Division methods and selection principles for the ideal optical window of spectral beam splitting photovoltaic/thermal systems

The study deals with the possibility of elimination of stagnation of thermal systems. The state of stagnation of thermal systems leads to overheating and evaporation of the heat transfer medium, which increases pressure and can lead to damage to the solar thermal system. Stagnation can occur due to a fault and stopping of the circulation pump, which causes the circulation of the heat transfer medium to stop. Another possibility is to achieve thermal saturation in the system, which can be affected by low heat consumption from the system. Elimination of stagnation is possible by various construction designs of collectors or by using other technical means. This study describes an experiment verifying the usability of a thermal collector’s tilting system to eliminate thermal stagnation of the system. The system is fully automatic, and when recording the limit values, ensures that the panel is rotated out of the ideal position, thus reducing the amount of received energy. In this way, the temperature of the medium in the system can be reduced by up to 10% in one hour. In the case of thermal saturation of the system, the solution is the automatic circulation of heat-transfer fluid through the system during the night and the release of thermal energy to the outside. These results suggest that the methods used actively eliminate stagnation of thermal systems.

Download Full-text

Localization of Intracellular Antigens in thin Sections with Ferritin Labeled Antibody

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100067868 ◽

1970 ◽

Vol 28 ◽

pp. 174-175

Author(s):

M.S. Shahrabadi ◽

T. Yamamoto

Keyword(s):

Bovine Serum Albumin ◽

Bovine Serum ◽

Antigenic Determinants ◽

Conjugate Prior ◽

Thin Sections ◽

Specific Attachment ◽

Intracellular Antigen ◽

Antigen Antibody ◽

Ideal Method ◽

The Ideal

The technique of labeling of macromolecules with ferritin conjugated antibody has been successfully used for extracellular antigen by means of staining the specimen with conjugate prior to fixation and embedding. However, the ideal method to determine the location of intracellular antigen would be to do the antigen-antibody reaction in thin sections. This technique contains inherent problems such as the destruction of antigenic determinants during fixation or embedding and the non-specific attachment of conjugate to the embedding media. Certain embedding media such as polyampholytes (2) or cross-linked bovine serum albumin (3) have been introduced to overcome some of these problems.

Download Full-text

Criteria and Methods for Reliable Three-Dimensional Image Reconstruction

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100051669 ◽

1974 ◽

Vol 32 ◽

pp. 330-331

Author(s):

R. A. Crowther

Keyword(s):

Image Reconstruction ◽

Finite Number ◽

Density Distribution ◽

Electron Micrographs ◽

Mathematical Problem ◽

Three Dimensional ◽

Ideal Case ◽

Dimensional Image ◽

General Object ◽

The Ideal

The reconstruction of a three-dimensional image of a specimen from a set of electron micrographs reduces, under certain assumptions about the imaging process in the microscope, to the mathematical problem of reconstructing a density distribution from a set of its plane projections.In the absence of noise we can formulate a purely geometrical criterion, which, for a general object, fixes the resolution attainable from a given finite number of views in terms of the size of the object. For simplicity we take the ideal case of projections collected by a series of m equally spaced tilts about a single axis.

Download Full-text

X-Ray Analysis of Frozen Hydrated Sections:The Unconventional Approach

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100056065 ◽

1982 ◽

Vol 40 ◽

pp. 754-757

Author(s):

R. Beeuwkes ◽

A. Saubermann ◽

P. Echlin ◽

S. Churchill

Keyword(s):

Ratio Method ◽

Frozen Sections ◽

Technical Problems ◽

Sample Handling ◽

X Ray ◽

Common Group ◽

Ideal Method ◽

Classic Paper ◽

Physical Principles ◽

The Ideal

Fifteen years ago, Hall described clearly the advantages of the thin section approach to biological x-ray microanalysis, and described clearly the ratio method for quantitive analysis in such preparations. In this now classic paper, he also made it clear that the ideal method of sample preparation would involve only freezing and sectioning at low temperature. Subsequently, Hall and his coworkers, as well as others, have applied themselves to the task of direct x-ray microanalysis of frozen sections. To achieve this goal, different methodological approachs have been developed as different groups sought solutions to a common group of technical problems. This report describes some of these problems and indicates the specific approaches and procedures developed by our group in order to overcome them. We acknowledge that the techniques evolved by our group are quite different from earlier approaches to cryomicrotomy and sample handling, hence the title of our paper. However, such departures from tradition have been based upon our attempt to apply basic physical principles to the processes involved. We feel we have demonstrated that such a break with tradition has valuable consequences.

Download Full-text

High Resolution Study of Polytypism: Application to SiC and Au3 Mn

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100055540 ◽

1982 ◽

Vol 40 ◽

pp. 540-541

Author(s):

G. Van Tendeloo ◽

J. Van Landuyt ◽

S. Amelinckx

Keyword(s):

Electron Microscopy ◽

High Resolution ◽

Stacking Sequence ◽

X Ray ◽

Powerful Technique ◽

Resolution Study ◽

The Ideal

Polytypism has been studied for a number of years and a wide variety of stacking sequences has been detected and analysed. SiC is the prototype material in this respect; see e.g. Electron microscopy under high resolution conditions when combined with x-ray measurements is a very powerful technique to elucidate the correct stacking sequence or to study polytype transformations and deviations from the ideal stacking sequence.

