Numerical solution of fluid–structure interaction in piping systems by Glimm's method

2012 ◽  
Vol 28 ◽  
pp. 392-415 ◽  
Author(s):  
Rogerio Gomes da Rocha ◽  
Felipe Bastos de Freitas Rachid
Keyword(s):  
Numerical Solution ◽  
Fluid Structure Interaction ◽  
Fluid Structure ◽  
Structure Interaction ◽  
Piping Systems

Free Vibration and Thermal Fluid Structure Interaction Simulation of Functionally Graded Pipe by Modeling As Layered Structure

2020 ◽  
Author(s):  
Ziyi Su ◽  
Kazuaki Inaba ◽  
Amit Karmakar ◽  
Apurba Das
Keyword(s):  
Free Vibration ◽  
Layered Structure ◽  
Volume Fraction ◽  
Fluid Structure Interaction ◽  
Functionally Graded ◽  
Fluid Structure ◽  
Structure Interaction ◽  
Layered Model ◽  
Piping Systems ◽  
Complex Phenomena

Abstract Functionally graded materials (FGMs) are advanced class of composite materials which can be used as the thermal barrier to protect inner components from the outside high temperature environment. In FGMs, the volume fraction of each constituent can be tailored made across the thickness for desired applications. In this work, the simulation of FGMs in pipes is considered. Despite the wide application of pipes in machinery, those pipes would suffer from many safety problems, such as thermal stress, cavitation, fracture etc. Application of FGMs to the piping systems could lead to some new solutions accounting for safety measures and higher service life. However, the complex phenomena within the fluid structure interaction are hard to describe with the theoretical solution. The visualization of results from simulation will be helpful in understanding the distribution of kinds of physical quantities within the concerned model. For the simulation, FGMs are modeled as the layered structure in the standard finite element method (FEM) package based on FGM constituent law. The free vibration of the FG pipe is simulated and the accuracy of layered model is verified by numerical calculations. Further, based on the layered model, conjugate heat transfer simulations in a heat exchanger with FGMs are conducted.

Frequency Domain Analysis of Vibrations in Liquid-Filled Piping Systems

1999 ◽  
Author(s):  
Zongxia Jiao ◽  
Qing Hua ◽  
Kai Yu
Keyword(s):  
Frequency Domain ◽  
Transfer Matrix ◽  
Fluid Structure Interaction ◽  
Viscous Friction ◽  
Domain Analysis ◽  
Frequency Domain Analysis ◽  
Piping System ◽  
Fluid Structure ◽  
Structure Interaction ◽  
Piping Systems

Abstract In the analysis of liquid-filled piping systems there are Poisson-coupled axial stress waves in the pipe and liquid column, which are caused by the dilation of the pipe. In some conditions the influence of viscous friction that is usually frequency-dependent should not be omitted, which in fact is another kind of coupled form. It directly influences the amplitude of vibration of piping systems to some degree. The larger the viscosity of the liquid is, the greater the influence will be. Budny (1991) included the viscous friction influence in time domain analysis of fluid-structure interaction, but did not give frequency domain analysis. Lesmez (1990) gave the model analysis liquid-filled piping systems without considering friction. If the friction is not included in frequency domain analysis, the vibration amplitude will be greater than that when friction is included, especially at harmony points, cause large errors in the simulation of fluid pipe network analysis, although it may have little influence on the frequency of harmony points. The present paper will give detail solutions to the transfer matrix that represents the motion of single pipe section, which is the basis of complex fluid-structure interaction analysis. Combined with point matrices that describe specified boundary conditions, overall transfer matrix for a piping system can be assembled. Corresponding state vectors can then be evaluated to predict the piping and liquid motion. At last, a twice-coordinate transformation method is adopted in joint coupling. Consequently, the vibration analysis of spatial liquid-filled piping systems can be carried out. It is proved to be succinct, valid and versatile. This method can be extended to the simulation of the curved spatial pipeline systems.

A Qualified Method for Fluid-Structure Interaction in Piping Design

2006 ◽  
Author(s):  
Miks Hartmann
Keyword(s):  
Fluid Structure Interaction ◽  
Substantial Contribution ◽  
Structural Dynamic ◽  
Fluid Structure ◽  
Structure Interaction ◽  
Fluid Forces ◽  
Various Boundary Conditions ◽  
Coupled Calculation ◽  
Piping Systems ◽  
Hydraulic Load

In piping design hydraulic load cases and the resulting dynamic structural loads are induced and generated by strongly time dependent pressure surges and subsequent oscillations. Therefore, with liquid filled piping, the implementation of fluid-structure interaction by coupling the fluiddynamic and the structural dynamic codes gives a substantial contribution to more realistic loading results. Considering this effect, usually a load reduction due to energy losses and the phase and frequency shift from fluid to structure and vice versa is achieved. In cases of fluid structure resonance the results are more reliable and can help to develop an optimized support concept. To realize the coupled calculation of both codes they are bundled by a special user environment, where the coupling points are specified and marked. We describe the input of fluid forces at those points and the treatment of the liquid masses inside the piping, as well as the method of back-coupling the resulting structural displacements into the fluid calculation. The method was validated against measurements of load cases in power plant piping systems and experimental results for various boundary conditions. The most realistic results were obtained by combining the coupling with the application of dynamic friction in the fluid code.

