scholarly journals Raw materials consumption and demolition waste generation of the urban building sector 2016–2050: A scenario-based material flow analysis of Vienna

2021 ◽  
Vol 288 ◽  
pp. 125566
Author(s):  
Jakob Lederer ◽  
Andreas Gassner ◽  
Johann Fellner ◽  
Ursula Mollay ◽  
Christof Schremmer
Keyword(s):  
Material Flow ◽  
Raw Materials ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Waste Generation ◽  
Building Sector ◽  
Demolition Waste

scholarly journals 3 Tackling Demolition Waste – An en route to Sustainable Development

2018 ◽  
Vol 8 (1) ◽  
pp. 8
Author(s):  
Nadia Qamar ◽  
Ayesha Alam Khurram
Keyword(s):  
Sustainable Development ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Conditions ◽  
Material Flow ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Construction And Demolition Waste ◽  
Water Tank ◽  
Demolition Waste

In Pakistan, construction and demolition waste(CDW) is generated in voluminous amount each year. CDW iswidely ill-handled and ultimately fed to landfills causing harm tothe already alarming environmental conditions. In order tosearch for the solution of this drastic matter, a study was done,which is explained in this paper. This paper presents the studydone at a demolition site near Karachi, in Sindh while thedemolition works were being carried out. At the site there wereold barracks which were being demolished. Before the demolitionworks were commenced, the site was surveyed and structuralcomponents of the barracks were counted and their dimensionswere measured. When the demolition was over, the demolishedwaste was calculated which comprised of concrete and masonryrubble, steel round bars, steel doors, steel windows, steel ceiling,steel girders, steel main gate, and plastic water tank. This studyinterpreted that construction and demolition (C&D) works wereprogressing considering the works’ deadline and the clients’requirements but the ecosystem’s ecology and the environmentalhealth were not taken into account. Recommendations are madeto handle CDW properly throughout its lifecycle. Theserecommendations aim to provide technological and logicalsolutions to grip CDW. The recommendations include wastereduction and reusing waste, life cycle assessment and costing,environmental and economic impact, material flow analysis, andadvanced computerized-tools.

scholarly journals HOW TO INCREASE CIRCULARITY IN THE SWISS ECONOMY?

Detritus ◽  
2021 ◽  
pp. 25-31
Author(s):  
Cecilia Matasci ◽  
Marcel Gauch ◽  
Heinz Boeni
Keyword(s):  
Economic System ◽  
Circular Economy ◽  
Material Flow ◽  
Raw Materials ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Material Flows ◽  
Environmental Threats ◽  
High Level ◽  
Recycled Waste

Environmental threats are triggered by the overconsumption of raw materials. It is therefore necessary to move towards a society that both reduces extraction and keeps the majority of the extracted raw materials in the socio-economic system. Circular economy is a key strategy to reach these goals. To implement it effectively, it is necessary to understand and monitor material flows and to define hotspots, i.e. materials that need to be tackled with the highest priority. This paper is aimed at determining how to increase circularity in the Swiss economy by means of a Material Flow Analysis coupled with a simplified Life Cycle Assessment. After having characterized material flows, we analyzed two types of hotspots: i) Raw materials consumed and/or disposed at high level, and ii) Raw materials whose extraction and production generates high environmental impacts. The Material Flow Analysis shows that each year 119 Mt of raw materials enter the Swiss economy. Therefrom, 15 Mt are derived from recycled waste inside the country; 67 Mt leave the system yearly; 27 Mt towards disposal. Out of the disposed materials, 56% are recycled and re-enter the socio-economic system as secondary materials. Looking at hotspots; concrete, asphalt, gravel and sand are among materials that are consumed and disposed at high level. Yet, looking at greenhouse gas emissions generated during extraction and production, metals - including the ones in electrical and electronic equipment - as well as textiles are among the categories that carry the biggest burden on the environment per unit of material.

scholarly journals The State of the Art of Material Flow Analysis Research Based on Construction and Demolition Waste Recycling and Disposal

Buildings ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 207 ◽  
Author(s):  
Dongming Guo ◽  
Lizhen Huang
Keyword(s):  
Material Flow ◽  
State Of The Art ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Waste Recycling ◽  
Construction And Demolition Waste ◽  
Waste Processing ◽  
City Development ◽  
Demolition Waste ◽  
Sustainable City

