigation scheduling, field studies were conducted for two years in Mississippi and a year in Missouri to compare SBISM with the AIS. Soil moisture sensors (Decagon GS-1, Acclima TDR-315, Watermark 200SS) were installed in multiple locations of a soybean field (Mississippi) and cotton field (Missouri). Soil water contents of the fields were measured hourly at multiple depths during the growing seasons. The AIS was installed on a computer to estimate soil water content and the required data were obtained from nearby weather stations at both locations and manually entered in the program. In Mississippi, numbers and times of the irrigation events triggered by the SBISM were compared with those that would have been scheduled by the AIS. Results showed the number and time of irrigation events scheduled using the SBISM were often different from those predicted by the AIS, especially during the 2018 growing season. The highly variable soils at the Missouri site complicated the interpretation of the sensor values. While all of the sites were within the Tiptonville silt loam map unit, some of the measurements appeared to come from sandier soils. The AIS assumed more water entered the soil than the sensors indicated from both irrigations and rainfalls less than 25 mm. While the irrigation amounts were based on the pivot sprinkler chart, previous testing had confirmed the accuracy of the charts. Furthermore, the difference varied among sites, especially for rainfall large enough to cause runoff. The recommendations based on the Watermark sensors agreed fairly well with the AIS in July after the data from the sandiest site was omitted; however, the later irrigations called for by the AIS were not indicated by the sensors. Both the sensor-based irrigation scheduling method and the AIS could be used as tools for irrigation management in the Mid-South region, but with careful attention to soil texture and the effective portion of rainfall or irrigation. Keywords: Irrigation scheduling, Soil moisture sensor, Soil water content, Water management.


Sensors ◽  
2018 ◽  
Vol 18 (11) ◽  
pp. 3786 ◽  
Author(s):  
Sumon Datta ◽  
Saleh Taghvaeian ◽  
Tyson Ochsner ◽  
Daniel Moriasi ◽  
Prasanna Gowda ◽  
...  

Meeting the ever-increasing global food, feed, and fiber demands while conserving the quantity and quality of limited agricultural water resources and maintaining the sustainability of irrigated agriculture requires optimizing irrigation management using advanced technologies such as soil moisture sensors. In this study, the performance of five different soil moisture sensors was evaluated for their accuracy in two irrigated cropping systems, one each in central and southwest Oklahoma, with variable levels of soil salinity and clay content. With factory calibrations, three of the sensors had sufficient accuracies at the site with lower levels of salinity and clay, while none of them performed satisfactorily at the site with higher levels of salinity and clay. The study also investigated the performance of different approaches (laboratory, sensor-based, and the Rosetta model) to determine soil moisture thresholds required for irrigation scheduling, i.e., field capacity (FC) and wilting point (WP). The estimated FC and WP by the Rosetta model were closest to the laboratory-measured data using undisturbed soil cores, regardless of the type and number of input parameters used in the Rosetta model. The sensor-based method of ranking the readings resulted in overestimation of FC and WP. Finally, soil moisture depletion, a critical parameter in effective irrigation scheduling, was calculated by combining sensor readings and FC estimates. Ranking-based FC resulted in overestimation of soil moisture depletion, even for accurate sensors at the site with lower levels of salinity and clay.


2011 ◽  
Vol 137 (2) ◽  
pp. 73-81 ◽  
Author(s):  
L. Zotarelli ◽  
M. D. Dukes ◽  
J. M. S. Scholberg ◽  
K. Femminella ◽  
R. Muñoz-Carpena

2017 ◽  
Vol 10 (1) ◽  
pp. 1 ◽  
Author(s):  
Ruixiu Sui

Irrigation is required to ensure crop production. Practical methods of use sensors to determine soil water status are needed in irrigation scheduling. Soil moisture sensors were evaluated and used for irrigation scheduling in humid region of the Mid-South US. Soil moisture sensors were installed in soil at depths of 15 cm, 30 cm, and 61 cm belowground. Soil volumetric water content was automatically measured by the sensors in a time interval of an hour during the crop growing season. Soil moisture data were wirelessly transferred onto internet through a wireless sensor network (WSN) so that the data could be remotely accessed online. Soil water content measured at the three depths were interpreted using a weighted average method to reflect the status of soil water in plant root zone. A threshold to trigger an irrigation event was determined with sensor-measured soil water content. An antenna mounting device was developed for operation of the WSN. Using the antenna mounting device, the soil moisture measurement was not be interrupted by crop field management practices.


Sign in / Sign up

Export Citation Format

Share Document