Sanger sequencing of mitochondrial hypervariable region of ancient samples for DNA authentication and screening before high-throughput sequencing

2021 ◽  
Vol 40 ◽  
pp. 103216
Author(s):  
Anna Šenovská ◽  
Eva Drozdová ◽  
Kristýna Brzobohatá ◽  
Eva Chocholová ◽  
Dana Fialová ◽  
...  
Blood ◽  
2019 ◽  
Vol 134 (Supplement_1) ◽  
pp. 3028-3028
Author(s):  
Azahara Fuentes ◽  
Alicia Serrano ◽  
Blanca Ferrer Lores ◽  
Veronica Lendinez ◽  
Carolina Monzo ◽  
...  

Introduction: Determination of the mutational status of rearranged immunoglobulin heavy chain variable (IgHV) genes in patients with Chronic Lymphocytic Leukaemia (CLL), is considered one of the most important prognostic factors: patients with unmutated IgHV (UM; ≥98% of identity to the germline) genes have a more aggressive disease course and develop more frequently unfavourable genetic deletions or mutations than patients with mutated IgHV (M; ≤98%). Mutational status, is currently determined by Sanger sequencing (Sseq) that allows the analysis of the major clone, however, international guidelines recommend caution in assigning mutational status in cases with "Borderline" IgHV identity (97-97.9%), and cases with double rearrangements with discordant mutational status. Objective: Analyze and determine the mutational status of the IgHV locus by High-throughput sequencing (HTS), in a cohort of CLL patients (n=51) with unclassifiable Sseq results: borderline status (n=22); double rearrangements (n=27) with discordant mutational status (n=2). Methods: We included 51 DNA samples extracted from peripheral blood of patients diagnosed of CLL according to the National Cancer Institute Working Group guidelines in our institution between 1986 and 2019 (median absolute lymphocytes 11.4x109/L [2,8-239,5x109/L]). Sseq amplification and analysis of IgHV rearrangements were performed on DNA conforming to the updated ERIC recommendations. In all the cases we were able to determinate the IGVH identity. To switch high-throughput sequencing to the clinical practice, we assessed the reliability of different library preparation methods to sequence IGH locus in patients with CLL. Amplification was performed using the Sequencing Multiplex Kit based on IGH FR (forward primers) and consensus JH (reverse primer) multiplex. PCR products were purified using Magsi-NGS Prep magnetic beads (Magnamedics Diagnostics), normalized and pooled to create a library for sequencing using a MiSeq equipment. To simplify and make automatic the analysis of the same we developed a specific bioinformatic pipeline that covers from preprocessing to final data summarization and interpretation. The backbone of the analysis includes read preprocessing, mapping against IMGT reference sequences, consensus IgHV reads pairwise alignment to determine mutational status and read classification into rearrangements. Results: This approach led to the identification of a dominant clone IgHV in all cases (n=51). Instead, the percentage of identity calculated by HTS analysis varies in: - 15/22 borderline cases whose mutational status could be recalculated into 10 MM and 5 UM. The rest 7 remaining in borderline group. - We could identify both clones in 29 double rearrangements cases, with concordant mutational status except 2/29 undetermined cases, included in UM group regarding HTS results. Our tool led to the identification of a dominant clonotypic IgHV in all cases, and when compared the HTS sequence/mutational status for the most abundant clone with Sseq and for the IgHV status determination, 15 out of 22 (68,18%), could be reclassified. This case showed a major clone with productive rearrangement mutated by Sseq but unmutated by HTS. Conclusions: Analyze and determine the mutational status of the IgHV locus by HTS, would potentially reveal multiple rearrangements and increase the prognostic precision of IgHV mutation analysis. IgHV-HTS classification is able to precisely classify patients with borderline status or/and multiple IgHV rearrangements for which Sseq is inconclusive. In this case, it has been possible to improved prognostication for 17 out of 24 patients. This is helping us to discover the advantages of the data obtained by HTS compared with current Sseq standard technique. Samples were provided by the INCLIVA Biobank. Funded by Gilead Felowship 257/17 Disclosures Terol: Abbvie: Consultancy; Janssen: Consultancy, Research Funding; Gilead: Research Funding; Roche: Consultancy; Astra Zeneca: Consultancy.


