Solid oxide fuel cell operation in a solid oxide fuel cell–internal combustion engine hybrid system and the design point performance of the hybrid system

2019 ◽  
Vol 254 ◽  
pp. 113681 ◽  
Author(s):  
Wonjae Choi ◽  
Jaehyun Kim ◽  
Yongtae Kim ◽  
Han Ho Song
2021 ◽  
Vol 281 ◽  
pp. 115854
Author(s):  
Harsh Sapra ◽  
Jelle Stam ◽  
Jeroen Reurings ◽  
Lindert van Biert ◽  
Wim van Sluijs ◽  
...  

2002 ◽  
Vol 124 (4) ◽  
pp. 850-857 ◽  
Author(s):  
L. Magistri ◽  
P. Costamagna ◽  
A. F. Massardo ◽  
C. Rodgers ◽  
C. F. McDonald

In this paper a high efficiency and flexible hybrid system representing a new total energy concept for the distributed power market is presented. The hybrid system is composed of a very small size (5 kW) micro gas turbine (named personal turbine—PT) presented in a companion paper by the authors coupled to a small size solid oxide fuel cell (SOFC) stack. The power of the whole system is 36 kW depending on the design parameters assumed for the stack. The design and off-design performance of the hybrid system have been obtained through the use of an appropriate modular code named “HS-SOFC” developed at the University of Genoa and described in detail in this paper. The results of the simulation are presented and discussed with particular regards to: choice of the hybrid system (HS) design point data, HS design point performance, off-design performance of PT and SOFC stack, and off-design performance of the whole HS. Some preliminary economic results are also included based on different fuel and capital cost scenarios and using the cost of electricity as the parameter for comparison between PT and HS.


2013 ◽  
Vol 31 (1) ◽  
pp. 2-13 ◽  
Author(s):  
Asis Sarkar

Purpose – This paper aims to evaluate nine types of electrical energy generation options with regard to seven criteria. The analytic hierarchy process (AHP) was used to perform the evaluation. The TOPSIS method was used to evaluate the best generation technology. Design/methodology/approach – The options that were evaluated are the hydrogen combustion turbine, the hydrogen internal combustion engine, the hydrogen fuelled phosphoric acid fuel cell, the hydrogen fuelled solid oxide fuel cell, the natural gas fuelled phosphoric acid fuel cell, the natural gas fuelled solid oxide fuel cell, the natural gas turbine, the natural gas combined cycle and the natural gas internal combustion engine. The criteria used for the evaluation are CO2 emissions, NOX emissions, efficiency, capital cost, operation and maintenance costs, service life and produced electricity cost. Findings – The results drawn from the analysis in technology wise are as follows: natural gas fuelled solid oxide fuel cells>natural gas combined cycle>natural gas fuelled phosphoric acid fuel cells>natural gas internal combustion engine>hydrogen fuelled solid oxide fuel cells>hydrogen internal combustion engines>hydrogen combustion turbines>hydrogen fuelled phosphoric acid fuel cells> and natural gas turbine. It shows that the natural gas fuelled solid oxide fuel cells are the best technology available among all the available technology considering the seven criteria such as service life, electricity cost, O&M costs, capital cost, NOX emissions, CO2 emissions and efficiency of the plant. Research limitations/implications – The most dominant electricity generation technology proved to be the natural gas fuelled solid oxide fuel cells which ranked in the first place among nine alternatives. The research is helpful to evaluate the different alternatives. Practical implications – The research is helpful to evaluate the different alternatives and can be extended in all the spares of technologies. Originality/value – The research was the original one. Nine energy generation options were evaluated with regard to seven criteria. The energy generation options were the hydrogen combustion turbine, the hydrogen internal combustion engine, the hydrogen fuelled phosphoric acid fuel cell, the hydrogen fuelled solid oxide fuel cell, the natural gas fuelled phosphoric acid fuel cell, the natural gas fuelled solid oxide fuel cell, the natural gas turbine, the natural gas combined cycle and the natural gas internal combustion engine. The criteria used for the evaluation were efficiency, CO2 emissions, NOX emissions, capital cost, O&M costs, electricity cost and service life.


2014 ◽  
Vol 11 (5) ◽  
Author(s):  
Dengji Zhou ◽  
Jiaojiao Mei ◽  
Jinwei Chen ◽  
Huisheng Zhang ◽  
Shilie Weng

The solid oxide fuel cell–micro gas turbine hybrid system with CO2 capture seems to be a prospective system with high efficiency and low emissions. Three hybrid systems with/without CO2 capture are designed and simulated based on the IPSEPro simulation platform. The performance on the design point shows that case 2 is a better one, whose system efficiency is 59% and CO2 capture rate is 99%; thus, case 2 is suitable to build a quasi-zero carbon emission plant. However, case 3 is more suitable to rebuild an existing plant. Then the off-design point performance and the effect of the capture rate on the system performance of cases 2 and 3 are investigated. The suggested capture rate for cases 2 and 3 is given based on the result, taking both economic factors and carbon emissions into consideration.


Author(s):  
Y. Haseli

Optimum pressure ratios of a regenerative gas turbine (RGT) power plant with and without a solid oxide fuel cell are investigated. It is shown that assuming a constant specific heat ratio throughout the RGT plant, explicit expressions can be derived for the optimum pressure ratios leading to maximum thermal efficiency and maximum net work output. It would be analytically complicated to apply the same method for the hybrid system due to the dependence of electrochemical parameters such as cell voltage on thermodynamic parameters like pressure and temperature. So, the thermodynamic optimization of this system is numerically studied using models of RGT plant and solid oxide fuel cell. Irreversibilities in terms of component efficiencies and total pressure drop within each configuration are taken into account. The main results for the RGT plant include maximization of the work output at the expenses of 2–4% lower thermal efficiency and higher capital costs of turbo-compressor compared to a design based on maximum thermal efficiency. On the other hand, the hybrid system is studied for a turbine inlet temperature (TIT) of 1 250–1 450 K and 10–20% total pressure drop in the system. The maximum thermal efficiency is found to be at a pressure ratio of 3–4, which is consistent with past studies. A higher TIT leads to a higher pressure ratio; however, no significant effect of pressure drop on the optimum pressure ratio is observed. The maximum work output of the hybrid system may take place at a pressure ratio at which the compressor outlet temperature is equal to the turbine downstream temperature. The work output increases with increasing the pressure ratio up to a point after which it starts to vary slightly. The pressure ratio at this point is suggested to be the optimal because the work output is very close to its maximum and the thermal efficiency is as high as a littler less than 60%.


Sign in / Sign up

Export Citation Format

Share Document