Synergistically boosting oxygen evolution performance of iron-tannic electrocatalyst via localized photothermal effect

Author(s):  
Mei Chen ◽  
Zhichao Zhang ◽  
Chunmei Zeng ◽  
Jing Jiang ◽  
Hejun Gao ◽  
...  
2020 ◽  
Author(s):  
Likun Gao ◽  
Xun Cui ◽  
Zewei Wang ◽  
Christopher Sewell ◽  
Zili Li ◽  
...  

Abstract The ability to develop highly active and low-cost electrocatalysts represents an important endeavor toward accelerating sluggish water-oxidation kinetics. Herein, we report, for the first time, the implementation and unravelling of photothermal effect of spinel nanoparticles (NPs) on promoting dynamic active sites generation to markedly enhance their oxygen evolution reaction (OER) activity via an integrated operando Raman and density functional theory (DFT) study. Specifically, NiFe2O4 (NFO) NPs are first synthesized by capitalizing on amphiphilic star-like diblock copolymers as nanoreactors. Upon the NIR light irradiation, the photothermal heating of the NFO-based electrode progressively raises the temperature, accompanied by a marked decrease of overpotential. Accordingly, only an overpotential of 309 mV is required to yield a high current density of 100 mA cm-2, greatly lower than recently-reported earth-abundant electrocatalysts. More importantly, photothermal effect of NFO NPs not only significantly reduces the activation energy necessitated for water splitting, but also facilitates surface reconstruction into high-active oxyhydroxides at lower potential (1.36 V) under OER conditions, as revealed by operando Raman spectra-electrochemistry. Moreover, the DFT calculation corroborates that these reconstructed (Ni,Fe)oxyhydroxides are electrocatalytically active sites as the kinetics barrier is largely reduced over pure NFO without surface reconstruction. Given the diversity of materials (metal oxides, sulfides, phosphides, etc.) possessing the photo-to-thermal conversion, this effect may thus provide a unique and robust platform to boost highly-active surface species in nanomaterials for fundamental understanding of enhanced performance that may underpin future advances in electrocatalysis, photocatalysis, solar energy conversion and renewable energy production.  


Small ◽  
2019 ◽  
Vol 15 (44) ◽  
pp. 1903847 ◽  
Author(s):  
Baojie Jin ◽  
Yinchang Li ◽  
Jingnan Wang ◽  
Fanyu Meng ◽  
Shuaisheng Cao ◽  
...  

2021 ◽  
Vol 118 (7) ◽  
pp. e2023421118
Author(s):  
Likun Gao ◽  
Xun Cui ◽  
Zewei Wang ◽  
Christopher D. Sewell ◽  
Zili Li ◽  
...  

The ability to develop highly active and low-cost electrocatalysts represents an important endeavor toward accelerating sluggish water-oxidation kinetics. Herein, we report the implementation and unraveling of the photothermal effect of spinel nanoparticles (NPs) on promoting dynamic active-sites generation to markedly enhance their oxygen evolution reaction (OER) activity via an integrated operando Raman and density functional theory (DFT) study. Specifically, NiFe2O4 (NFO) NPs are first synthesized by capitalizing on amphiphilic star-like diblock copolymers as nanoreactors. Upon the near-infrared light irradiation, the photothermal heating of the NFO-based electrode progressively raises the temperature, accompanied by a marked decrease of overpotential. Accordingly, only an overpotential of 309 mV is required to yield a high current density of 100 mA cm−2, greatly lower than recently reported earth-abundant electrocatalysts. More importantly, the photothermal effect of NFO NPs facilitates surface reconstruction into high-active oxyhydroxides at lower potential (1.36 V) under OER conditions, as revealed by operando Raman spectroelectrochemistry. The DFT calculation corroborates that these reconstructed (Ni,Fe)oxyhydroxides are electrocatalytically active sites as the kinetics barrier is largely reduced over pure NFO without surface reconstruction. Given the diversity of materials (metal oxides, sulfides, phosphides, etc.) possessing the photo-to-thermal conversion, this effect may thus provide a unique and robust platform to boost highly active surface species in nanomaterials for a fundamental understanding of enhanced performance that may underpin future advances in electrocatalysis, photocatalysis, solar-energy conversion, and renewable-energy production.