Biology ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 1280
Author(s):  
Xinze Shuwang ◽  
Jun Sun ◽  
Yuqiu Wei ◽  
Congcong Guo

In this study, flow cytometry (FCM) and size-fractionated filtration, together with high-throughput molecular sequencing methods (SM), were used to investigate picophytoplankton. A particle separation filter and a higher-throughput sequencing method were used to evaluate the composition of a euphotic zone of picophytoplankton—especially picoeukaryotic phytoplankton—in the Western Pacific, and the results of flow cytometry, which is a classic way to detect picophytoplankton, were used as a standard to evaluate the reliability of the results of the SMs. Within a water column of 200 m, six water depths (5, 25, 50, 113 (DCM), 150, and 200 m) were established. In order to further study the particle size spectra of the picophytoplankton, size-fractionated filtration was used to separate water samples from each water depth into three particle size ranges: 0.2–0.6, 0.6–1.2, and 1.2–2 μm. A total of 36 (6 × 3 × 2) samples were obtained through PCR amplification of the 18S rRNA V4 hypervariable region and 16S rRNA, which were biased toward phytoplankton plastids, and then high-throughput sequencing was performed. The estimation of the picophytoplankton diameter relied on forward scattering (FSC) through FCM. The estimation of the vertical distribution and diameter of the picophytoplankton using the SM was consistent with the results with FCM; thus, we believe that the estimation of picophytoplankton composition with the SM has value as a reference, although the size-fractionated filtration seemed to cause some deviations. In addition to Prochlorococcus and Synechococcus, the SM was used to evaluate the composition of picoeukaryotic phytoplankton, which mainly included Prymnesiophycea (Haptophyta) (38.15%), Cryptophyceae (Cryptophyta) (22.36%), Dictyochophyceae (Chrysophyta) (12.22%), and Mamiellophyceae (Chlorophyta) (3.31%). In addition, the SM also detected Dinophyceae (Dinoflagellata) (11.69%) sequences and a small number of Bacillariophyceae (Diatom) (1.64%) sequences, which are generally considered to have large particle sizes. The results of the SM also showed that the picoeukaryotic phytoplankton were not evenly distributed in the euphotic layer, and the vertical distributions of the different picoeukaryotic phytoplankton were different. An analysis of correlations with environmental factors showed that temperature was the main environmental factor controlling the vertical distribution of picophytoplankton.


Genes ◽  
2019 ◽  
Vol 10 (7) ◽  
pp. 530 ◽  
Author(s):  
Xie ◽  
Pan ◽  
Jiang ◽  
Liu ◽  
Lu ◽  
...  

Lactobacillus is a fairly diverse genus of bacteria with more than 260 species and subspecies. Many profiling methods have been developed to carry out phylogenetic analysis of this complex and diverse genus, but limitations remain since there is still a lack of comprehensive and accurate analytical method to profile this genus at species level. To overcome these limitations, a Lactobacillus-specific primer set was developed targeting a hypervariable region in the groEL gene—a single-copy gene that has undergone rapid mutation and evolution. The results showed that this methodology could accurately perform taxonomic identification of Lactobacillus down to the species level. Its detection limit was as low as 104 colony-forming units (cfu)/mL for Lactobacillus species. The assessment of detection specificity using the Lactobacillus groEL profiling method found that Lactobacillus, Pediococcus, Weissella, and Leuconostoc genus could be distinguished, but non-Lactobacillus Genus Complex could not be detected. The groEL gene sequencing and Miseq high-throughput approach were adopted to estimate the richness and diversity of Lactobacillus species in different ecosystems. The method was tested using kurut (fermented yak milk) samples and fecal samples of human, rat, and mouse. The results indicated that Lactobacillus mucosae was the predominant gut Lactobacillus species among Chinese, and L. johnsonii accounted for the majority of lactobacilli in rat and mouse gut. Meanwhile, L. delbrueckii subsp. bulgaricus had the highest relative abundance of Lactobacillus in kurut. Thus, this groEL gene profiling method is expected to promote the application of Lactobacillus for industrial production and therapeutic purpose.


2018 ◽  
Author(s):  
Karlis Pleiko ◽  
Liga Saulite ◽  
Vadims Parfejevs ◽  
Karlis Miculis ◽  
Egils Vjaters ◽  
...  

ABSTRACTAptamers have in recent years emerged as a viable alternative to antibodies. High-throughput sequencing (HTS) has revolutionized aptamer research by increasing the number of reads from a few (using Sanger sequencing) to millions (using an HTS approach). Despite the availability and advantages of HTS compared to Sanger sequencing, there are only 50 aptamer HTS sequencing samples available on public databases. HTS data in aptamer research are primarily used to compare sequence enrichment between subsequent selection cycles. This approach does not take full advantage of HTS because the enrichment of sequences during selection can be due to inefficient negative selection when using live cells. Here, we present a differential binding cell-SELEX (systematic evolution of ligands by exponential enrichment) workflow that adapts theFASTAptamertoolbox and bioinformatics tooledgeR, which are primarily used for functional genomics, to achieve more informative metrics about the selection process. We propose a fast and practical high-throughput aptamer identification method to be used with the cell-SELEX technique to increase the aptamer selection rate against live cells. The feasibility of our approach is demonstrated by performing aptamer selection against a clear cell renal cell carcinoma (ccRCC) RCC-MF cell line using the RC-124 cell line from healthy kidney tissue for negative selection.


