Three-dimensional OpenFOAM simulation to evaluate the thermal comfort of occupants, indoor air quality and heat losses inside an indoor swimming pool

2018 ◽  
Vol 167 ◽  
pp. 49-68 ◽  
Author(s):  
Abdelhakim Limane ◽  
Hachimi Fellouah ◽  
Nicolas Galanis
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Three Dimensional ◽  
Heat Losses ◽  
Swimming Pool ◽  
Indoor Swimming Pool

scholarly journals Improving Ventilation Efficiency for a Highly Energy Efficient Indoor Swimming Pool Using CFD Simulations

Fluids ◽  
2018 ◽  
Vol 3 (4) ◽  
pp. 92 ◽  
Author(s):  
Gabriel Rojas ◽  
Jessica Grove-Smith
Keyword(s):  
Air Quality ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Measurement Data ◽  
Swimming Pool ◽  
Air Distribution ◽  
Cfd Simulations ◽  
Indoor Swimming Pool ◽  
Ventilation Efficiency ◽  
Computational Resources

The operation of a typical indoor swimming pool is very energy intensive. Previous studies have shown that high quality thermal building envelopes, i.e., with high levels of insulation and airtightness, make it possible to rethink conventional ventilation concepts. Due to the reduced condensation risk in and on envelopes of high thermal quality, ventilation design can be optimized for indoor air quality rather than for averting condensation on the facade. This work investigates different air distribution concepts for an existing swimming pool via computational fluid dynamics (CFD) simulations to evaluate their ventilation efficiency. To reduce modelling and computational resources, the velocity and turbulence fields produced by the swirl-diffusers are determined in a set of separate CFD simulations and incorporated into the swimming pool models. The results show that the ventilation efficiency in the examined swimming pool could potentially be improved with various alternative air distribution concepts, therefore improving the indoor air quality. Although the results seem plausible and compare well with the limited measurement data of air humidity, a more formal experimental validation is still needed before generalizing recommendations.

scholarly journals Air Ventilation Performance of School Classrooms with Respect to the Installation Positions of Return Duct

2021 ◽  
Vol 13 (11) ◽  
pp. 6188
Author(s):  
Sungwan Son ◽  
Choon-Man Jang
Keyword(s):  
Air Quality ◽  
Numerical Analysis ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Three Dimensional ◽  
Cross Infection ◽  
School Students ◽  
Height Range ◽  
Air Ventilation ◽  
Ventilation Performance

For students, who spend most of their time in school classrooms, it is important to maintain indoor air quality (IAQ) to ensure a comfortable and healthy life. Recently, the ventilation performance for indoor air quality in elementary schools has emerged as an important social issue due to the increase in the number of days of continuous high concentrations of particulate matter. Three-dimensional numerical analysis has been introduced to evaluate the indoor airflow according to the installation location of return diffusers. Considering the possibility of the cross-infection of infectious diseases between students due to the direction of airflow in the classroom, the airflow angles of the average respiratory height range of elementary school students, between 1.0 and 1.5 m, are analyzed. Throughout the numerical analysis inside the classroom, it is found that the floor return system reduces the indoor horizontal airflow that causes cross-infection among students by 20% compared to the upper return systems. Air ventilation performance is also analyzed in detail using the results of numerical simulation, including streamlines, temperature and the age of air.

scholarly journals Improving indoor air quality and thermal comfort in office building by using combination filters

2017 ◽  
Vol 243 ◽  
pp. 012052 ◽  
Author(s):  
H Kabrein ◽  
M Z M Yusof ◽  
A Hariri ◽  
A M Leman ◽  
A Afandi
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Office Building

The Potential of Natural Ventilation in Single-Sided Ventilated Apartment to Improve Indoor Thermal Comfort and Air Quality

2011 ◽  
Author(s):  
M. F. Mohamed ◽  
M. Behnia ◽  
S. King ◽  
D. Prasad
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Natural Ventilation ◽  
Architectural Element ◽  
Flat Design ◽  
Effective Ventilation ◽  
Computational Fluid Dynamics Cfd ◽  
Ventilation Performance

Cross ventilation is a more effective ventilation strategy in comparison to single-sided ventilation. In the NSW Residential Flat Design Code1 (RFDC) the majority of apartments are required to adopt cross ventilation. However, in the case of studio and one-bedroom apartments, it is acknowledged that single-sided ventilation may prevail. Deep plan studio and one-bedroom apartments may achieve lower amenity of summer thermal comfort and indoor air quality where mechanical ventilation is not provided by air conditioning. Since compliance with the code may allow up to 40% of apartments in a development in Sydney to be single sided, it is important to understand the natural ventilation performance of such apartments. The objective of this paper is to investigate the natural ventilation potential in single-sided ventilated apartments to improve indoor air quality and thermal comfort. This investigation includes simulating various facade treatments involving multiple opening and balcony configurations. Balcony configurations are included in this study because, in Sydney, a balcony is a compulsory architectural element in any apartment building. The study uses computational fluid dynamics (CFD) software to simulate and predict the ventilation performance of each apartment configuration. This study suggests that properly configured balconies and openings can significantly improve indoor ventilation performance for enhanced indoor air quality and thermal comfort, by optimizing the available prevailing wind. However, it is important to note that inappropriately designed fac¸ade treatments also could diminish natural ventilation performance.

