Eu2+-activated blue-emitting glass phosphor derived from Eu3+ exchanged USY zeolites by thermal treatment in reducing atmosphere

In recent years, the halloysite (Al2Si2O5(OH)4 · 2H2O) has been highlighted owing to its naturally occurring one-dimensionalmicrostructure that enables versatile applications. Due to the demand for enhancing surface interaction, several types of research such as acid/base treatments have been conducted on the halloysite nanotubes. The objective of this study is to investigate the structural and surface properties of thermally treated halloysites under reducing atmosphere. The heat treatment is carried out in a gas-flow furnace at 400–800 °C under various atmosphere, e.g., ambient air, 4% H2-balanced Ar, and 99.99% H2. The thermal treatment of halloysites under reducing atmosphere show a similar phase transition around 500 °C as the heating under air. However, the halloysite reduced in pure hydrogen shows a significant increase of the zeta-potential, −36.7 mV for a 600 °C-treated sample, compared to the other samples. The mechanisms of the zeta-potential increase for the halloysite was also explored.

Download Full-text

Effect of Atmospheres on Transformation of Heavy Metals during Thermal Treatment of MSWI Fly Ash: By Thermodynamic Equilibrium Calculation

Molecules ◽

10.3390/molecules27010131 ◽

2021 ◽

Vol 27 (1) ◽

pp. 131

Author(s):

Facun Jiao ◽

Xulong Ma ◽

Tao Liu ◽

Chengli Wu ◽

Hanxu Li ◽

...

Keyword(s):

Heavy Metals ◽

Fly Ash ◽

Thermal Treatment ◽

Thermodynamic Equilibrium ◽

Inert Atmosphere ◽

Equilibrium Calculation ◽

Mswi Fly Ash ◽

Reducing Atmosphere ◽

Air Atmosphere ◽

Thermodynamic Equilibrium Calculation

The vaporization behaviors of eight heavy metals (Pb, Zn, Cu, Cd, Cr, Co, Mn, and Ni) in municipal solid wastes incineration (MSWI) fly ash during thermal treatment under air atmosphere (21% O2/79% N2), an inert atmosphere (100% N2), and a reducing atmosphere (50% CO/50% N2) were evaluated based on a thermodynamic equilibrium calculation by FactSage 8.1. The results show that the reducing atmosphere promotes the melting of MSWI fly ash, resulting in a more liquid phase than in air or an inert atmosphere. Except for Cd, the formation of liquids can dissolve heavy metals and reduce their vaporization ratio. In the air and inert atmospheres, Pb, Zn, Cu, Co, Mn, and Ni vaporize mainly in the form of metallic chlorides, while Cd volatilizes in the form of metallic Cd (g) and CdO (g). In the reducing atmosphere, Co, Mn, and Ni still vaporize as chlorides. Zn and Cd mainly vaporize in the form of Zn (g) and Cd (g), respectively. In terms of Pb, in addition to its chlorides, the volatiles of Pb contain some Pb (g) and PbS (g). Cr has a low vaporization ratio, accounting for 2.4% of the air atmosphere. Cr, on the other hand, readily reacts with Ca to form water-soluble CrCaO4, potentially increasing Cr leaching. Except for Cd, the results of this study suggest that the reducing atmosphere is used for the thermal treatment of MSWI fly ash because it promotes the melting of fly ash and thus prevents heavy metal vaporization.

Download Full-text

Variation of emission color of Y3Al5O12:Ce induced by thermal treatment at reducing atmosphere

Journal of Alloys and Compounds ◽

10.1016/j.jallcom.2007.04.116 ◽

2008 ◽

Vol 451 (1-2) ◽

pp. 582-585 ◽

Cited By ~ 28

Author(s):

Eugeniusz Zych ◽

Adam Walasek ◽

Anna Szemik-Hojniak

Keyword(s):

Thermal Treatment ◽

Reducing Atmosphere ◽

Emission Color

Download Full-text

Pollutant Identification by Selected Area Electron Diffraction

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100052675 ◽

1974 ◽

Vol 32 ◽

pp. 532-533

Author(s):

R. E. Ferrell ◽

G. G. Paulson ◽

C. W. Walker

Keyword(s):

Thermal Treatment ◽

Electron Diffraction ◽

Sample Preparation ◽

Crystal Structures ◽

Water Samples ◽

Environmental Samples ◽

Short Review ◽

Selected Area Electron Diffraction ◽

Multiple Component

Selected area electron diffraction (SAD) has been used successfully to determine crystal structures, identify traces of minerals in rocks, and characterize the phases formed during thermal treatment of micron-sized particles. There is an increased interest in the method because it has the potential capability of identifying micron-sized pollutants in air and water samples. This paper is a short review of the theory behind SAD and a discussion of the sample preparation employed for the analysis of multiple component environmental samples.

Download Full-text

Development of Crystallinity in Turbostratic Boron Nitride Derived from Polymeric Precursors

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100089081 ◽

1991 ◽

Vol 49 ◽

pp. 954-955

Author(s):

X. Qiu ◽

A. K. Datye ◽

T. T. Borek ◽

R. T. Paine

Keyword(s):

Thermal Treatment ◽

Boron Nitride ◽

Diffraction Pattern ◽

Polymeric Precursors ◽

Polymer Precursors ◽

Diffuse Ring

Boron nitride derived from polymer precursors is of great interest for applications such as fibers, coatings and novel forms such as aerogels. The BN is prepared by the polymerization of functionalized borazine and thermal treatment in nitrogen at 1200°C. The BN powders obtained by this route are invariably trubostratic wherein the sheets of hexagonal BN are randomly oriented to yield the so-called turbostratic modification. Fib 1a and 1b show images of BN powder with the corresponding diffraction pattern in fig. 1c. The (0002) reflection from BN is seen as a diffuse ring with occational spots that come from crystals of BN such as those shown in fig. 1b. The (0002) lattice fringes of BN seen in these powders are the most characteristic indication of the crystallinity of the BN.

Download Full-text