2016 ◽  
Vol 7 ◽  
Author(s):  
Mark W. Robinson ◽  
Joseph Hughes ◽  
Gavin S. Wilkie ◽  
Rachael Swann ◽  
Stephen T. Barclay ◽  
...  

2021 ◽  
Author(s):  
Fatimah Alhamlan ◽  
Dana Bakheet ◽  
Marie Bohol ◽  
Madain Alsanea ◽  
Basma Alahaideb ◽  
...  

Background: The need for active genomic sequencing surveillance to rapidly identify circulating SARS-CoV-2 variants of concern (VOCs) is critical. However, increased global demand has led to a shortage of commercial SARS-CoV-2 sequencing kits, and not every country has the technological capability or the funds for high-throughput sequencing platforms. Therefore, this study aimed to develop and validate a rapid, cost-efficient genome sequencing protocol that uses supplies, equipment, and methodologic expertise available in standard molecular or diagnostic laboratories to identify circulating SARS-CoV-2 variants of concern. Methods: Sets of primers flanking the SARS-CoV-2 spike gene were designed using SARS-CoV-2 genome sequences retrieved from the Global Initiative on Sharing Avian Influenza Data (GISAID) Database and synthesized in-house. Primer specificity and final sequences were verified using online prediction analyses with BLAST. The primers were validated using 282 nasopharyngeal samples collected from patients assessed as positive for SARS-CoV-2 at the diagnostic laboratory of the hospital using a Rotor-Gene PCR cycler with an Altona Diagnostics SARS-CoV-2 kit. The patient samples were subjected to RNA extraction followed by cDNA synthesis, conventional polymerase chain reaction, and Sanger sequencing. Protocol specificity was confirmed by comparing these results with SARS-CoV-2 whole genome sequencing of the same samples. Results: Sanger sequencing using the newly designed primers and next-generation whole genome sequencing of 282 patient samples indicated identical variants of concern results: 123 samples contained the alpha variant (B.1.1.7); 78, beta (B.1.351), 0, gamma (P.1), and 13, delta (B.1.617.2). Moreover, the remaining samples were non-VOC that belonged to none of these variants and had 99.97% identity with the reference genome. Only four samples had poor sequence quality by Sanger sequencing owing to a low viral count (Ct value >38). Therefore, mutation calls were >98% accurate. Conclusions: Sanger sequencing method using in-house primers is an alternative approach that can be used in facilities with existing equipment to mitigate limitations in high throughput supplies required to identify SARS-CoV-2 variants of concern during the COVID-19 pandemic. This protocol is easily adaptable for detection of emerging variants.


Blood ◽  
2012 ◽  
Vol 120 (21) ◽  
pp. 2369-2369
Author(s):  
Gareth Gerrard ◽  
Mikel Valgañón ◽  
Hui En Foong ◽  
Dalia Kasperaviciute ◽  
Michael Müller ◽  
...  

