scholarly journals Minimizing excess sludge production under synergistic effect of diatomite and uncoupling agent 2,4-dinitrophenol: An in-depth study

2022 ◽  
Vol 6 ◽  
pp. 100353
Author(s):  
Jun Li ◽  
Salma Tabassum
Keyword(s):  
Synergistic Effect ◽  
Excess Sludge ◽  
Depth Study ◽  
Sludge Production

Potential of activated sludge disintegration

2006 ◽  
Vol 53 (12) ◽  
pp. 207-216 ◽  
Author(s):  
M. Boehler ◽  
H. Siegrist
Keyword(s):  
Sewage Sludge ◽  
Cost Evaluation ◽  
Anoxic Zone ◽  
Excess Sludge ◽  
Solid Retention Time ◽  
Biological Sludge ◽  
Operating Stability ◽  
Agricultural Use ◽  
Sludge Ash ◽  
Sludge Production

The disposal of sewage sludge and the agricultural use of stabilised sludge are decreasing due to more stringent regulations in Europe. An increasing fraction of sewage sludge must therefore be dewatered, dried, incinerated and the ashes disposed of in landfills. These processes are cost-intensive and also lead to the loss of valuable phosphate resources incorporated in the sludge ash. The implementation of processes that could reduce excess sludge production and recycle phosphate is therefore recommended. Disintegration of biological sludge by mechanical, thermal and physical methods could significantly reduce excess sludge production, improve the settling properties of the sludge and reduce bulking and scumming. The solubilised COD could also improve denitrification if the treated sludge is recycled to the anoxic zone. However, disintegration partly inhibits and kills nitrifiers and could therefore shorten their effective solid retention time, thus reducing the safety of the nitrification. This paper discusses the potential of disintegration on sludge reduction, the operating stability of nitrification, the improvement of denitrification and also presents an energy and cost evaluation.

Decreased sludge production strategy for domestic wastewater treatment

1994 ◽  
Vol 30 (8) ◽  
pp. 97-106 ◽  
Author(s):  
Angel Canales ◽  
Alain Pareilleux ◽  
Jean Luc Rols ◽  
Ge´rard Goma ◽  
Alain Huyard
Keyword(s):  
Wastewater Treatment ◽  
Thermal Treatment ◽  
Cell Lysis ◽  
Production Yield ◽  
Biomass Growth ◽  
Excess Sludge ◽  
Cell Content ◽  
Content Ratio ◽  
Cryptic Growth ◽  
Sludge Production

With new EEC regulations, alternative treatment and disposal techniques of the excess sludge produced by Activated Sludge (AS) wastewater treatment plants have to be performed. In order to reduce the excess sludge produced, experiments have been carried out with a Membrane BioReactor (MBR) to study the maintenance and cryptic growth phenomena of Pseudomonas fluorescens culture taken as a model when grown on a limiting substrate complex medium similar to a synthetic urban wastewater. Experiments with various imposed wasting rates showed that viability and sludge production yield decreased when sludge age increased. Same variations were observed on the cell content ratio protein/polysaccharide by analysis of the cell lysis products released after discontinuous thermal treatment. Biomass growth on these cell lysis products was achieved to characterize cryptic growth and its impact on sludge production yield. Finally, a continuous sludge thermal treatment system was operating with MBR to amplify sludge breakage and consequently biomass growth on the lysis products. With the promising results obtained, this work gives a new outlook on the AS process and leads to the development of processes with control and reduction of sludge production.

Partial ozonation of activated sludge to reduce excess sludge, improve denitrification and control scumming and bulking

2004 ◽  
Vol 49 (10) ◽  
pp. 41-49 ◽  
Author(s):  
M. Böhler ◽  
H. Siegrist
Keyword(s):  
Activated Sludge ◽  
Cost Evaluation ◽  
Anoxic Zone ◽  
Excess Sludge ◽  
Solid Retention Time ◽  
Operation Stability ◽  
Agricultural Use ◽  
Sludge Ash ◽  
And Control ◽  
Sludge Production

Disposal of sewage sludge is forbidden and agricultural use of stabilized sludge will be banned in 2005 in Switzerland. The sludge has to be dewatered, dried, incinerated and the ashes disposed in landfills. These processes are cost intensive and lead also to the loss of valuable phosphate resources incorporated in the sludge ash. The implementation of processes that could reduce excess sludge production and recycle phosphate is therefore recommended. Partial ozonation of the return sludge of an activated sludge system reduces significantly excess sludge production, improves settling properties of the sludge and reduces bulking and scumming. The solubilized COD will also improve denitrification if the treated sludge is recycled to the anoxic zone. But ozonation will partly inhibit and kill nitrifiers and might therefore lead to a decrease of the effective solid retention time of the nitrifier, which reduces the safety of the nitrification. This paper discusses the effect of ozonation on sludge reduction, the operation stability of nitrification, improvement of denitrification and gives also an energy and cost evaluation.

