scholarly journals Analysis of time-varying mechanical systems using the method of impulsive parametric excitation

2015 ◽  
Vol 48 (1) ◽  
pp. 75-80
Author(s):  
T. Pumhössel ◽  
P. Hehenberger
Author(s):  
Jianping Wang ◽  
Pengfei Li ◽  
Ziying Wu ◽  
Minghong Zhang

In this study, a non-linear time-varying dynamic model of a spur gear pair system is used to investigate the dynamic behavior of the system by means of multiple scale approach. Both time-varying stiffness, transmission error and tooth backlash clearance of the system are taken into account in the model. The mesh stiffness fluctuation is developed as high order Fourier series and tooth backlash clearance is fitted by high order polynomial function. The frequency factors of the system are investigated and the frequency-response equations at the case of internal and external excitation, parametric excitation and combined excitation are obtained. The peak value of the amplitude of the primary resonance, super and sub harmonic resonance and combination harmonic under internal, external and parametric excitation are researched. The approaches of vibration reduction are investigated. Finally an example is investigated using the presented process and the results indicate the sensitivity and correctness of the presented analysis approaches.


Author(s):  
F. Zhang ◽  
B. J. Gilmore ◽  
A. Sinha

Abstract Tolerance allocation standards do not exist for mechanical systems whose response are time varying and are subjected to discontinuous forcing functions. Previous approaches based on optimization and numerical integration of the dynamic equations of motion encounter difficulty with determining sensitivities around the force discontinuity. The Alternating Frequency/Time approach is applied here to capture the effect of the discontinuity. The effective link length model is used to model the system and to account for the uncertainties in the link length, radial clearance and pin location. Since the effective link length model is applied, the equations of motion for the nominal system can be applied for the entire analysis. Optimization procedure is applied to the problem where the objective is to minimize the manufacturing costs and satisfy the constraints imposed on mechanical errors and design variables. Examples of tolerance allocation are presented for a single cylinder internal combustion engine.


Author(s):  
Yu Wang

Abstract A model is developed for analyzing mechanical systems with a pair of bodies with topological changes in their kinematic constraints. It is built upon the concept of Poincaré map rather than following the traditional methods of differential equations. The model provides a set of well-defined and naturally-discrete equations of motion and is capable of giving physical insights of dynamic characteristics of deadbeat convergence of multiple collisions and periodic or chaotic responses. The development of dynamic model and a local stability analysis are presented in Part 1, and the global analysis and numerical simulation are discussed in Part 2.


2019 ◽  
Vol 29 (09) ◽  
pp. 1930024
Author(s):  
Sergej Čelikovský ◽  
Volodymyr Lynnyk

A detailed mathematical analysis of the two-dimensional hybrid model for the lateral dynamics of walking-like mechanical systems (the so-called hybrid inverted pendulum) is presented in this article. The chaotic behavior, when being externally harmonically perturbed, is demonstrated. Two rather exceptional features are analyzed. Firstly, the unperturbed undamped hybrid inverted pendulum behaves inside a certain stability region periodically and its respective frequencies range from zero (close to the boundary of that stability region) to infinity (close to its double support equilibrium). Secondly, the constant lateral forcing less than a certain threshold does not affect the periodic behavior of the hybrid inverted pendulum and preserves its equilibrium at the origin. The latter is due to the hybrid nature of the equilibrium at the origin, which exists only in the Filippov sense. It is actually a trivial example of the so-called pseudo-equilibrium [Kuznetsov et al., 2003]. Nevertheless, such an observation holds only for constant external forcing and even arbitrary small time-varying external forcing may destabilize the origin. As a matter of fact, one can observe many, possibly even infinitely many, distinct chaotic attractors for a single system when the forcing amplitude does not exceed the mentioned threshold. Moreover, some general properties of the hybrid inverted pendulum are characterized through its topological equivalence to the classical pendulum. Extensive numerical experiments demonstrate the chaotic behavior of the harmonically perturbed hybrid inverted pendulum.


Author(s):  
Nicholas J. Miller ◽  
Steven W. Shaw

In this paper we explore parametric amplification of multidegree of freedom mechanical systems. We consider frequency conditions for modal interactions and determine stability conditions for three important cases. We develop conditions under which it is possible to sweep with direct and parametric excitation to produce a sweep response with amplified effective quality factor of resonances encountered during the sweep. With this technique it is possible to improve the measurement of resonance locations in swept devices, such as those that operate on resonance shifting. A numerical example motivated by a MEMS mass sensor is given in support of the analysis.


2010 ◽  
Vol 76 (768) ◽  
pp. 2117-2126 ◽  
Author(s):  
Takeshi HAYASHI ◽  
Fumihiko ASANO ◽  
Kazuaki KANEKO ◽  
Zhi-Wei LUO ◽  
Atsuo KATO

2007 ◽  
Vol 130 (1) ◽  
Author(s):  
Sripathi Vangipuram Canchi ◽  
Robert G. Parker

Parametric excitation of a rotating ring subject to moving time-varying stiffnesses has previously been investigated and given as closed-form expressions in the system parameters. These conditions are applied to identify ring gear parametric instabilities in a planetary gear system. Certain mesh phasing and contact ratio conditions suppress parametric instabilities, and these conditions are presented with examples.


Sign in / Sign up

Export Citation Format

Share Document