Response of Water-Filled Thin-Walled Pipes to Pressure Pulses: Experiments and Analysis

1980 ◽  
Vol 102 (1) ◽  
pp. 56-61 ◽  
Author(s):  
C. M. Romander ◽  
L. E. Schwer ◽  
D. J. Cagliostro
Keyword(s):  
Pressure Pulse ◽  
Fluid Structure Interaction ◽  
Two Dimensional ◽  
Fluid Structure ◽  
Structure Interaction ◽  
Modeling Techniques ◽  
Pressure Pulses ◽  
Piping Systems ◽  
Dimensional Finite Element ◽  
Thin Walled

Experiments are performed to verify modeling techniques used in fluid-structure interaction codes that predict the response of liquid-filled piping systems to strong pressure pulses. Pressure pulses having a 150-μs rise time, a 2000-psi (13.8 MPa) magnitude, and a 3-ms duration are propagated into straight, water-filled Ni 200 pipes (3-in. (7.6-cm) O.D. 0.065-in. (0.165-cm) wall). Attenuation of the pressure pulse and the strain and deformation along the pipes are measured. The experiments are modeled in WHAM, a two-dimensional, finite-element, compressible fluid-structure interaction code. The experimental and analytical results are discussed in detail and are found to compare favorably.

Fluid transients and fluid-structure interaction in flexible liquid-filled piping

2001 ◽  
Vol 54 (5) ◽  
pp. 455-481 ◽  
Author(s):  
David C Wiggert ◽  
Arris S Tijsseling
Keyword(s):  
Fluid Structure Interaction ◽  
Mechanical Action ◽  
Fluid Structure ◽  
Structure Interaction ◽  
Piping Systems ◽  
Safety And Reliability ◽  
Fluid Transients ◽  
Excitation Mechanisms ◽  
Support Mechanisms ◽  
Numerical And Analytical Methods

Fluid-structure interaction in piping systems (FSI) consists of the transfer of momentum and forces between piping and the contained liquid during unsteady flow. Excitation mechanisms may be caused by rapid changes in flow and pressure or may be initiated by mechanical action of the piping. The interaction is manifested in pipe vibration and perturbations in velocity and pressure of the liquid. The resulting loads imparted on the piping are transferred to the support mechanisms such as hangers, thrust blocks, etc. The phenomenon has recently received increased attention because of safety and reliability concerns in power generation stations, environmental issues in pipeline delivery systems, and questions related to stringent industrial piping design performance guidelines. Furthermore, numerical advances have allowed practitioners to revisit the manner in which the interaction between piping and contained liquid is modeled, resulting in improved techniques that are now readily available to predict FSI. This review attempts to succinctly summarize the essential mechanisms that cause FSI, and present relevant data that describe the phenomenon. In addition, the various numerical and analytical methods that have been developed to successfully predict FSI will be described. Several earlier reviews regarding FSI in piping have been published; this review is intended to update the reader on developments that have taken place over the last approximately ten years, and to enhance the understanding of various aspects of FSI. There are 123 references cited in this review article.

Fluid-Structure Interaction With S-TRAC and KWUROHR Due to Pressure Waves

2003 ◽  
Author(s):  
Ulrich Neumann
Keyword(s):  
Fluid Structure Interaction ◽  
Dynamic Program ◽  
Pressure Waves ◽  
Structural Dynamic ◽  
Fluid Structure ◽  
Structure Interaction ◽  
Fluid Forces ◽  
Piping Systems

In the last years we have spent a lot of time to improve our programs and procedures, especially on the field of fluiddynamic investigations in piping systems. To get the best design of piping layout the results of fluiddynamic and structural calculations should be realistic as far as possible. In this connection a very important effect is the fluid-structure interaction (FSI) which we have implemented in S-TRAC in connection with our structural dynamic program KWUROHR. On the basis of different calculations we will show the influence of the coupling on the fluid forces and the piping layout.

Godunov’s Method for Simulatinons of Fluid-Structure Interaction in Piping Systems

2008 ◽  
Vol 130 (3) ◽  
Author(s):  
Janez Gale ◽  
Iztok Tiselj
Keyword(s):  
Mathematical Model ◽  
Numerical Method ◽  
Constant Coefficient ◽  
Single Phase ◽  
Fluid Structure Interaction ◽  
Fluid Structure ◽  
Structure Interaction ◽  
Godunov’S Method ◽  
Piping Systems ◽  
Godunov′S Method

Constant coefficient one-dimensional linear hyperbolic systems of partial differential equations (PDEs) are often used for description of fluid-structure interaction (FSI) phenomena during transient conditions in piping systems. In the past, these systems of equations have been numerically solved with method of characteristics (MOCs). The MOC method is actually the most efficient and accurate method for description of the single-phase transient in the cold liquid where the constant coefficient mathematical model describes phenomenon with sufficient accuracy. In energy production systems where hot pressurized liquid is used for heat transfer between the heat source and the steam generator, more complex and nonlinear mathematical models are needed to describe transient flow and these models cannot be solved with MOC method because the models are not constant. In addition, the MOC method can be used for pipes having discontinuities like elbows, geometrical changes, material properties changes, etc., but only with some extra numerical modeling. An interesting alternative is explicit characteristic upwind numerical method, known as Godunov’s method that is frequently used for nonlinear systems or systems where properties change with position. In the present study, applicability of the Godunov’s method for the FSI analyses is tested with eight first order PDEs mathematical model. The conventional linear mathematical model is improved with convective term that makes the system nonlinear and additional terms that enable simulations of the FSI in arbitrarily shaped piping systems located in a plane. Two PDEs describe pressure waves in the single-phase fluid and six PDEs describe axial, lateral, and rotational stress waves in the pipe. The applied system of equations has stiff source terms. This numerical problem is solved introducing implicit iterations. The proposed model is verified with a rod impact experiment that is carried out on single-elbow pipe hanging on wires. Godunov’s method is found as a very promising numerical method for simulations of the FSI problems.

Sign in / Sign up

Export Citation Format

Share Document