Design of a chemical sensing circular photonic crystal fiber with high relative sensitivity and low confinement loss for terahertz (THz) regime

Optik ◽  
2020 ◽  
Vol 222 ◽  
pp. 165359
Author(s):  
Md. Selim Hossain ◽  
Shuvo Sen ◽  
Md. Mahabub Hossain
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Chemical Sensing ◽  
Relative Sensitivity ◽  
Confinement Loss ◽  
Crystal Fiber

scholarly journals A Highly Birefringent Photonic Crystal Fiber for Terahertz Spectroscopic Chemical Sensing

Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1799
Author(s):  
Tianyu Yang ◽  
Liang Zhang ◽  
Yunjie Shi ◽  
Shidi Liu ◽  
Yuming Dong
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Chemical Sensing ◽  
Numerical Aperture ◽  
Wide Band ◽  
Relative Sensitivity ◽  
Chemical Sensitivity ◽  
High Birefringence ◽  
Crystal Fiber ◽  
Polarization Maintaining

A photonic crystal fiber (PCF) with high relative sensitivity was designed and investigated for the detection of chemical analytes in the terahertz (THz) regime. To ease the complexity, an extremely simple cladding employing four struts is adopted, which forms a rectangular shaped core area for filling with analytes. Results of enormous simulations indicate that a minimum 87.8% relative chemical sensitivity with low confinement and effective material absorption losses can be obtained for any kind of analyte, e.g., HCN (1.26), water (1.33), ethanol (1.35), KCN (1.41), or cocaine (1.50), whose refractive index falls in the range of 1.2 to 1.5. Besides, the PCF can also achieve high birefringence (∼0.01), low and flat dispersion, a large effective modal area, and a large numerical aperture within the investigated frequency range from 0.5 to 1.5 THz. We believe that the proposed PCF can be applied to chemical sensing of liquid and THz systems requiring wide-band polarization-maintaining transmission and low attenuation.

Sensing of Illegal Drugs by Using Photonic Crystal Fiber in Terahertz Regime

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Shaymaa Riyadh Tahhan ◽  
Hadeel K. Aljobouri
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Relative Sensitivity ◽  
Confinement Loss ◽  
Crystal Fiber ◽  
The Core ◽  
Stimulant Abuse ◽  
Element Simulation ◽  
Effective Mode Area ◽  
Mode Area

AbstractStimulant abuse enhances dopamine release, thereby causing increased excitation. Any extent of stimulant abuse can considerably harm the user. Thus, methods of detecting stimulants must be precise, accurate, and reliable. A novel terahertz (THz) photonic crystal fiber with a Topas substrate is designed and rigorously investigated for detecting liquid amphetamine, cocaine, and ketamine. The fiber structure has a pentagonal shape and comprises circular air holes in the core and cladding spatial extents. As shown in finite element simulation, the proposed fiber yields a high relative sensitivity of approximately 80 % when any of the liquid stimulants is infiltrated in the core air holes. At 1 THz operating frequency, the proposed fiber produces a large effective mode area, negligible confinement loss, and extremely low bending and effective material losses. Other THz waveguiding properties, such as core power fraction and total loss, are also studied. Lastly, a positive and negative 2 % fabrication tolerance is set to ensure seamless potential practical realization of the fiber.

scholarly journals Comparative Analysis of Highly Sensitive PCF for Chemical Sensing in THz Regime

2020 ◽  
Vol 12 (4) ◽  
pp. 94
Author(s):  
Mohammad Saiful Islam ◽  
Anwar Sadath ◽  
Md. Rakibul Islam ◽  
Mohammad Faisal
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Chemical Sensing ◽  
High Sensitivity ◽  
Confinement Loss ◽  
Core Diameter ◽  
Frequency Spectra ◽  
Crystal Fiber ◽  
Sensing Applications ◽  
Design Structure