Download Full-text

Possible applications of fraunhofer holography in high resolution electron microscopy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100108258 ◽

1978 ◽

Vol 36 (1) ◽

pp. 222-223 ◽

Cited By ~ 1

Author(s):

N. Bonnet ◽

M. Troyon ◽

P. Gallion

Keyword(s):

Electron Microscopy ◽

High Resolution ◽

Transfer Function ◽

Radiation Damage ◽

High Resolution Electron Microscopy ◽

Far Field ◽

Field Region ◽

Crystalline Materials ◽

Resolution Electron ◽

The Ideal

Two main problems in high resolution electron microscopy are first, the existence of gaps in the transfer function, and then the difficulty to find complex amplitude of the diffracted wawe from registered intensity. The solution of this second problem is in most cases only intended by the realization of several micrographs in different conditions (defocusing distance, illuminating angle, complementary objective apertures…) which can lead to severe problems of contamination or radiation damage for certain specimens.Fraunhofer holography can in principle solve both problems stated above (1,2). The microscope objective is strongly defocused (far-field region) so that the two diffracted beams do not interfere. The ideal transfer function after reconstruction is then unity and the twin image do not overlap on the reconstructed one.We show some applications of the method and results of preliminary tests.Possible application to the study of cavitiesSmall voids (or gas-filled bubbles) created by irradiation in crystalline materials can be observed near the Scherzer focus, but it is then difficult to extract other informations than the approximated size.

Download Full-text

The DQE of an electron image recording system

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100107642 ◽

1978 ◽

Vol 36 (1) ◽

pp. 100-101

Author(s):

K.-H. Herrmann ◽

D. Krahl ◽

H.-P Rust

Keyword(s):

Primary Electron ◽

Ideal Case ◽

Image Recording ◽

Main Requirement ◽

High Detection ◽

Electron Image ◽

Video Amplifier ◽

Detection Quantum Efficiency ◽

Selection Of ◽

The Ideal

The high detection quantum efficiency (DQE) is the main requirement for an imagerecording system used in electron microscopy of radiation-sensitive specimens. An electronic TV system of the type shown in Fig. 1 fulfills these conditions and can be used for either analog or digital image storage and processing [1], Several sources of noise may reduce the DQE, and therefore a careful selection of various elements is imperative.The noise of target and of video amplifier can be neglected when the converter stages produce sufficient target electrons per incident primary electron. The required gain depends on the type of the tube and also on the type of the signal processing chosen. For EBS tubes, for example, it exceeds 10. The ideal case, in which all impinging electrons create uniform charge peaks at the target, is not obtainable for several reasons, and these will be discussed as they relate to a system with a scintillator, fiber-optic and photo-cathode combination as the first stage.

Download Full-text

New type electron gun with electrostatic and electromagnetic lenses

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100107459 ◽

1978 ◽

Vol 36 (1) ◽

pp. 62-63

Author(s):

T. Ichinokawa ◽

H. Maeda

Keyword(s):

Electron Microscopy ◽

Electron Beam ◽

Optimum Condition ◽

Bias Voltage ◽

Electron Gun ◽

Charge Effect ◽

Micro Fabrication ◽

Maximum Brightness ◽

New Type ◽

The Ideal

I. IntroductionThermionic electron gun with the Wehnelt grid is popularly used in the electron microscopy and electron beam micro-fabrication. It is well known that this gun could get the ideal brightness caluculated from the Lengumier and Richardson equations under the optimum condition. However, the design and ajustment to the optimum condition is not so easy. The gun has following properties with respect to the Wehnelt bias; (1) The maximum brightness is got only in the optimum bias. (2) In the larger bias than the optimum, the brightness decreases with increasing the bias voltage on account of the space charge effect. (3) In the smaller bias than the optimum, the brightness decreases with bias voltage on account of spreading of the cross over spot due to the aberrations of the electrostatic immersion lens.In the present experiment, a new type electron gun with the electrostatic and electromagnetic lens is designed, and its properties are examined experimentally.

Download Full-text

Quantitative energy-filtered electron diffraction

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100172693 ◽

1994 ◽

Vol 52 ◽

pp. 992-993

Author(s):

R. Vincent

Keyword(s):

Electron Diffraction ◽

Inelastic Scattering ◽

Dynamic Range ◽

Electron Optics ◽

Surface Layers ◽

High Brightness ◽

Inclined Surfaces ◽

Perfect Symmetry ◽

Amorphous Surface ◽

The Ideal

Microanalysis and diffraction on a sub-nanometre scale have become practical in modern TEMs due to the high brightness of field emission sources combined with the short mean free paths associated with both elastic and inelastic scattering of incident electrons by the specimen. However, development of electron diffraction as a quantitative discipline has been limited by the absence of any generalised theory for dynamical inelastic scattering. These problems have been simplified by recent innovations, principally the introduction of spectrometers such as the Gatan imaging filter (GIF) and the Zeiss omega filter, which remove the inelastic electrons, combined with annual improvements in the speed of computer workstations and the availability of solid-state detectors with high resolution, sensitivity and dynamic range.Comparison of experimental data with dynamical calculations imposes stringent requirements on the specimen and the electron optics, even when the inelastic component has been removed. For example, no experimental CBED pattern ever has perfect symmetry, departures from the ideal being attributable to residual strain, thickness averaging, inclined surfaces, incomplete cells and amorphous surface layers.

Download Full-text