Developing future hourly weather files for studying the impact of climate change on building energy performance in Hong Kong

2011 ◽  
Vol 43 (10) ◽  
pp. 2860-2868 ◽  
Author(s):  
A.L.S. Chan
Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4805
Author(s):  
Shu Chen ◽  
Zhengen Ren ◽  
Zhi Tang ◽  
Xianrong Zhuo

Globally, buildings account for nearly 40% of the total primary energy consumption and are responsible for 20% of the total greenhouse gas emissions. Energy consumption in buildings is increasing with the increasing world population and improving standards of living. Current global warming conditions will inevitably impact building energy consumption. To address this issue, this report conducted a comprehensive study of the impact of climate change on residential building energy consumption. Using the methodology of morphing, the weather files were constructed based on the typical meteorological year (TMY) data and predicted data generated from eight typical global climate models (GCMs) for three representative concentration pathways (RCP2.6, RCP4.5, and RCP8.5) from 2020 to 2100. It was found that the most severe situation would occur in scenario RCP8.5, where the increase in temperature will reach 4.5 °C in eastern Australia from 2080–2099, which is 1 °C higher than that in other climate zones. With the construction of predicted weather files in 83 climate zones all across Australia, ten climate zones (cities)—ranging from heating-dominated to cooling-dominated regions—were selected as representative climate zones to illustrate the impact of climate change on heating and cooling energy consumption. The quantitative change in the energy requirements for space heating and cooling, along with the star rating, was simulated for two representative detached houses using the AccuRate software. It could be concluded that the RCP scenarios significantly affect the energy loads, which is consistent with changes in the ambient temperature. The heating load decreases for all climate zones, while the cooling load increases. Most regions in Australia will increase their energy consumption due to rising temperatures; however, the energy requirements of Adelaide and Perth would not change significantly, where the space heating and cooling loads are balanced due to decreasing heating and increasing cooling costs in most scenarios. The energy load in bigger houses will change more than that in smaller houses. Furthermore, Brisbane is the most sensitive region in terms of relative space energy changes, and Townsville appears to be the most sensitive area in terms of star rating change in this study. The impact of climate change on space building energy consumption in different climate zones should be considered in future design strategies due to the decades-long lifespans of Australian residential houses.


Author(s):  
Yassine Kharbouch ◽  
Mohamed Ameur

Abstract Climate change has become a real challenge in different fields, including the building sector. Understanding and assessing the impact of climate change on building energy performance is still necessary to elaborate new climate-adaptive design measures for future buildings. The building energy consumption for heating and cooling is mainly related to the building envelope thermal performance. In this study, the winter heat loss and summer heat gain indicators are proposed to assess and analyse the potential impact of climate change on opaque building envelope elements for different climate zones in Morocco over the next 40 years. For that purpose, a one-dimensional heat transfer model is used to simulate the heat transfer through the multi-layer structure of the wall/roof. A medium climate change scenario is considered in this study. The results showed that the current average walls and roof summer heat gain is expected to increase of about 19.2–54.3% by the 2060s depending on the climate zone, versus a less important decrease in winter heat loss varies between –10.6 and –20.6%. This paper provides a reliable evaluation of the climate change impact on building envelope thermal performance, which leads to better adjustments in future building envelope designs.


2021 ◽  
Vol 10 (10) ◽  
pp. 709
Author(s):  
Deng Wang ◽  
Guoqin Zhang ◽  
Tao Lin ◽  
Xinyue Hu ◽  
Zhuoqun Zhao ◽  
...  

Continuous growth of building energy consumption CO2 emission (BECCE) threatens urban sustainable development. Urban form is an important factor affecting BECCE. Compactness is a significant urban morphological characteristic. There is currently a lack of research on the effect of urban three-dimensional (3D) compactness on BECCE. To clarify the research value of 3D compactness, we investigated whether 3D compactness has a stronger impact on BECCE than two-dimensional (2D) compactness. A total of 288 buildings of the People’s Bank of China (PBOC) were divided into 5 zones according to building climate demarcation. As BECCE is affected mainly by four aspects (socioeconomic condition, building features, macroclimate, and urban form), the BECCE driven by urban form (BECCE-f) in each zone was calculated firstly using the partial least square regression model. Normalized compactness index (NCI) and normalized vertical compactness index (NVCI) were calculated with Python to quantify urban 2D and 3D compactness within a 1 km buffer of PBOC buildings. The mean NCI and NVCI values of each zone were adopted as 2D and 3D compactness of this zone. Gray correlation analysis of the five zones showed that the connection between the NVCI and BECCE-f is stronger than that between NCI and BECCE-f. Based on this, we believe that the emphasis of later research should be shifted to urban 3D form, not just 2D elements. 3D form can describe the real urban form in a more accurate and detailed manner. Emphasizing 3D morphological characteristics in studies of the relationship between urban form and building energy performance is more meaningful and valuable than only considering 2D characteristics. The impact mechanism of urban form on BECCE-f should also be analyzed from the perspective of 3D form. This study also provides beneficial solutions to building energy saving and low-carbon building construction.


2017 ◽  
Vol 39 (4) ◽  
pp. 492-500 ◽  
Author(s):  
Roger Hitchin

This Technical Note describes a framework for handling the inherent complexities of carbon emission and primary energy factors for networked electricity supply systems within building energy codes and similar policy instruments. The proposed framework reflects the main characteristics of carbon emissions from such networked supplies, while retaining a level of complexity (and simplification) comparable to that of procedures used in existing building energy codes. The main issues that are addressed are the time-varying nature of factors for networked supply, the impact of variability and curtailment for variable and intermittent renewable sources of electricity and relationship between “marginal” factors and “average” factors. These are important issues as the currently common use of annual system-average factors can result in misleading guidance as to the most effective ways of reducing carbon emissions or primary energy demand. The note first explains the relationship between building energy performance ratings and networked electric supplies. It then discusses the characteristics of electricity demand and the networked supply systems before proposing and discussing the framework. Practical application: A framework that can improve the reliability of building energy performance rating based on carbon emissions or primary energy factors.


Sign in / Sign up

Export Citation Format

Share Document