Nowadays photonic crystal fiber (PCF) is used for sensing purposes in different fields. In this work, we have proposed a PCF based chemical (Benzene and Ethanol) sensor. Finite Element Method (FEM) based software COMSOL 5.3a is used to investigate the numerical characteristics for the proposed structure. From the numerical analysis, we obtained high sensitivity with low losses for an optimum core diameter of 210 µm. Our proposed PCF works on a broad range of core diameters and THz frequency spectra. The fabrication of this model is very simple due to its simplistic design structure. Full Text: PDF ReferencesMd.F.H. Arif, Md.J.H. Biddut, "A new structure of photonic crystal fiber with high sensitivity, high nonlinearity, high birefringence and low confinement loss for liquid analyte sensing applications", Sensing Bio-Sensing Res. 12, 8 (2017). CrossRef P. Kumar, Md.H. Bikash, K. Ahmed, S. Sen, "A Novel Hexahedron Photonic Crystal Fiber in Terahertz Propagation: Design and Analysis", Photonics 6(1), 32 (2019). CrossRef S. Asaduzzaman, K. Ahmed, T. Bhuiyan, T. Farah, "Hybrid photonic crystal fiber in chemical sensing", SpringerPlus 5, 748 (2016). CrossRef Md.S. Islam, J. Sultana, J. Atai, D. Abbott, S. Rana, M.R. Islam, "Ultra low-loss hybrid core porous fiber for broadband applications", App. Opt. 56(4), 1232 (2017). CrossRef S. Atakaramians, S. Afshar, H. Ebendorff-Heidepriem, M. Nagel, B.M. Fischer, D. Abbott, T.M. Monro, "THz porous fibers: design, fabrication and experimental characterization", Opt. Expr. 17(16), 14053 (2009). CrossRef

scholarly journals Theoretical Considerations of Photonic Crystal Fiber with All Uniform-Sized Air Holes for Liquid Sensing

Photonics ◽  
2021 ◽  
Vol 8 (7) ◽  
pp. 249
Author(s):  
Abdul Mu’iz Maidi ◽  
Pg Emeroylarffion Abas ◽  
Pg Iskandar Petra ◽  
Shubi Kaijage ◽  
Nianyu Zou ◽  
...  
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Nonlinear Coefficient ◽  
Numerical Aperture ◽  
Relative Sensitivity ◽  
Effective Area ◽  
Confinement Loss ◽  
Crystal Fiber ◽  
Sensing Applications ◽  
Liquid Sensing

A novel liquid-infiltrated photonic crystal fiber model applicable in liquid sensing for different test liquids—water, ethanol and benzene—has been proposed. One core hole and three air hole rings have been designed and a full vector finite element method has been used for numerical investigation to give the best results in terms of relative sensitivity, confinement loss, power fraction, dispersion, effective area, nonlinear coefficient, numerical aperture and V-Parameter. Specially, the assessed relative sensitivities of the proposed fiber with water, ethanol and benzene are 94.26%, 95.82% and 99.58%, respectively, and low confinement losses of 1.52 × 10−11 dB/m with water, 1.21 × 10−12 dB/m with ethanol and 6.01 × 10−16 dB/m with benzene, at 1.0 μm operating wavelength. This novel PCF design is considered simple and can be easily fabricated for practical use, and the assessed waveguide properties has determined the potential applicability in real liquid sensing applications.

scholarly journals High sensitive triangular photonic crystal fiber sensor design applicable for gas detection

2021 ◽  
Vol 10 (1) ◽  
pp. 1-5
Author(s):  
A. Abbaszadeh ◽  
S. Makouei ◽  
S. Meshgini
Keyword(s):  
Photonic Crystal ◽  
Gas Sensor ◽  
Photonic Crystal Fiber ◽  
Relative Sensitivity ◽  
Effective Area ◽  
Industrial Applications ◽  
Confinement Loss ◽  
The Finite Element Method ◽  
High Birefringence ◽  
Crystal Fiber

A new triangular photonic crystal fiber with a based microstructure core gas sensor has been proposed for the wavelength range from 1.1μm to 1.7μm. The guiding trait of the proposed structure depends on geometric parameters and wavelength, which are numerically studied by the finite element method. According to the results, the relative sensitivity obtained as high as 75.14% at 1.33μm wavelength. high birefringence and effective area are also obtained by order of 3.75×10-3 and 14.07 μm2 finally, low confinement loss of 1.41×10-2 dB/m is acquired at the same wavelength. The variation of the diameters in the cladding and core region is investigated and the results show that this structure has good stability for manufacturing goals. Since the results show the highest sensitivity at wavelengths around 1.2μm to 1.7μm, which is the absorption line of many gases such as methane (CH4), hydrogen fluoride (HF), ammonia (NH3), this gas sensor can be used for medical and industrial applications.

scholarly journals Characteristics of Ultrasensitive Hexagonal-Cored Photonic Crystal Fiber for Hazardous Chemical Sensing

Photonics ◽  
2022 ◽  
Vol 9 (1) ◽  
pp. 38
Author(s):  
Abdul Mu’iz Maidi ◽  
Norazanita Shamsuddin ◽  
Wei-Ru Wong ◽  
Shubi Kaijage ◽  
Feroza Begum
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Chemical Sensing ◽  
Chromatic Dispersion ◽  
Relative Sensitivity ◽  
Crystal Fiber ◽  
Hazardous Chemical ◽  
Sensing Applications ◽  
Vector Finite Element Method ◽  
Vector Finite Element

