scholarly journals Using the macromolecular composition to predict process settings that give high pellet durability in ring-die biomass pellet production

Fuel ◽  
2021 ◽  
Vol 283 ◽  
pp. 119267
Author(s):  
Sylvia H. Larsson ◽  
David A. Agar ◽  
Magnus Rudolfsson ◽  
Denilson da Silva Perez ◽  
Matthieu Campargue ◽  
...  
Author(s):  
David Ludín ◽  
Patrik Burg ◽  
Anna Krakowiak-Bal ◽  
Vladimir Višacki

The contribution describe the possibilities of using marc for manufacturing pellets for energy purposes. Experiments associated with pellet production were performed in several variants. Biomass pellet variants consisted of different percentages of vine shoots from vineyards, as well as marc and hay. These test variants were measured for their calorific value, which ranged between 17.36 and 19.21 MJ.kg−1. Bulk density was also determined, ranging between 619.27 and 630.9 kg.m−3. Pellets produced with marc content were also tested for mechanical durability, which was between 96.15 and 96.82% for the test variants. The calorific value, alongside other parameters assessed, shows favourable characteristics towards use in combustion processes. The results obtained show that in terms of the parameters analysed, marc pellets could be an attractive commodity for combustion.


2020 ◽  
Vol 6 ◽  
pp. 532-538 ◽  
Author(s):  
Teerasak Hudakorn ◽  
Noppong Sritrakul

2020 ◽  
Vol 154 ◽  
pp. 445-452 ◽  
Author(s):  
Lu Jiang ◽  
Bing Xue ◽  
Zhixiao Ma ◽  
Lu Yu ◽  
Beijia Huang ◽  
...  

Environments ◽  
2020 ◽  
Vol 7 (5) ◽  
pp. 39 ◽  
Author(s):  
Leonel J.R. Nunes ◽  
Mauro A.M. Raposo ◽  
Catarina I.R. Meireles ◽  
Carlos J. Pinto Gomes ◽  
Nuno M.C. Almeida Ribeiro

In Portugal, some species are now considered invasive by law and have proliferated in recent years. Among these, Acacia dealbata stands out. This work investigated the behavior of this species, in order to characterize and evaluate its potential as raw material for biomass pellets production, while controlling its proliferation. It was found that A. dealbata has a large capacity for raw material supply, as cutting 2 ha resulted in about 140 tons of biomass. Thus, the attribution of a market value for this material could result in a reduction in the area occupied by the invasive species, once the demand for it increases, causing a pressure over the resource. This pressure on the species must be duly followed by other control measures, such as reducing the population and mitigating its proliferation. Laboratory tests have shown that both the raw material and the finished product are similar to those obtained with other species normally used for biomass pellet production, such as Pinus pinaster and Eucalyptus globulus. Thus, it can be concluded that there is a high potential for this species in the production of biomass pellets for energy, and that this may be an important contribution to controlling the proliferation of this invasive species.


Author(s):  
Alexander S. Lelekov ◽  
Anton V. Shiryaev

The work is devoted to modeling the growth of optically dense microalgae cultures in natural light. The basic model is based on the idea of the two-stage photoautotrophic growth of microalgae. It is shown that the increase in the intensity of sunlight in the first half of the day can be described by a linear equation. Analytical equations for the growth of biomass of microalgae and its macromolecular components are obtained. As the initial conditions, it is assumed that at the time of sunrise, the concentration of reserve biomass compounds is zero. The simulation results show that after sunrise, the growth of the microalgae culture is due only to an increase in the reserve part of the biomass, while the structural part practically does not change over six hours. Changes in the ratio of the reserve and structural parts of the biomass indicate a change in the biochemical composition of cells.


2021 ◽  
Vol 13 (10) ◽  
pp. 5703
Author(s):  
Jaehwan Seo ◽  
Bon Joo Koo

Though biological and ecological characteristics of Scopimera globosa have been intensively investigated, little has been understood on bioturbation, especially sediment reworking. This study was designed to evaluate variation on sediment reworking of S. globosa based on feeding pellet production (FP) and burrowing pellet production (BP) with influencing factors and estimating the chlorophyll content reduction within the surface sediment by its feeding. The FP and BP largely fluctuated according to chlorophyll a concentration and crab density, but both were not influenced by temperature. The FP was enhanced by chlorophyll a concentration, whereas both FP and BP were restricted by crab density. The daily individual production was highest in spring, followed by fall and summer, with values of 25.61, 20.70 and 3.90 g ind.−1 d−1, respectively, while the total daily production was highest in fall, followed by summer and spring 2150, 1660 and 660 g m−2 d−1, respectively. The daily sediment reworking based on the FP and BP of Scopimera was highest in fall, followed by summer and spring, with values of 1.91, 1.70 and 0.77 mm d-1 and the annual sediment reworking rate of this species was calculated 40 cm year−1 based on its density in this study area. The chlorophyll a reduction ratio was estimated from 11 to 24% in one day by its feeding. These results imply that the sediment reworking of S. globosa is regulated by food abundance and its density, and Scopimera is an important bioturbator, greatly influencing biogeochemical changes in the intertidal sediments.


2021 ◽  
Vol 749 (1) ◽  
pp. 012047
Author(s):  
A Haryanto ◽  
R Nita ◽  
M Telaumbanua ◽  
S Suharyatun ◽  
U Hasanudin ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document