Human Thermal Comfort and Indoor Air Quality

2016 ◽  
pp. 67-98
Author(s):  
T. Agami Reddy ◽  
Jan F. Kreider ◽  
Peter S. Curtiss ◽  
Ari Rabl
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Human Thermal Comfort

scholarly journals Energy Production in Solar Collectors in a University Building Used to Improve the Internal Thermal Conditions in Winter Conditions

2021 ◽  
Vol 246 ◽  
pp. 03005
Author(s):  
Eusébio Conceição ◽  
João Gomes ◽  
Mª Manuela Lúcio ◽  
Hazim Awbi
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Energy Production ◽  
Numerical Study ◽  
Thermal Conditions ◽  
Solar Collectors ◽  
Transient Conditions ◽  
Winter Conditions

In this numerical study the energy production in solar collectors in a University building used to improve the internal thermal conditions is made. Passive and active solutions, using external solar collector and internal thermo-convectors, are used. The numerical simulation, in transient conditions, is done for a winter typical day with clean sky. This numerical study was carried out using a software that simulates the Building Dynamic Response with complex topology in transient conditions. The software evaluates the human thermal comfort and indoor air quality levels that the occupants are subjected, Heated Ventilation and Air Conditioned energy consumption, indoor thermal variables and other parameters. The university building has 107 compartments and is located in a Mediterranean-type environment. External solar water collectors, placed above the building’s roof, and internal thermo-convectors of water/air type, using mixing ventilation, are used as passive and active strategies, respectively. The thermal comfort level, using the Predicted Mean Vote index, and the indoor air quality, using the carbon dioxide concentration, are evaluated. The results show that in winter conditions the solar collectors improve the thermal comfort conditions of the occupants. The indoor air quality, in all ventilated spaces, is also guaranteed.

scholarly journals Operation Testing of an Advanced Personalized Ventilation System

Energies ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1596 ◽  
Author(s):  
Csáky ◽  
Kalmár ◽  
Kalmár
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Distribution System ◽  
Noise Level ◽  
Background Noise ◽  
Ventilation System ◽  
Air Distribution ◽  
Personalized Ventilation

Using personalized ventilation systems in office buildings, important energy saving might be obtained, which may improve the indoor air quality and thermal comfort sensation of occupants at the same time. In this paper, the operation testing results of an advanced personalized ventilation system are presented. Eleven different air terminal devices were analyzed. Based on the obtained air velocities and turbulence intensities, one was chosen to perform thermal comfort experiments with subjects. It was shown that, in the case of elevated indoor temperatures, the thermal comfort sensation can be improved considerably. A series of measurements were carried out in order to determine the background noise level and the noise generated by the personalized ventilation system. It was shown that further developments of the air distribution system are needed.

scholarly journals Evaluation of Effects of the Humidity Level-Based Auto-Controlled Centralized Exhaust Ventilation Systems on Thermal Comfort of Multi-Family Residential Buildings in South Korea

2019 ◽  
Vol 11 (17) ◽  
pp. 4791
Author(s):  
Kwag ◽  
Park ◽  
Kim ◽  
Kim
Keyword(s):  
Air Quality ◽  
South Korea ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Residential Buildings ◽  
Humidity Level ◽  
Exhaust Ventilation ◽  
Air Tightness ◽  
Ventilation Systems

Building air-tightness has been increased to make energy efficient buildings. However, various indoor air quality issues can be caused by high building air-tightness because it allows low air and moisture transmission through building envelop. In order to solve and prevent these issues, mechanical ventilation systems can be used to control the indoor humidity level. The purpose of this paper is to evaluate the performances of the Relative Humidity (RH)-sensor based auto-controlled centralized exhaust ventilation systems to manage indoor air quality and thermal comfort of multi-family residential buildings in South Korea. A series of field tests were performed for different target zones and for various moisture source scenarios. As a result, it was found that the auto-controlled centralized exhaust ventilation systems were able to control indoor air quality and to maintain the zones thermal comfort faster than the baseline cases that did not operate exhaust vents. The results presented in this paper can show the potential and the feasibility of the auto-controlled centralized exhaust ventilation systems for multi-family residential buildings in South Korea. It is expected that the results presented in this paper would be useful for building owners, engineers, and architects when designing building systems.

Sign in / Sign up

Export Citation Format

Share Document