Construction and demolition waste (C&D waste) are widely recognized as the main form municipal solid waste, and its recycling and reuse are an important issue in sustainable city development. Material flow analysis (MFA) can quantify materials flows and stocks, and is a useful tool for the analysis of construction and demolition waste management. In recent years, material flow analysis has been continually researched in construction and demolition waste processing considering both single waste material and mixed wastes, and at regional, national, and global scales. Moreover, material flow analysis has had some new research extensions and new combined methods that provide dynamic, robust, and multifaceted assessments of construction and demolition waste. In this paper, we summarize and discuss the state of the art of material flow analysis research in the context of construction and demolition waste recycling and disposal. Furthermore, we also identify the current research gaps and future research directions that are expected to promote the development of MFA for construction and demolition waste processing in the field of sustainable city development.

Dynamic Material Flow Analysis of Steel Resources in China Based on Circular Economy Theory

2013 ◽  
Vol 813 ◽  
pp. 64-71 ◽  
Author(s):  
Peng Wang ◽  
Ze Yi Jiang ◽  
Xin Yi Geng ◽  
Shi Yu Hao
Keyword(s):  
Development Strategy ◽  
Circular Economy ◽  
Material Flow ◽  
Raw Materials ◽  
National Level ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Flow Characteristics ◽  
Evaluation Framework ◽  
Basic Material

The circular economy (CE) is a new development strategy for China to alleviate the contradiction between rapid economic growth and the shortage of raw materials and energy. As the basic material, steel is a key driver of the world's economy. Therefore, it is essential to set up CE indicators system to understand the mechanism of steel resources role in the circular economy. In this paper, a national level material flow evaluation framework based on CE theory is presented at the first. Then steel resources national lifetime cycle diagram is built based on dynamic Material Flow Analysis (MFA) method considering the steel lifetime circular flow characteristics. Under the guidance of this diagram, the material flow results of various stages (such as production process, fabrication & manufacturing process, in-use process, etc.) of steel lifetime cycle between 2001-2010 in China is obtained, including the end-of-life scarp amount of nine downstream industries. The results indicate that China steel resources has made gratifying achievements in improving productivity, reducing energy consumption and related pollution emission, but the degree of overall circulation remains to be improved urgently. In the end, a sketch of the future relevant policy recommendations are provided.

scholarly journals 3 Tackling Demolition Waste – An en route to Sustainable Development

2018 ◽  
Vol 1 (1) ◽  
pp. 8
Author(s):  
Nadia Qamar ◽  
Ayesha Alam Khurram
Keyword(s):  
Sustainable Development ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Conditions ◽  
Material Flow ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Construction And Demolition Waste ◽  
Water Tank ◽  
Demolition Waste

In Pakistan, construction and demolition waste(CDW) is generated in voluminous amount each year. CDW iswidely ill-handled and ultimately fed to landfills causing harm tothe already alarming environmental conditions. In order tosearch for the solution of this drastic matter, a study was done,which is explained in this paper. This paper presents the studydone at a demolition site near Karachi, in Sindh while thedemolition works were being carried out. At the site there wereold barracks which were being demolished. Before the demolitionworks were commenced, the site was surveyed and structuralcomponents of the barracks were counted and their dimensionswere measured. When the demolition was over, the demolishedwaste was calculated which comprised of concrete and masonryrubble, steel round bars, steel doors, steel windows, steel ceiling,steel girders, steel main gate, and plastic water tank. This studyinterpreted that construction and demolition (C&D) works wereprogressing considering the works’ deadline and the clients’requirements but the ecosystem’s ecology and the environmentalhealth were not taken into account. Recommendations are madeto handle CDW properly throughout its lifecycle. Theserecommendations aim to provide technological and logicalsolutions to grip CDW. The recommendations include wastereduction and reusing waste, life cycle assessment and costing,environmental and economic impact, material flow analysis, andadvanced computerized-tools.

scholarly journals The application of MFA for rural industrial symbiosis assessment

