To improve the biocompatibility and bioactivity of NiTi shape memory alloy (SMA), apatite/collagen composite coatings were fabricated on the surface of NiTi SMA at room temperature using the electrochemical deposition technique. Spherical apatite particles and fibrous collagen that formed the composite coating were visible under scanning electron microscope (SEM). The Ca/P ratio of the apatite component in the coating, as determined by energy dispersive X-ray spectroscopy (EDX), was about 1.38 which is slightly higher than that of octocalcium phosphate (OCP). X-ray diffraction result showed that the apatite was amorphous, which was due to the low temperature (i.e., room temperature) deposition process. The structure of the composite coatings was further characterized using Fourier transform infrared reflection spectroscopy (FTIR). It was also found that, compared to bare NiTi SMA samples, the wettability of as-deposited samples was increased because of the formation of the composite coating.
Effect of ultrasonic waves on the electrochemical deposition of calcium phosphate/nano-sized silica composite coating