Abstract Abstract 2369 Diamond-Blackfan anaemia (DBA) is a rare autosomal dominant disorder associated with inactivating mutations in ribosomal protein (RP) genes, causing defects in erythroid progenitor and precursor cell development. Many cases are due to de novo mutations and in family cases there is often clinical heterogeneity due to variable penetrance. Mutations in RPS19 account for 25% of all DBA cases and single nucleotide variations (SNV), indels and allele-loss deletions have been found in 11 other RP genes in a further ∼50% of patients. Around 25% of patients with DBA have no identifiable mutations. Given that (with the exception of 2 cases with GATA1 mutations) all mutations in DBA characterised so far affect RP genes, it is likely that mutations in one of the 80 RP genes will be eventually identified in a significant proportion of the patients. Current screening methods are primarily based on Sanger sequencing on a per-exon/per-gene basis, with the associated time, labour and cost restrictions. We therefore aimed to evaluate high-throughput sequencing technology, including a bespoke target enrichment platform, to screen all 80 known RP genes to facilitate rapid, cost-effective identification of DBA associated mutations. DNA was extracted from peripheral blood samples that had been referred to Imperial Molecular Pathology for DBA screening from 10 individuals, including 3 family pairs: affected mother and daughter; 2 affected siblings; and another sibling pair, one of whom was unaffected/low-penetrance (no defining clinical symptoms, except for high adenine deaminase). Only one patient had a known mutation (RPS19 c.280C>T) and was included as a control. Agilent SureSelect XP was used for the target enrichment, which employed a custom designed tiled-RNA bait hybridisation solution to capture the target genes, including non-masked intronic regions and 500bp of flanking sequence. The DNA was sheared using a Covaris e220, QC was performed via QIAxcel capillary electrophoresis and the hybridisation was carried out at 65°C for 48h. Individual libraries were quantified using qPCR against the supplied standard curve and pooled proportionally. The sequencing was performed on an Illumina MiSeq, using 150bp paired-end reads and multiplexed using the supplied ScriptSeq barcodes. The sequencing reads were aligned to the build 37 reference genome using BWA software, and the variant calls made using GATK. Annovar was used for functional annotations of the variants. Protein truncating mutations were found in RP genes in 7 of the 10 samples, including the positive control and 6 of the 8 clinically confirmed DBA patient samples., All mutations were in RP genes previous described as being involved in DBA, although 3 affected novel codons: RPL5 c.G244T (stop-gain SNV; novel; mother-daughter pair); RPL5 c.166_169delACAA (frameshift); RPS10 c.C337T (stop-gain SNV); RPL11 c.472–473delAA (frameshift; novel); RPS26 c.212–213insA (frameshift; novel). Validation was by Sanger sequencing and further confirmation testing will include unaffected family members. The remaining 2 DBA patients, a brother-sister pair, showed no definable mutations in the captured regions and neither did the unaffected/low-penetrance sibling of the RPS10 patient. In summary, a rapid and cost effective methodology for screening genetic lesions associated with the causation of DBA is warranted, especially given the magnitude of attaining global coverage by conventional techniques. Whole-gene enrichment followed by multiplexed runs on a bench-top class high-throughput sequencing platform is arguably the approach of choice; although as the cost of exome and even genome sequencing continues to fall, these may well become realistic options in the coming few years. This work is ongoing, with a second group of 10 samples already sequenced and undergoing analysis, and bioinformatic refinements, especially for the detection of larger deletions, may yet yield results for the two undetected samples. These preliminary results suggest that high throughput sequencing technology with a bespoke target enrichment platform for RP genes is a feasible, efficient and relatively rapid diagnostic tool for detection of causative mutations DBA. Disclosures: No relevant conflicts of interest to declare.


2020 ◽  
Author(s):  
Richard Sharpe ◽  
Bruce Andreas Williamson-Benavides ◽  
Gerry Edwards ◽  
Amit Dhingra

Abstract Background Chloroplast genome information is critical to understanding forms of photosynthesis in the plant kingdom. During the evolutionary process, plants have developed different photosynthetic strategies that are accompanied by complementary biochemical and anatomical features. Members of family Chenopodiaceae have species with C 3 photosynthesis, and variations of C 4 photosynthesis in which photorespiration is reduced by concentrating CO 2 around Rubisco through dual coordinated functioning of dimorphic chloroplasts. Among dicots, the family has the largest number of C 4 species, and greatest structural and biochemical diversity in forms of C 4 including the canonical dual-cell Kranz anatomy, and the recently identified single cell C 4 with the presence of dimorphic chloroplasts separated by a vacuole. This is the first comparative analysis of chloroplast genomes in species representative of photosynthetic types in the family. Results Methodology with high throughput sequencing complemented with Sanger sequencing of selected loci provided high quality and complete chloroplast genomes of seven species in the family and one species in the closely related Amaranthaceae family, representing C 3 , Kranz type C 4 and single cell C 4 (SSC 4 ) photosynthesis Six of the eight chloroplast genomes are new, while two are improved versions of previously published genomes. The depth of coverage obtained using high-throughput sequencing complemented with targeted resequencing of certain loci enabled superior resolution of the border junctions, directionality and repeat region sequences. Comparison of the chloroplast genomes with previously sequenced plastid genomes revealed similar genome organization, gene order and content with a few revisions. High-quality complete chloroplast genome sequences resulted in correcting the orientation the LSC region of the published Bienertia sinuspersici chloroplast genome, identification of stop codons in the rpl23 gene in B. sinuspersici and B. cycloptera , and identifying an instance of IR expansion in the Haloxylon ammodendron inverted repeat sequence. The rare observation of a mitochondria-to-chloroplast inter-organellar gene transfer event was identified in family Chenopodiaceae. Conclusions This study reports complete chloroplast genomes from seven Chenopodiaceae and one Amaranthaceae species. The depth of coverage obtained using high-throughput sequencing complemented with targeted resequencing of certain loci enabled superior resolution of the border junctions, directionality, and repeat region sequences. Therefore, the use of high throughput and Sanger sequencing, in a hybrid method, reaffirms to be rapid, efficient, and reliable for chloroplast genome sequencing.


