scholarly journals High pressure pre-treatment of Moringa oleifera seed kernels prior to aqueous enzymatic oil extraction

2017 ◽  
Vol 39 ◽  
pp. 129-136 ◽  
Author(s):  
Masni Mat Yusoff ◽  
Michael H. Gordon ◽  
Onyinye Ezeh ◽  
Keshavan Niranjan
1970 ◽  
Vol 4 (1) ◽  
Author(s):  
Suleyman A. Muyibi ◽  
Saad A. Abbas Megat Johari M. M. Noor Fakrul Razi Ahmadun

In this laboratory based study, varying quantities of oil, corresponding to 20 % w/w, 25 % w/w and 30 % w/w kernel weight extracted from Moringa oleifera seeds ( S1, S2, S3) respectively  were applied in the coagulation of model turbid water (kaolin suspension) and turbid river water samples from River Batang Kali and River Selangor in Malaysia to determine the percentage oil removed which gave the best coagulation efficiency. For model turbid water (kaolin suspension) coagulation of low turbidity of 35 NTU, medium turbidity of 100 NTU and high turbidity of 300 NTU, sample S2  gave the best turbidity removal corresponding to 91.7%, 95.5% and 99% respectively. Application of sample S2 to River Batang Kali with low initial turbidity of 32 NTU and high initial turbidity of 502 NTU gave a highest turbidity removal of 69% and 99% respectively. Application to River Selangor with medium initial turbidity- of 87 NTU and high initial turbidity of 466 NTU gave a highest residual turbidity' of 94% and 98.9%,  respectively.Key words: Moringa oleifera seed, selective oil extraction, coagulation, model turbid water (kaolin suspension), river water, turbidity removal.


2013 ◽  
Vol 4 (10) ◽  
pp. 106-110
Author(s):  
Neeraj Agnihotri ◽  
Vinay Pathak ◽  
Naseema Khatoon ◽  
Masihur Rahman

2016 ◽  
Vol 23 (7) ◽  
pp. 645-649 ◽  
Author(s):  
José H.E.S. Freitas ◽  
Keissy V. de Santana ◽  
Pollyanna M. da Silva ◽  
Maiara C. de Moura ◽  
Luana C.B.B. Coelho ◽  
...  

2017 ◽  
Vol 329 ◽  
pp. 102-109 ◽  
Author(s):  
William K. Garde ◽  
Steven G. Buchberger ◽  
David Wendell ◽  
Margaret J. Kupferle

2020 ◽  
Vol 15 (3) ◽  
pp. 15-23
Author(s):  
J.B. Hussein ◽  
J.O.Y. Ilesanmi ◽  
H.M Aliyu ◽  
V. Akogwu

The possible combination of cowpea with moringa seed flour for the production of nutrient dense moimoi (steamed cowpea paste) and akara (deep-fat fried balls) were investigated. Composite blends of cowpea and moringa seed flour in different proportions (98:2, 96:4 and 94:6) were used in moimoi and akara production while 100% cowpea flour served as control. The proximate and sensory analyses of the products were determined using standard methods. The results showed a positive influence in the proximate compositions of these products as the proportion of moringa seed flour substitution increased. The moimoi samples ranged between 10.77 – 26.92%, 18.27 – 21.16%, 8.12 – 10.72%, 1.80 – 2.19%, 0.76 – 0.84%, 44.07 – 53.99% and 269.87 – 335.18 Kcal/100g while akara samples ranged between 9.73 – 10.77%, 19.51 – 22.12%, 7.41 – 9.90%, 2.39 – 2.71%, 0.87 – 0.93%, 54.69 – 59.00% and 320.26 – 332.08 Kcal/100g respectively for moisture contents, protein contents, crude fats, ash, crude fibers, carbohydrates and energy values. The sensory evaluation results of these products favourably competed with the control except samples D (94:6) which showed a slight difference in all parameters tested. Thus, the substitution of cowpea with moringa seed flour up to 2% and 4% proportions are adequate to produce acceptable moimoi and akara, respectively.The possible combination of cowpea with moringa seed flour for the production of nutrient dense moimoi (steamed cowpea paste) and akara (deep-fat fried balls) were investigated. Composite blends of cowpea and moringa seed flour in different proportions (98:2, 96:4 and 94:6) were used in moimoi and akara production while 100% cowpea flour served as control. The proximate and sensory analyses of the products were determined using standard methods. The results showed a positive influence in the proximate compositions of these products as the proportion of moringa seed flour substitution increased. The moimoi samples ranged between 10.77 – 26.92%, 18.27 – 21.16%, 8.12 – 10.72%, 1.80 – 2.19%, 0.76 – 0.84%, 44.07 – 53.99% and 269.87 – 335.18 Kcal/100g while akara samples ranged between 9.73 – 10.77%, 19.51 – 22.12%, 7.41 – 9.90%, 2.39 – 2.71%, 0.87 – 0.93%, 54.69 – 59.00% and 320.26 – 332.08 Kcal/100g respectively for moisture contents, protein contents, crude fats, ash, crude fibers, carbohydrates and energy values. The sensory evaluation results of these products favourably competed with the control except samples D (94:6) which showed a slight difference in all parameters tested. Thus, the substitution of cowpea with moringa seed flour up to 2% and 4% proportions are adequate to produce acceptable moimoi and akara, respectively. Keywords: Moimoi, Akara, Cowpea flour, Moringa oleifera seed flour and Sensory properties: Moimoi, Akara, Cowpea flour, Moringa oleifera seed flour and Sensory properties


2021 ◽  
pp. 1-47
Author(s):  
Alessandra Marjorie de Oliveira ◽  
Márcia Maria dos Anjos Szczerepa ◽  
Maria Cristina Bronharo Tognim ◽  
Benício Alves de Abreu Filho ◽  
Lúcio Cardozo-Filho ◽  
...  

2000 ◽  
Vol 42 (9) ◽  
pp. 235-241 ◽  
Author(s):  
M. Barjenbruch ◽  
H. Hoffmann ◽  
O. Kopplow ◽  
J. Tränckner

Several reasons can lead to the emergence of foam in digesting tanks, for instance overloading or the impact of hydrophobic substances. Furthermore, the foaming is in regular periods going together with the emergence of filamentous microorganisms. Up to now, several strategies to avoid foaming have been tested out (for instance reduction of the sludge load in the activated sludge stage, lowering of the sludge level in the digestion tank, dosage of anti foaming agents), but these have been done relatively unsystematically and with more or less success. For our contribution, laboratory-scale digestion tests were run to analyse mechanical and thermal pre-treatment methods for the destruction of the surplus sludge. Whereas the disintegration by a high pressure homogeniser did only achieve a low reduction of the foam phase, the thermal pre-treatment at 121°C made for an effective subduing of the foam emergence. Both methods allowed for a cutting up of the filaments, but only the heating up effected the reduction of the hydrophobic substances; thus, the foaming is possibly caused by them.


Sign in / Sign up

Export Citation Format

Share Document