A highly sensitive non-complex cored photonic crystal fiber sensor for hazardous chemical sensing with water, ethanol, and benzene analytes has been proposed and is numerically analyzed using a full-vector finite element method. The proposed fiber consists of a hexagonal core hole and two cladding air hole rings, operating in the lower operating wavelength of 0.8 to 2.6 µm. It has been shown that the structure has high relative sensitivity of 94.47% for water, 96.32% for ethanol and 99.63% for benzene, and low confinement losses of 7.31 × 10−9 dB/m for water, 3.70 × 10−10 dB/m ethanol and 1.76 × 10−13 dB/m benzene. It also displays a high power fraction and almost flattened chromatic dispersion. The results demonstrate the applicability of the proposed fiber design for chemical sensing applications.

scholarly journals Proposal for a Quad-Elliptical Photonic Crystal Fiber for Terahertz Wave Guidance and Sensing Chemical Warfare Liquids

Photonics ◽  
2019 ◽  
Vol 6 (3) ◽  
pp. 78 ◽  
Author(s):  
Izaddeen Yakasai ◽  
Pg Emeroylariffion Abas ◽  
Shubi F Kaijage ◽  
Wahyu Caesarendra ◽  
Feroza Begum
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Fractional Power ◽  
Relative Sensitivity ◽  
Chemical Warfare ◽  
Confinement Loss ◽  
Thz Radiation ◽  
High Birefringence ◽  
Crystal Fiber ◽  
Power Fraction

A porous-core photonic crystal fiber based on a cyclic olefin homopolymer (Zeonex) is proposed; it shows high birefringence, high core power fraction, low losses, and near-zero flat dispersion. The fiber’s core was designed with quad-elliptical (QE) air holes with its center occupied by bulk background material. The superiority of the QE design over the commonly adopted tri- and penta-elliptical (TE and PE) core designs is demonstrated. The presence of the bulk material at the core center and the geometrical configuration cause a broad contrast in phase refractive indices, thereby producing high birefringence and low transmission losses. A high birefringence of 0.096 was obtained at 1.2 THz, corresponding to a total loss of 0.027 cm−1 and core power fraction of approximately 51%. The chromatic dispersion and effective area of the reported fiber were also characterized within a frequency range of 0.4–1.6 THz. The QE air holes were then filled with chemical warfare agents, namely, tabun and sarin liquids. Then, the relative sensitivity, confinement loss, fractional power flow, and effective material loss (EML) of the sensor were calculated. Nearly the same relative sensitivity (r = 64%) was obtained when the QE core was filled with either liquid. Although the obtained EML for tabun was 0.033 cm−1 and that for sarin was 0.028 cm−1, the confinement loss of the fiber when it was immersed in either liquid was negligible. The proposed fiber can be fabricated using existing fabrication technologies. Moreover, it can be applied and utilized as a THz radiation conveyor in a terahertz time domain spectroscopy system for remote sensing of chemical liquids in the security and defense industries.

scholarly journals Design and Simulation of Photonic Crystal Fiber for Liquid Sensing

Photonics ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 16
Author(s):  
Abdul Mu’iz Maidi ◽  
Izaddeen Yakasai ◽  
Pg Emeroylariffion Abas ◽  
Malik Muhammad Nauman ◽  
Rosyzie Anna Apong ◽  
...  
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Simple Structure ◽  
Chromatic Dispersion ◽  
Nonlinear Coefficient ◽  
Hexagonal Lattice ◽  
Relative Sensitivity ◽  
Effective Area ◽  
Confinement Loss ◽  
Crystal Fiber

A simple hexagonal lattice photonic crystal fiber model with liquid-infiltrated core for different liquids: water, ethanol and benzene, has been proposed. In the proposed structure, three air hole rings are present in the cladding and three equal sized air holes are present in the core. Numerical investigation of the proposed fiber has been performed using full vector finite element method with anisotropic perfectly match layers, to show that the proposed simple structure exhibits high relative sensitivity, high power fraction, relatively high birefringence, low chromatic dispersion, low confinement loss, small effective area, and high nonlinear coefficient. All these properties have been numerically investigated at a wider wavelength regime 0.6–1.8 μm within mostly the IR region. Relative sensitivities of water, ethanol and benzene are obtained at 62.60%, 65.34% and 74.50%, respectively, and the nonlinear coefficients are 69.4 W−1 km−1 for water, 73.8 W−1 km−1 for ethanol and 95.4 W−1 km−1 for benzene, at 1.3 µm operating wavelength. The simple structure can be easily fabricated for practical use, and assessment of its multiple waveguide properties has justified its usage in real liquid detection.

Sign in / Sign up

Export Citation Format

Share Document