A mechanism-based multi-scale model for predicting thermo-oxidative degradation in high temperature polymer matrix composites

2011 ◽  
Vol 71 (10) ◽  
pp. 1309-1315 ◽  
Author(s):  
Priyank Upadhyaya ◽  
Sushil Singh ◽  
Samit Roy
2021 ◽  
Author(s):  
Alireza Sayyidmousavi

Polymer matrix composites (PMC’s) are widely used in critical aerospace structures due to their numerous advantageous mechanical properties. Recently, PMC’s have been considered for high temperature applications where viscoelasticity arising from the time dependent nature of the polymer matrix becomes an important consideration. This inherent viscoelasticity can significantly influence deformation, strength and failure response of these materials under different loading modes and environmental factors. With a potentially large number of plies of different fiber directions and perhaps material properties, determining a fatigue failure criterion of any degree of generality through experiments only, may seem to be an unrealistic task. This difficult situation may be mitigated through the development of suitable theoretical micro or macro mechanical models that are founded on considering the fatigue failure of the constituting laminas. The micro‐approach provides a detailed examination of the individual failure modes in each of the constituent materials i.e. fiber, matrix. In this work, a micromechanical approach is used to study the role of viscoelasticity on the fatigue behavior of polymer matrix composites. In particular, the study examines the interaction of fatigue and creep in polymer matrix composites. The matrix phase is modeled as a vicoelastic material using Schapery’s single integral constitutive equation. Taking viscoelsticity into account allows the study of creep strain evolution during the fatigue loading. The fatigue failure criterion is expressed in terms of the fatigue failure functions of the constituent materials. The micromechanical model is also used to calculate these fatigue failure functions from the knowledge of the S‐N diagrams of the composite material in longitudinal, transverse and shear loadings thus eliminating the need for any further experimentation. Unlike the previous works, the present study can distinguish between the strain evolution due to fatigue and creep. The results can clearly show the contribution made by the effect of viscoelasticity to the total strain evolution during the fatigue life of the specimen. Although the effect of viscoelsticity is found to increase with temperature, its contribution to strain development during fatigue is compromised by the shorter life of the specimen when compared to lower temperatures.


2006 ◽  
Vol 324-325 ◽  
pp. 663-666 ◽  
Author(s):  
Maciej S. Kumosa

In this work, potential problems with the application of polymer matrix composites (PMC) in extreme environments [1] is discussed. Then, two specific examples of the applications of PMCs in high voltage [2-7] and high temperature [8-15] situations are evaluated. The first example deals with damage evolution in high voltage composite insulators [2-7] with PMC rods subjected to a combined action of extreme mechanical, electrical and environmental stresses. These insulators are widely used in transmission line and substation applications around the world. Subsequently, advanced high temperature graphite/polyimide composites [8-15] are evaluated for aerospace applications. The composite investigated in this project were used to manufacture and successfully test a Rocket Based Combined Cycle (RBCC) third-generation, reusable liquid propellant rocket engine, which is one possible engine for a future single-stage-to-orbit vehicle [8].


Sign in / Sign up

Export Citation Format

Share Document