Improved Bioavailability of Oxcarbazepine, a BCS class II drug by Centrifugal Melt Spinning: In-vitro and in-vivo Implications

2021 ◽  
pp. 120775
Author(s):  
Sidra Nasir ◽  
Amjad Hussain ◽  
Nasir Abbas ◽  
Nadeem Irfan Bukhari ◽  
Fahad Hussain ◽  
...  
Keyword(s):  
Melt Spinning ◽  
Class Ii ◽  
Bcs Class Ii

scholarly journals ENHANCEMENT OF SOLUBILITY AND BIOAVAILABILITY OF BCS CLASS-II AMBRISENTAN: IN VITRO, IN VIVO AND EX VIVO ANALYSIS

2022 ◽  
pp. 67-74
Author(s):  
RAHUL RADKE ◽  
NEETESH K. JAIN
Keyword(s):  
Solid Dispersion ◽  
Ex Vivo ◽  
Class Ii ◽  
Water Soluble ◽  
Pure Form ◽  
In Vitro Dissolution ◽  
Drug Solubility ◽  
Bcs Class Ii

Objective: The aim of this investigation was to enhance the solubility and bioavailability of the BCS class II poorly water-soluble drug ambrisentan by solid dispersion (SD) techniques using Gelucire 50/13 as a hydrophilic carrier. Methods: Solid dispersion of ambrisentan was prepared by kneading method using different dug: carrier ratios. Prepared SD was characterized for solubility, drug content, percentage yield, in vitro dissolution, ex vivo permeation and bioavailability. Solid-state characterization was performed by differential scanning calorimetry (DSC), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Results: All the SDs formulations showed increase in drug solubility and dissolution when compared with its pure form. Aqueous solubility of the drug was found to be increased 8.23 fold in SD. DSC study showed that endothermic peak of the drug was disappeared in spectra of SD, confirming its amorphous conversion, XRD study revealed the reduction to almost absence of specific high-intensity peaks of drug which confirmed the reduction of crysatallinity of ambrisentan in SD. SEM of optimized SD formulation demonstrates the complete encapsulation and solubilization drug. In vitro dissolution study showed that optimized SD formulation (ASD4) gives the faster drug release of 101.5% in 60 min, as compare to its pure form and other SD formulations. Conclusion: Solid dispersion ASD4 prepared with 1:4 drug to carrier ratio showed the highest drug solubility and in vitro dissolution. The ex vivo and in vivo studies performed on optimized formulation ASD4 showed enhancement in drug permeability and bioavailability in Gelucire 50/13 based SD formulation.

Improved Efficacy of Lovastatin from Soluplus-PEG Hybrid Polymer- Based Binary Dispersions

2020 ◽  
Vol 16 (8) ◽  
pp. 1164-1171
Author(s):  
Radhika Verma ◽  
Manju Nagpal ◽  
Thakur G. Singh ◽  
Manjinder Singh ◽  
Geeta Aggarwal
Keyword(s):  
Drug Release ◽  
Solid Dispersions ◽  
Class Ii ◽  
Hybrid Polymer ◽  
In Vitro Drug Release ◽  
In Vivo Efficacy ◽  
Bcs Class Ii ◽  
Individual Polymer

Background: Lovastatin is a statin drug used for lowering cholesterol in those with hypercholesterolemia to reduce the risk of cardiovascular disease. It is a BCS class II drug i.e. it has low aqueous solubility and high permeability. Objective: Improvement of solubility and in vivo efficacy was investigated by formulating binary solid dispersions. Methods: Binary solid dispersions of lovastatin were formulated in the current study using two polymers i.e. Soluplus and PEG 4000. Seven batches of solid dispersions were prepared (S1, P1, SP1, SP2, SP3, SP4, and SP5) via the solvent evaporation method. The prepared dispersions were evaluated for equilibrium solubility, FTIR, XRD, DSC, SEM studies, and further in vitro drug release were evaluated. The results revealed significant enhancement in the solubility of drug-using polymer hybrids as compared to that of individual polymer dispersion batches. Results: A significant solubility enhancement was observed with SP5 (approx 40 times) having a higher concentration of Soluplus. FTIR studies indicated no drug to polymer interaction. DSC studies revealed complete amorphization of polymer and also X-RD data is also in compliance with DSC results. In vitro drug release studies showed almost 100% release in 2h in polymer hybrid batches in comparison to individual polymer batch (S1 and P1). The best dissolution characteristics were observed in SP3 and SP5 which is also in compliance with solubility data. Further in vivo efficacy studies revealed a significant reduction in LDL, HDL, TG, AST, and ALT levels in comparison to pure drug lovastatin group and hypercholesterolemia control group. Conclusion: Hybrid polymer may be a prospective carrier system for the enhancement of solubility of BCS class II drugs.

Synthesis, Characterization and In Vitro-In Vivo Evaluation of Carboxymethylated Badam Gum Derivative for Improving Dissolution Behaviour of BCS Class-II Drug

2016 ◽  
Vol 8 (8) ◽  
pp. 635-645
Author(s):  
D. V. Gowda ◽  
A. S. Aravind Ram ◽  
Atul Srivastava ◽  
P. K. Kulkarni ◽  
Riyaz AliM. Osmani ◽  
...  
Keyword(s):  
Class Ii ◽  
In Vivo Evaluation ◽  
Bcs Class Ii ◽  
Dissolution Behaviour

Formulation and Characterization of Glimepiride Nanoparticles for Dissolution Enhancement

2020 ◽  
Vol 10 (5) ◽  
pp. 649-663
Author(s):  
Reena Siwach ◽  
Parijat Pandey ◽  
Harish Dureja
Keyword(s):  
Drug Release ◽  
Dissolution Rate ◽  
Oral Absorption ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Class Ii ◽  
Dissolution Enhancement ◽  
In Vitro Drug Release ◽  
Bcs Class Ii

Background: The rate-limiting step in the oral absorption of BCS class II drugs is dissolution. Their low solubility is one of the major obstacles in the process of drug development. Dissolution rate can be increased by decreasing the particle size to the nano range, eventually leading to increased bioavailability. Objective: : In the present study, glimepiride loaded nanoparticles were prepared to enhance the dissolution rate. The aim of the work was to examine the effect of polymer-drug ratio, solvent-antisolvent ratio and speed of mixing on in vitro release of glimepiride. Methods: Glimepiride is an antidiabetic drug belonging to the BCS class II drugs. The polymeric nanoparticles were formulated according to Box-Behnken Design (BBD) using nanoprecipitation technique. The prepared nanoparticles were evaluated for in vitro drug release, loading capacity, entrapment efficiency, and percentage yield. Result: It was found that NP-8 has maximum in vitro drug release and was selected as an optimized batch. Analysis of Variance (ANOVA) was applied to the in vitro drug release to study the fitness and significance of the model. The batch NP-8 showed 70.34 ± 1.09% in vitro drug release in 0.1 N methanolic HCl and 92.02 ± 1.87% drug release in phosphate buffer pH 7.8. The release data revealed that the nanoparticles followed zero order kinetics. Conclusion: The study revealed that the incorporation of glimepiride into gelucire 50/13 resulted in enhanced dissolution rate.

Sign in / Sign up

Export Citation Format

Share Document