2020 ◽  
Author(s):  
Richard Sharpe ◽  
Bruce Andreas Williamson-Benavides ◽  
Gerry Edwards ◽  
Amit Dhingra

Abstract Background Chloroplast genome information is critical to understanding taxonomic relationships in the plant kingdom. During the evolutionary process, plants have developed different photosynthetic strategies that are accompanied by complementary biochemical and anatomical features. Members of family Chenopodiaceae have species with C3 photosynthesis and variations of C4 photosynthesis in which photorespiration is reduced by concentrating CO2 around Rubisco through dual coordinated functioning of dimorphic chloroplasts. Among dicots, the family has a large number of C4 species, and greatest structural and biochemical diversity in forms of C4 including the canonical dual-cell Kranz anatomy, and the recently identified single-cell C4 with the presence of dimorphic chloroplasts separated by a vacuole. This is the first comparative analysis of chloroplast genomes in species representative of photosynthetic types in the family. Results High quality and complete chloroplast genomes of eight species representing C3, Kranz type C4, and single-cell C4 (SSC4) photosynthesis were obtained using high throughput sequencing complemented with Sanger sequencing of selected loci. Six of the eight chloroplast genome sequences are new, while two represent corrected versions of previously published chloroplast genomes. Comparative genomic analysis with previously sequenced plastid genomes revealed a similar genome organization, gene order, and content with a few revisions. High-quality complete chloroplast genome sequences resulted in correcting the orientation of the LSC region of the published Bienertia sinuspersici chloroplast genome, identification of stop codons in the rpl23 gene in B. sinuspersici and B. cycloptera, and identifying an instance of IR expansion in the Haloxylon ammodendron inverted repeat sequence. The rare observation of a mitochondria-to-chloroplast inter-organellar gene transfer event was identified in family Chenopodiaceae. Conclusions This study reports complete chloroplast genomes from seven Chenopodiaceae and one Amaranthaceae species. The depth of coverage obtained using high-throughput sequencing complemented with targeted resequencing of certain loci enabled superior resolution of the border junctions, directionality, and repeat region sequences. Therefore, the use of high throughput and Sanger sequencing, in a hybrid method, reaffirms to be rapid, efficient, and reliable for chloroplast genome sequencing.


2021 ◽  
Vol 12 ◽  
Author(s):  
Min Hu ◽  
Fangbai Li ◽  
Jiangtao Qiao ◽  
Chaolei Yuan ◽  
Huanyun Yu ◽  
...  

Gene encoding the large subunit of As(III) oxidase (AioA), an important component of the microbial As(III) oxidation system, is a widely used biomarker to characterize As(III)-oxidizing communities in the environment. However, many studies were restricted to a few sequences generated by clone libraries and Sanger sequencing, which may have underestimated the diversity of As(III)-oxidizers in natural environments. In this study, we designed a primer pair, 1109F (5′-ATC TGG GGB AAY RAC AAY TA−3′) and 1548R (5′-TTC ATB GAS GTS AGR TTC AT−3′), targeting gene sequence encoding for the conserved molybdopterin center of the AioA protein, yielding amplicons approximately 450 bp in size that are feasible for highly parallel amplicon sequencing. By utilizing in silico analyses and the experimental construction of clone libraries using Sanger sequencing, the specificity and resolution of 1109F/1548R are approximated with two other previously published and commonly used primers, i.e., M1-2F/M3-2R and deg1F/deg1R. With the use of the 1109F/1548R primer pair, the taxonomic composition of the aioA genes was similar both according to the Sanger and next-generation sequencing (NGS) platforms. Furthermore, high-throughput amplicon sequencing using the primer pair, 1109F/1548R, successfully identified the well-known As(III)-oxidizers in paddy soils and sediments, and they also revealed the differences in the community structure and composition of As(III)-oxidizers in above two biotopes. The random forest analysis showed that the dissolved As(III) had the highest relative influence on the Chao1 index of the aioA genes. These observations demonstrate that the newly designed PCR primers enhanced the ability to detect the diversity of aioA-encoding microorganisms in environments using highly parallel short amplicon sequencing.


Sign in / Sign up

Export Citation Format

Share Document