2021 ◽  
Vol 916 (1) ◽  
pp. 012024
Author(s):  
D Agustina ◽  
A D Wicaksono ◽  
C Meidiana
Keyword(s):  
Material Flow ◽  
Aluminum Industry ◽  
Raw Materials ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
High Energy ◽  
Production Equipment ◽  
Waste Utilization ◽  
Industrial Symbiosis ◽  
The Aluminum Industry

Abstract One of proposed strategies to solve current environmental challenges includes the industrial symbiosis. However, proper evaluation methods are required to measure the potential benefits of industrial symbiosis, one of those includes the material flow analysis (MFA). MFA develops a unified database and a Step-by-Step process starting from the input, process, and output process to clarify the distribution of waste and the recycling process in the aluminum industry. The aluminum industry is regarded as an energy-intensive and high-pollution industry. The development of industrial symbiosis in the aluminum industry has significantly reduced environmental pressures and facilitated green development and green industry. Home industries that process aluminum slag raw materials require high energy thereby generating high waste during the production process. The applied method includes material flow analysis (MFA). The MFA results indicated that the production elements of the aluminum slag industry consist of 11 elements ranging from raw materials, fuel, clean water, human resources, capital, production processes, production equipment, housekeeping, products produced, waste to waste utilization. Approximately 44% of the industry sold waste to other industries, 42% of the waste was reprocessed, and 14% of the aluminum industry stockpiles production was in the form of waste in open spaces. The industrial symbiosis in the aluminum industry was an open cycle, indicating that the symbiosis produces waste, which had not been fully utilized; but in fact, the waste had potential as a source of raw materials, energy, and materials in other industrial processes.

Data uncertainties in material flow analysis: Municipal solid waste management system in Maputo City, Mozambique

2016 ◽  
Vol 35 (1) ◽  
pp. 120-125 ◽  
Author(s):  
Leticia Sarmento dos Muchangos ◽  
Akihiro Tokai ◽  
Atsuko Hanashima
Keyword(s):  
Waste Management ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Material Flow ◽  
Solid Waste Management ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Municipal Solid Waste Management ◽  
Waste Generation ◽  
Maputo City

Material flow analysis can effectively trace and quantify the flows and stocks of materials such as solid wastes in urban environments. However, the integrity of material flow analysis results is compromised by data uncertainties, an occurrence that is particularly acute in low-and-middle-income study contexts. This article investigates the uncertainties in the input data and their effects in a material flow analysis study of municipal solid waste management in Maputo City, the capital of Mozambique. The analysis is based on data collected in 2007 and 2014. Initially, the uncertainties and their ranges were identified by the data classification model of Hedbrant and Sörme, followed by the application of sensitivity analysis. The average lower and upper bounds were 29% and 71%, respectively, in 2007, increasing to 41% and 96%, respectively, in 2014. This indicates higher data quality in 2007 than in 2014. Results also show that not only data are partially missing from the established flows such as waste generation to final disposal, but also that they are limited and inconsistent in emerging flows and processes such as waste generation to material recovery (hence the wider variation in the 2014 parameters). The sensitivity analysis further clarified the most influencing parameter and the degree of influence of each parameter on the waste flows and the interrelations among the parameters. The findings highlight the need for an integrated municipal solid waste management approach to avoid transferring or worsening the negative impacts among the parameters and flows.

scholarly journals Material stock and flow analysis within the agricultural building sector based on local database

2018 ◽  
Vol 3 (5) ◽  
pp. 297-320
Author(s):  
Gabriella Hancz ◽  
József Kovács
Keyword(s):  
Material Flow ◽  
Building Materials ◽  
Raw Materials ◽  
National Level ◽  
Flow Analysis ◽  
Construction Materials ◽  
Material Flow Analysis ◽  
Resource Depletion ◽  
New Development ◽  
Inventory Development

The purpose of the paper is to analyze on micro level the stream of building materials needed for raising cattle. The scope of the produced material flow chart will cover the inflow and storage of the materials. The overall objective of material flow analysis is to contribute to the data inventory development process which is needed to use these construction materials as secondary raw materials in the future. The assessment is based on a concrete new development in a Hungarian region being carried out nowadays as a development and modernization of an existing cattle raising farm. Driven by the concern of resource depletion, further research on higher level, based on larger database will be needed to verify the estimated national level results for the magnitude of growth of anthropogenic stocks.

Sign in / Sign up

Export Citation Format

Share Document