Impact of natural and artificial ageing on the properties of multilayer external wall thermal insulation systems

2022 ◽  
Vol 317 ◽  
pp. 125834
Author(s):  
João Luís Parracha ◽  
Giovanni Borsoi ◽  
Inês Flores-Colen ◽  
Rosário Veiga ◽  
Lina Nunes
2011 ◽  
Vol 374-377 ◽  
pp. 1438-1441
Author(s):  
Zhen Sha ◽  
Nian Ping Li ◽  
Bai Jun Wang ◽  
Yong Yang ◽  
Zhen Hui Xiao

The mathematical analysis model of LCC of self-thermal insulation system of external wall that is applicable to Changsha region is established by using degree days and present worth factor. And the LCC of three commonly used self-thermal insulation systems in Changsha is analyzed by using this model. Analysis results have proven that self-thermal insulation system of external wall has very significant comprehensive economic benefits compared with the wall that energy-saving measures are not taken, and it has an important practical significance to promote the development of energy-saving building in Changsha, China.


2021 ◽  
Vol 13 (5) ◽  
pp. 2491
Author(s):  
Alena Tažiková ◽  
Zuzana Struková ◽  
Mária Kozlovská

This study deals with small investors’ demands on thermal insulation systems when choosing the most suitable solution for a family house. By 2050, seventy percent of current buildings, including residential buildings, are still expected to be in operation. To reach carbon neutrality, it is necessary to reduce operational energy consumption and thus reduce the related cost of building operations and the cost of the life cycle of buildings. One solution is to adapt envelopes of buildings by proper insulation solutions. To choose an optimal thermal insulation system that will reduce energy consumption of building, it is necessary to consider the environmental cost of insulation materials in addition to the construction cost of the materials. The environmental cost of a material depends on the carbon footprint from the initial origin of the material. This study presents the results of a multi-criteria decision-making analysis, where five different contractors set the evaluation criteria for selection of the optimal thermal insulation system. In their decision-making, they involved the requirements of small investors. The most common requirements were selected: the construction cost, the construction time (represented by the total man-hours), the thermal conductivity coefficient, the diffusion resistance factor, and the reaction to fire. The confidences of the criteria were then determined with the help of the pairwise comparison method. This was followed by multi-criteria decision-making using the method of index coefficients, also known as the method of basic variant. The multi-criteria decision-making included thermal insulation systems based on polystyrene, mineral wool, thermal insulation plaster, and aerogels’ nanotechnology. As a result, it was concluded that, currently, in Slovakia, small investors emphasize the cost of material and the coefficient of thermal conductivity and they do not care as much about the carbon footprint of the material manufacturing, the importance of which is mentioned in this study.


2018 ◽  
Vol 163 ◽  
pp. 08004 ◽  
Author(s):  
Ewa Sudoł ◽  
Dawid Dębski ◽  
Renata Zamorowska ◽  
Barbara Francke

In the paper the results of an experimental program intended to determine factors influencing the impact resistance of the External Thermal Insulation Composite Systems (ETICS) were presented. For the research the systems based on polystyrene have been chosen. The insulation material was faced with a rendering consisting of base coat reinforced with standard or armored glass fibre mesh and silicone or silicone-silicate binders as finishing coats. The influence of various renderings components was evaluated with respect to resistance to hard body impact and resistance to hail. The test results were discussed in the context of the possible impact level on ETICS in use.


2011 ◽  
Vol 71-78 ◽  
pp. 4115-4119
Author(s):  
Xiao Qiu Ma

To ensure the construction quality of EPS external wall thermal insulation system , need to controll raw materials, construction conditions, construction methods and quality control acceptance criteria and other aspects


Sign in / Sign up

Export Citation Format

Share Document