scholarly journals The influence of the gravity force on instabilities of the floating droplet

Author(s):  
Ilya Simanovskii ◽  
Antonio Viviani ◽  
Frank Dubois ◽  
Patrick Queeckers
Keyword(s):  
2015 ◽  
Vol 96 ◽  
pp. 23-34 ◽  
Author(s):  
V. Ayel ◽  
L. Araneo ◽  
A. Scalambra ◽  
M. Mameli ◽  
C. Romestant ◽  
...  

2011 ◽  
Vol 2011 ◽  
pp. 1-8
Author(s):  
Piotr Szablewski

In many problems from the field of textile engineering (e.g., fabric folding, motion of the sewing thread) it is necessary to investigate the motion of the objects in dynamic conditions, taking into consideration the influence of the forces of inertia and changing in the time boundary conditions. This paper deals with the model analysis of the motion of the flat textile structure using Lagrange's equations in two variants: without constraints and with constraints. The motion of the objects is under the influence of the gravity force. Lagrange's equations have been used for discrete model of the structure.


2016 ◽  
Vol 823 ◽  
pp. 277-282
Author(s):  
Viorica Velișcu ◽  
Dan Mesarici ◽  
Păun Antonescu

The paper presents a structural analysis of the complex mechanisms type screw-jack. The mechanism mobilityanalysis using various generally applicable formulas has been performed. A newkinematic scheme of the jack linkage has been proposed. Besides the actuatorscrew, it has a planar kinematic chain with articulated bars. With regard tothis new mechanism, an algorithm for static calculus has been developed, inwhich the automobile gravity force is the main exterior force.


2021 ◽  
Author(s):  
Borihan Butsanlee ◽  
Sureeporn Numsumlee ◽  
Watcharin Po-ngaen

2021 ◽  
Vol 66 (3) ◽  
pp. 369-375
Author(s):  
E. V. Galaktionov ◽  
N. E. Galaktionova ◽  
E. A. Tropp

1969 ◽  
Vol 9 (03) ◽  
pp. 293-300 ◽  
Author(s):  
J.E. Varnon ◽  
R.A. Greenkorn

Abstract This paper reports an investigation of unstable fingering in two-fluid flow in a porous medium to determine if lambda the dimensionless finger width, is unique For a viscous finger A is the ratio of finger width to the distance between the tips of the two trailing fingers adjacent to the leading finger. For a gravity finger lambda is defined as the ratio of finger width, to "height" of the medium perpendicular to hulk flow. This work confirms previous experiments and existing theory that for viscous fingering lambda approaches a value of 0.5 with increasing ratio of viscous to interfacial force. However, for a given fluid pair and given, medium, this ratio can he increased only by increasing the, velocity. Experiments on gas liquid systems show that the asymptotic value of lambda with velocity is not always 0.5. Apparently, for gas-liquid systems, the influence of the interfacial force cannot always he eliminated by increasing the velocity. For such systems lambda is a function of fluid pair and media permeability. If the gravity force normal to the hulk permeability. If the gravity force normal to the hulk flow is active, it damps out the viscous fingers except for an underlying or overlying finger. The dimensionless width of this gravity finger strongly depends on velocity and height of the medium, as well as the fluid and media properties. The existing experiments and theories are reviewed and the gravity, stable, and viscous flow regimes are described in view of these experiments and theories. The existence of a gravity-dominated unstable regime, a gravity-viscous balanced stable regime, and a viscous-anminated regime was demonstrated experimentally by increasing flow velocity bin a rectangular glass head model. Asymptotic values of the dimensionless finger width were determined in various-sized Hele-Shaw models with gravity perpendicular and parallel to flow. The dimensionless perpendicular and parallel to flow. The dimensionless finger width lambda was determined as a function of applied force, flow resistance, and fluid properties. The results are interpreted dimensionally. Some comments are made concerning possible scaling and meaningful extensions of theory to describe these regimes in three-dimensional flow. Previous description of unstable two-fluid flow in porous media is mainly restricted to studies of viscous-dominated instability. The direction of this study is to provide data and understanding to consider the more realistic problem of predicting flow in three dimensions that may result in instabilities that are combinations of all, four flow regimes. Introduction The unstable flow of two fluids is characterized by interface changes between the fluids as a result of changes in relative forces. In a given porous medium and for a given fluid pair the gravity force dominates flow at low displacement velocities. As the velocity increases the viscous forces begin to affect flow significantly, and eventually there is a balance between effects of the gravity and viscous forces. As velocity increases further, the viscous force dominates flow. In the plane parallel to gravity, four flow regimes result as the velocity is increased: a gravity-induced stable flow regime; a gravity-dominated unstable flow regime; a stable regime resulting from a balance between gravity and viscous forces; and a viscous-induced unstable flow regime. The gravity-induced stable regime is represented schematically in Fig. 1a. This general flow pattern persists with the displacing fluid contacting all of persists with the displacing fluid contacting all of the in-place fluid until the interface becomes parallel to the bulk flow. At this velocity a gravity finger forms, and the interface, is unstable in that the length of the gravity finger grows and the fluid behind the nose of the finger is practically nonmobile because of the small pressure gradient along the finger. The gravity-dominated unstable flow is shown schematically in Fig. 1b. As the injection rate is increased, the gravity finger thickens, perhaps until it spans the medium creating a stable interface where all of the in-place, fluid is again mobile. This regime would, not occur in the absence of gravity. It occurs due to the counter effects of the gravity and viscous forces (Fig. 1c). As the velocity of the displacing fluid increases, the viscous forces dominate, and, the interface breaks into viscous fingers (Fig. 1d). SPEJ p. 293