Nanoscale ◽  
2020 ◽  
Vol 12 (39) ◽  
pp. 20413-20424
Author(s):  
Riming Hu ◽  
Yongcheng Li ◽  
Fuhe Wang ◽  
Jiaxiang Shang

Bilayer single atom catalysts can serve as promising multifunctional electrocatalysts for the HER, ORR, and OER.


2018 ◽  
Author(s):  
Yingqian Wang ◽  
Xiaoxia Hu ◽  
Lingling Zhang ◽  
Chunli Zhu ◽  
Jie Wang ◽  
...  

Extracellular vesicles (EVs) are involved in the regulation of cell physiological activity and the reconstruction of extracellular environment. Matrix vesicles (MVs) are a type of EVs, and they participate in the regulation of cell mineralization. Herein, bioinspired MVs embedded with black phosphorus are functionalized with cell-specific aptamer (denoted as Apt-bioinspired MVs) for stimulating biomineralization. The aptamer can direct bioinspired MVs to targeted cells, and the increasing concentration of inorganic phosphate originated from the black phosphorus can facilitate cell biomineralization. The photothermal effect of the Apt-bioinspired MVs also positively affects mineralization. In addition, the Apt-bioinspired MVs display outstanding bone regeneration performance. Considering the excellent behavior of the Apt-bioinspired MVs for promoting biomineralization, our strategy provides a way of designing bionic tools for studying the mechanisms of biological processes and advancing the development of medical engineering.<br>


2019 ◽  
Author(s):  
Seoin Back ◽  
Kevin Tran ◽  
Zachary Ulissi

<div> <div> <div> <div><p>Developing active and stable oxygen evolution catalysts is a key to enabling various future energy technologies and the state-of-the-art catalyst is Ir-containing oxide materials. Understanding oxygen chemistry on oxide materials is significantly more complicated than studying transition metal catalysts for two reasons: the most stable surface coverage under reaction conditions is extremely important but difficult to understand without many detailed calculations, and there are many possible active sites and configurations on O* or OH* covered surfaces. We have developed an automated and high-throughput approach to solve this problem and predict OER overpotentials for arbitrary oxide surfaces. We demonstrate this for a number of previously-unstudied IrO2 and IrO3 polymorphs and their facets. We discovered that low index surfaces of IrO2 other than rutile (110) are more active than the most stable rutile (110), and we identified promising active sites of IrO2 and IrO3 that outperform rutile (110) by 0.2 V in theoretical overpotential. Based on findings from DFT calculations, we pro- vide catalyst design strategies to improve catalytic activity of Ir based catalysts and demonstrate a machine learning model capable of predicting surface coverages and site activity. This work highlights the importance of investigating unexplored chemical space to design promising catalysts.<br></p></div></div></div></div><div><div><div> </div> </div> </div>


2020 ◽  
Author(s):  
Ding Yuan ◽  
Yuhai Dou ◽  
Chun-Ting He ◽  
Linping Yu ◽  
Li Xu ◽  
...  

2000 ◽  
Vol 1 (1) ◽  
pp. 235-244
Author(s):  
Ahmed Hamad ◽  
Mohamed Osman ◽  
Refaat Abdel-Basset

1980 ◽  
Vol 45 (8) ◽  
pp. 2272-2282 ◽  
Author(s):  
Jan Balej ◽  
Martin Kadeřávek

Preparation of peroxodisulphates by electrolysis of mixed solutions of sulphuric acid and various sulphates was studied at low degree of conversion; the partial polarization curves of peroxodisulphate formation and of oxygen evolution obtained from the overall anodic polarization curves and current yields of the principal anodic processes were examined. The mechanism of the effect of various cations on the rate of anodic formation of peroxodisulfates is discussed.


Sign in / Sign up

Export Citation Format

Share Document