Evaluation of Macaranga tanarius as a biomass feedstock for fermentable sugars production

2019 ◽  
Vol 294 ◽  
pp. 122195 ◽  
Author(s):  
Yu-Shen Cheng ◽  
Zer-Yu Wu ◽  
Malinee Sriariyanun
2020 ◽  
Vol 12 (11) ◽  
pp. 4595
Author(s):  
Jennifer Attard ◽  
Helena McMahon ◽  
Pat Doody ◽  
Johan Belfrage ◽  
Catriona Clark ◽  
...  

The bioeconomy can play a critical role in helping countries to find alternative sustainable sources of products and energy. Countries with diverse terrestrial and marine ecosystems will see diverging feedstock opportunities to develop these new value chains. Understanding the sources, composition, and regional availability of these biomass feedstocks is an essential first step in developing new sustainable bio-based value chains. In this paper, an assessment and analysis of regional biomass availability was conducted in the diverse regions of Andalusia and Ireland using a bioresource mapping model. The model provides regional stakeholders with a first glance at the regional opportunities with regards to feedstock availability and an estimate of the transportation costs associated with moving the feedstock to a different modelled location/region for the envisioned biorefinery plant. The analysis found that there were more than 30 million tonnes of (wet weight) biomass arisings from Ireland (84,000 km2) with only around 4.8 million tonnes from the Andalusian region (87,000 km2). The study found that Cork in Ireland stood out as the main contributor of biomass feedstock in the Irish region, with animal manures making the largest contribution. Meanwhile, the areas of Almería, Jaén, and Córdoba were the main contributors of biomass in the Andalusia region, with olive residues identified as the most abundant biomass resource. This analysis also found that, while considerable feedstock divergence existed within the regions, the mapping model could act as an effective tool for collecting and interpreting the regional data on a transnational basis.


Author(s):  
Noriyuki Natsume ◽  
Takayuki Yonezawa ◽  
Yukiko Saito ◽  
Je-Tae Woo ◽  
Toshiaki Teruya

Fermentation ◽  
2021 ◽  
Vol 7 (3) ◽  
pp. 137
Author(s):  
Luis F. Castro ◽  
Abigail D. Affonso ◽  
Renata M. Lehman

Specialty malts are commonly used in brewing to provide flavor, aroma, and color to wort and beer. The use of specialty malts contributes to the variety of beer products; therefore, it is important to understand their effect on the characteristics of wort and beer. This study investigates the impact of various specialty malts on wort and beer properties. A control beer was prepared with 100% base malt, and four beer treatments were prepared with the addition of kilned, roasted, and caramel specialty malts. For each treatment, 20% of the base malt was substituted with the various specialty malts when preparing the wort. The fermentable sugars and free amino nitrogen (FAN) content for each wort were analyzed. Alcohol by volume (ABV), international bitterness units (IBU), diacetyl, and polyphenol content of each prepared beers were subsequently analyzed. Results showed that wort prepared with the addition of roasted and caramel malts contained a lower concentration of fermentable sugars and FAN than wort prepared with the base and kilned malts. Beers prepared with the addition of roasted and caramel malts exhibited the lowest levels of ABV, as well as the lowest levels of diacetyl. These beers also exhibited higher levels of total phenolic compounds compared to the other beer samples. No change was observed in IBU levels as a result of brewing with the different specialty malts. This study illustrates how the use of specialty malts impacts wort and beer properties, providing useful information to aid in the production of quality beer products.


2021 ◽  
Vol 170 ◽  
pp. 113813
Author(s):  
Rodrigo Pagano Martins ◽  
Alison Andrei Schmatz ◽  
Lidyane Aline de Freita ◽  
Marcia Justino Rossini Mutton ◽  
Michel Brienzo

Sign in / Sign up

Export Citation Format

Share Document