2006 ◽  
Vol 3 (4) ◽  
pp. 191-198 ◽  
Author(s):  
Nicolas J Vos ◽  
Dirk J Riemersma

AbstractSlippery surfaces are a continuous concern in equine veterinary practice during both treatment and orthopaedic work-ups, especially when horses have to trot on circles. Sliding of the equine foot on the ground with the potential of injury is prevented if the horizontally acting accelerating or decelerating forces on the foot do not exceed maximal friction. Friction can be calculated and therefore anticipated if the coefficient of friction (μ) between the foot of the horse and the particular ground surface is known. Friction between shod and unshod cadaver equine hooves and different ground surfaces (concrete, tarmac and rubber) was determined by pulling the hooves horizontally in a uniform motion. Horizontal forces (Fh) were measured on a force plate and with a portable digital electronic force meter. The coefficient of friction (μ) was calculated as the quotient between Fh and the gravity force (N) of the object, hence: μ = Fh /N. This study has shown that the coefficient of friction between equine hooves and a specific ground surface can be determined using a portable digital force meter or a force plate. Friction significantly depended not only on the type of surface but also on shoeing of the equine foot. Bare feet showed more friction with the hard surfaces (bricks and tarmac), the shod feet showing more friction with the rubber surfaces. Coefficients of friction could be used to estimate the possibility of injuries occurring in the equine industry during exercise and/or lameness or pre-purchase examinations.


2009 ◽  
Vol 2009 ◽  
pp. 1-5 ◽  
Author(s):  
Minerva Vargas ◽  
Marina E. Rincón ◽  
Eduardo Ramos

The elaboration of bilayerTiO2/CNTfilms dried under terrestrial gravity conditions (g) and on a centrifuge with 1.3gand 7gis reported. The changes in microstructure and thickness of these coatings under supergravity environment cause a red-shift tendency in the optical properties at increasing values of acceleration. Experiments of a drop under enhanced gravity force in the range of 3.7 < Bo (bond number) < 51.5 suggest the incomplete elimination of surfactant-water molecules in theTiO2/CNTbilayer film. Increasing acceleration up to 14gwill widen the optical differences found, proving the layer-by-layer solution-chemical method in combination with these drying protocols, an alternative to produce thickness-sensitive solar-selective absorbing coatings.


Sign in / Sign up

Export Citation Format

Share Document