New approaches to minimize excess sludge in activated sludge systems

2001 ◽  
Vol 44 (10) ◽  
pp. 203-208 ◽  
Author(s):  
G.-H. Chen ◽  
S. Saby ◽  
M. Djafer ◽  
H.-K. Mo
Keyword(s):  
Activated Sludge ◽  
Activated Sludge Process ◽  
Conventional System ◽  
Excess Sludge ◽  
Active Sludge ◽  
New Approaches ◽  
Conventional Activated Sludge ◽  
Sludge Settleability ◽  
Activated Sludge Systems ◽  
Sludge Production

This paper presents three new approaches to reduce excess sludge production in activated sludge systems: 1) modification of conventional activated sludge process with insertion of a sludge holding tank in the sludge return line; 2) chlorination of excess sludge so as to minimize excess sludge production; and 3) utilization of a metabolic uncoupler, 3, 3′, 4′, 5-Tetrachlorosalicylanilide (TCS) to maximize futile activity of sludge microorganisms thereby leading to a reduction of sludge growth. Pilot study was carried out to evaluate this modified activated sludge process (OSA). It has been confirmed that the OSA process is effective in reducing excess sludge; particularly when the ORP level in the sludge holding tank was kept at -250 mV, more than 50% of the excess sludge was reduced. This process can maintain the effluent quality and even perform with a better sludge settleability than a conventional system. Experimental work on the second approach showed that chlorination treatment of excess sludge at a chlorine dose of 0.066 g Cl2/g MLSS reduced the excess sludge by 60%, while concentration of THMS was found below 200 ppb in the treated sludge. However, such sludge chlorination treatment sacrificed sludge settleability. Thus, it is not feasible to introduce the chlorination step to a conventional system. The third approach confirmed that addition of TCS could reduce sludge growth effectively if the TCS concentration is greater than 0.4 ppm. A 0.8-ppm concentration of TCS actually reduced excess sludge by 45%. It was also experimentally demonstrated that presence of TCS increases the portion of active sludge microorganisms over the entire microbial population.

Municipal Wastewater Treatment by Periodic Biofilter without Excess Sludge Production

2005 ◽  
Vol 95 (6) ◽  
pp. 447-455 ◽  
Author(s):  
Claudio Di Iaconi ◽  
Roberto Ramadori ◽  
Antonio Lopez ◽  
Roberto Passino
Keyword(s):  
Wastewater Treatment ◽  
Municipal Wastewater ◽  
Municipal Wastewater Treatment ◽  
Excess Sludge ◽  
Sludge Production

scholarly journals Optimization of Ozonation Process for the Reduction of Excess Sludge Production from Activated Sludge Process of Sago Industry Wastewater Using Central Composite Design

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
B. Subha ◽  
M. Muthukumar
Keyword(s):  
Activated Sludge ◽  
Central Composite Design ◽  
Retention Time ◽  
Acidic Ph ◽  
Activated Sludge Process ◽  
Excess Sludge ◽  
Cod Reduction ◽  
Ozonation Time ◽  
Central Composite ◽  
Sludge Production

Sago industries effluent containing large amounts of organic content produced excess sludge which is a serious problem in wastewater treatment. In this study ozonation has been employed for the reduction of excess sludge production in activated sludge process. Central composite design is used to study the effect of ozone treatment for the reduction of excess sludge production in sago effluent and to optimise the variables such as pH, ozonation time, and retention time. ANOVA showed that the coefficient determination value (R2) of VSS and COD reduction were 0.9689 and 0.8838, respectively. VSS reduction (81%) was achieved at acidic pH 6.9, 12 minutes ozonation, and retention time of 10 days. COD reduction (87%) was achieved at acidic pH 6.7, 8 minutes of ozonation time, and retention time of 6 days. Low ozonation time and high retention time influence maximum sludge reduction, whereas low ozonation time with low retention time was effective for COD reduction.

Sign in / Sign up

Export Citation Format

Share Document