Two-level comprehensive energy-efficiency quantitative diagnosis scheme for ethylene-cracking furnace with multi-working-condition of fault and exception operation

Energy ◽  
2022 ◽  
Vol 239 ◽  
pp. 121835
Author(s):  
Di Meng ◽  
Cheng Shao ◽  
Li Zhu
Keyword(s):  
Energy Efficiency ◽  
Working Condition ◽  
Quantitative Diagnosis ◽  
Ethylene Cracking Furnace

scholarly journals Multivariate State Estimation Technique Combined with Modified Information Entropy Weight Method for Steam Turbine Energy Efficiency Monitoring Study

Energies ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6795
Author(s):  
Hui Gu ◽  
Hongxia Zhu ◽  
Xiaobo Cui
Keyword(s):  
Energy Efficiency ◽  
State Estimation ◽  
Steam Turbine ◽  
Information Entropy ◽  
Working Condition ◽  
Estimation Technique ◽  
Entropy Weight ◽  
Entropy Weight Method ◽  
Weight Method ◽  
Deviation Degree

An energy efficiency monitoring method of the steam turbine system is studied in this paper. Multivariate state estimation technique (MSET) is utilized to compare the actual monitoring parameters and the healthy data of the equipment in normal working condition with a multi parameter estimation model. Due to the limitation of a single heat rate index in evaluating energy efficiency variation, the energy efficiency deviation degree combined with improved information entropy weight is proposed to judge the steam turbine’s operation condition levels. The index value in the modified weight method has been searched for more steady weight values calculated by information entropy values with small variation. Taking a 600 MW unit as an example, the energy efficiency levels of the unit under a 550 MW normal working condition are clustered into four groups, testifying the MSET model correctness and calculating the deviation degree value. Then, the energy efficiency status monitoring model is utilized to record residuals of actual data and estimated data during abnormal energy efficiency period. The residuals over deviation degree are then marked and judged as related with the abnormal data. The results show that the MSET model can timely and accurately judge the change of unit operation state, and the deviation degree calculated by the modified information entropy weight method can provide earlier warnings for the abnormal energy efficiency working conditions.

Drying and heating of scrap metal at steelmaking: industrial safety, economics, ecology

2020 ◽  
Vol 76 (12) ◽  
pp. 1353-1258
Author(s):  
V. A. Spirin ◽  
V. E. Nikol’skii ◽  
D. V. Vokhmintsev ◽  
A. A. Moiseev ◽  
P. G. Smirnov ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
High Efficiency ◽  
Steel Production ◽  
Scrap Metal ◽  
Industrial Safety ◽  
Technical Solution ◽  
Metal Charge ◽  
Basic Task ◽  
Scrap Heating ◽  
Winter Time

At steel production based on scrap metal utilization, the scrap heating before charging into a melting facility is an important way of energy efficiency increase and ecological parameters improving. In winter time scrap metal charging with ice inclusions into a metal melt can result in a considerable damage of equipment and even accidents. Therefore, scrap preliminary drying is necessary to provide industrial safety. It was shown, that in countries with warm and low-snow climate with no risk of scrap metal icing up during its transportation and storing in the open air, the basic task being solved at the scrap drying is an increase of energy efficiency of steelmaking. InRussiathe scrap metal drying first of all provides the safety of the process and next - energy saving. Existing technologies of scrap metal drying and heating considered, as well as advantages and drawbacks of technical solutions used at Russian steel plants. In winter time during scrap metal heating at conveyers (Consteel process) hot gases penetrate not effectively into its mass, the heat is not enough for evaporation of wetness in the metal charge. At scrap heating by the furnace gases, a problem of dioxines emissions elimination arises. Application of shaft heaters results in high efficiency of scrap heating. However, under conditions of Russian winter the upper scrap layers are not always heated higher 0 °С and after getting into a furnace bath the upper scrap layers cause periodical vapor explosions. The shaft heaters create optimal conditions for dioxines formation, which emit into atmosphere. It was shown, that accounting Russian economic and nature conditions, the metal charge drying and heating in modified charging buckets by the heat of burnt natural gas or other additional fuel is optimal. The proposed technical solution enables to burnt off organic impurities ecologically safely, to melt down ice, to evaporate the wetness in the scrap as well as to heat the charge as enough as the charging logistics enables it. The method was implemented at several Russian steel plants. Technical and economical indices of scrap metal drying in buckets under conditions of EAF-based shop, containing two furnaces ДСП-100, presented.

SISTEM AUTOMATIC SWITCH REDUNDANT UPS UNTUK BEBAN ESSENSIAL

2019 ◽  
Vol 5 (1) ◽  
pp. 35-45
Author(s):  
Markus Dwiyanto Tobi ◽  
Alimuddin Mappa
Keyword(s):  
Power Supply ◽  
Working Condition ◽  
Control Circuit ◽  
Energy Sources ◽  
Main Equipment ◽  
Telecommunication Equipment ◽  
Input Condition ◽  
Research Designs ◽  
Switch Circuit

The role of the power supply device is to produce, process and distribute energy sources. Telecommunication equipment can only operate if it has continuous supply. Therefore, to maintain the continuity of the supply, a UPS (Uninterruptable Power Supply) device system is needed so that the supply to the Essential Load device will remain available so that continuity will be maintained. This research designs and proposes how a series of automatic redundant switch systems on UPS to ensure the availability of power supply for the main equipment of telecommunications systems. The Auto switch circuit is designed to have 3 (three) working stages which will trigger the relay driver as control circuit, namely the normal working condition of the contactor input K1 is present, the input condition is zero (lost), and the input condition is present. This system can automatically supply power to telecommunications equipment.

Perspectives and Regulation of the Russian Market for Project-based Transactions under the Kyoto Protocol

2008 ◽  
pp. 108-125
Author(s):  
K. Zavodov
Keyword(s):  
Energy Efficiency ◽  
Market Mechanism ◽  
Point Of View ◽  
Market Regulation ◽  
Foreign Investments ◽  
Russian Market ◽  
Increase Energy Efficiency ◽  
New Form ◽  
Contract Structure ◽  
Carbon Fund

Project-based transactions (PBTs) are a market mechanism of attracting foreign investments in order to abate greenhouse gas emissions and increase energy efficiency of the country’s enterprises. The article provides a classification and analyzes advantages and drawbacks of PBTs from the point of view of a host country. The main trends and factors determining the dynamics of the PBT market are described. Given that Russia currently lags behind the leaders of the PBT market, an incorporation of a state carbon fund is put forward with an aim of channelling PBTs through it. This paper proposes a form of PBT market regulation by incorporating an option mechanism into the contract structure of a transaction. A comparison of the new form of regulation with the tools that are currently in use in Russia and other countries demonstrates its greater economic efficiency under uncertainty.

Sign in / Sign up

Export Citation Format

Share Document