Assessment of the low-frequency procedure in the field measurements of impact sound insulation between dwellings

2022 ◽  
Vol 185 ◽  
pp. 108399
Author(s):  
Mikko Kylliäinen ◽  
Lauri Talus ◽  
Jesse Lietzén ◽  
Pekka Latvanne ◽  
Ville Kovalainen
2021 ◽  
Vol 263 (4) ◽  
pp. 2296-2303
Author(s):  
Natacha Aberkane-Gauthier ◽  
Miguel Moleròn ◽  
Damien Lecoq ◽  
Clément Lagarrigue ◽  
Charles Pézerat ◽  
...  

Light and thin structures exhibiting high sound insulation over a wide frequency range are a major industrial concern, especially in the transport and building sectors. Phononic crystals constitute promising solutions to solve this issue due to their particular dispersion properties. In this work, we build a system consisting of a well-known sandwich panel comprising a soft elastic core layer hosting periodically arranged rigid inclusions. Diffuse field measurements show a huge improvement of the Transmission Loss compared to the system without inclusions. In fact, for this kind of panel, the structured core enables Bragg band-gap opening for guided slow propagating waves leading to low frequency and broadband enhancement of the Transmission Loss. Using a 3cm-thick material we are able to improve the response from 300 Hz on (λ/38 in air). We then develop a finite elements model to achieve a precise description and understanding of the problem. We also propose a numerical tool to analyze the system's band-structures from a vibroacoustic point of view. It proves very useful for the further development of practical solutions.


AIP Advances ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 045321
Author(s):  
Chi Xu ◽  
Hui Guo ◽  
Yinghang Chen ◽  
Xiaori Dong ◽  
Hongling Ye ◽  
...  

2021 ◽  
pp. 101348
Author(s):  
Zhenqian Xiao ◽  
Penglin Gao ◽  
Dongwei Wang ◽  
Xiao He ◽  
Linzhi Wu

Author(s):  
Paolo Bergamo ◽  
Conny Hammer ◽  
Donat Fäh

ABSTRACT We address the relation between seismic local amplification and topographical and geological indicators describing the site morphology. We focus on parameters that can be derived from layers of diffuse information (e.g., digital elevation models, geological maps) and do not require in situ surveys; we term these parameters as “indirect” proxies, as opposed to “direct” indicators (e.g., f0, VS30) derived from field measurements. We first compiled an extensive database of indirect parameters covering 142 and 637 instrumented sites in Switzerland and Japan, respectively; we collected topographical indicators at various spatial extents and focused on shared features in the geological descriptions of the two countries. We paired this proxy database with a companion dataset of site amplification factors at 10 frequencies within 0.5–20 Hz, empirically measured at the same Swiss and Japanese stations. We then assessed the robustness of the correlation between individual site-condition indicators and local response by means of statistical analyses; we also compared the proxy-site amplification relations at Swiss versus Japanese sites. Finally, we tested the prediction of site amplification by feeding ensembles of indirect parameters to a neural network (NN) structure. The main results are: (1) indirect indicators show higher correlation with site amplification in the low-frequency range (0.5–3.33 Hz); (2) topographical parameters primarily relate to local response not because of topographical amplification effects but because topographical features correspond to the properties of the subsurface, hence to stratigraphic amplification; (3) large-scale topographical indicators relate to low-frequency response, smaller-scale to higher-frequency response; (4) site amplification versus indirect proxy relations show a more marked regional variability when compared with direct indicators; and (5) the NN-based prediction of site response is the best achieved in the 1.67–5 Hz band, with both geological and topographical proxies provided as input; topographical indicators alone perform better than geological parameters.


Sensors ◽  
2018 ◽  
Vol 18 (11) ◽  
pp. 3674 ◽  
Author(s):  
Wei Lu ◽  
Yu Lan ◽  
Rongzhen Guo ◽  
Qicheng Zhang ◽  
Shichang Li ◽  
...  

A spiral sound wave transducer comprised of longitudinal vibrating elements has been proposed. This transducer was made from eight uniform radial distributed longitudinal vibrating elements, which could effectively generate low frequency underwater acoustic spiral waves. We discuss the production theory of spiral sound waves, which could be synthesized by two orthogonal acoustic dipoles with a phase difference of 90 degrees. The excitation voltage distribution of the transducer for emitting a spiral sound wave and the measurement method for the transducer is given. Three-dimensional finite element modeling (FEM)of the transducer was established for simulating the vibration modes and the acoustic characteristics of the transducers. Further, we fabricated a spiral sound wave transducer based on our design and simulations. It was found that the resonance frequency of the transducer was 10.8 kHz and that the transmitting voltage resonance was 140.5 dB. The underwater sound field measurements demonstrate that our designed transducer based on the longitudinal elements could successfully generate spiral sound waves.


Author(s):  
Alessandro Arduino ◽  
Oriano Bottauscio ◽  
Mario Chiampi ◽  
Ilkka Laakso ◽  
Luca Zilberti

2013 ◽  
Vol 649 ◽  
pp. 277-280
Author(s):  
Petra Berková ◽  
Pavel Berka

Through the use of a spectral analysis of the source of noise – person’s movement over the ceiling construction – it was found out that in this kind of noise distinctive low-frequency tone components occur (31,5 - 40 Hz) which is beyond the evaluation area of the impact sound insulation of the ceiling construction, s. [2], [3].


2009 ◽  
Author(s):  
Laurent Gagliardini ◽  
Charles Fernandez ◽  
Christian Soize

Author(s):  
Arthur Mouragues ◽  
Philippe Bonneton ◽  
Bruno Castelle ◽  
Vincent Marieu

We present field measurements of nearshore currents at a high-energy mesotidal beach with the presence of a 500-m headland and a submerged reef. Small changes in wave forcing and tide elevation were found to largely impact circulation patterns. In particular, under 4-m oblique wave conditions, our measurements indicate the presence of an intense low-frequency fluctuating deflection rip flowing against the headland and extending well beyond the surf zone. An XBeach model is further set up to hindcast such flow patterns.Recorded Presentation from the vICCE (YouTube Link): https://youtu.be/EiqnjBIkWJE


Sign in / Sign up

Export Citation Format

Share Document