Optimal load factors for earthquake-resistant design of buildings located at different types of soils

2021 ◽  
Vol 34 ◽  
pp. 102026
Author(s):  
Miguel A. Orellana ◽  
Sonia E. Ruiz ◽  
Juan Bojórquez ◽  
Alfredo Reyes-Salazar ◽  
Edén Bojórquez
Keyword(s):  
Earthquake Resistant Design ◽  
Load Factors ◽  
Optimal Load ◽  
Earthquake Resistant ◽  
Different Types

scholarly journals Seismic Response of Large span slab in Horizontal Setback Building

2021 ◽  
Vol 9 (11) ◽  
pp. 1353-1360
Author(s):  
Manish Kumar Pandey
Keyword(s):  
Structural Elements ◽  
Commercial Building ◽  
Flat Slab ◽  
Large Span ◽  
Earthquake Resistant Design ◽  
Earthquake Resistant ◽  
Different Types ◽  
Waffle Slab ◽  
Earthquake Zone ◽  
Structural Engineers

Abstract: The demand for multi-storey buildings is increasing day by day. Residential plus commercial building is mainly used for wide span needs. Wide span required for Flat slab, Waffle slab and ribbed slab stands An excellent option for architects when larger openings in a building need to be covered with as few columns as possible. The use of different types of plates is developing as a new trend and is becoming a major challenge for structural engineers. Therefore, it is necessary to study about its structural behavior. The project is carried out under earthquake zone III under the earthquake analysis of G+9 storey building. For this study, four different types of large span slab structure are modelled in C-shape (Horizontal Setback Building) having 10-stories i.e. G+9 storied buildings with 3.50 meters height for each story is modelled and analysed. The plan area of all four buildings is same i.e. 2859 square meters (49.50 m x 82.50 m) each. These buildings were designed in compliance with the Indian Code of Practices for earthquake resistant design of buildings. Base of the building were fixed. The square sections are used for structural elements. The height of the buildings is considered constant throughout the structure. The buildings are modelled using ETABSvr.2016. Keywords: large span slab, ETABSvr.2016, Horizontal Setback Building, Flat slab, Waffle slab and ribbed slab

Storage Tanks Under Earthquake Loading

1990 ◽  
Vol 43 (11) ◽  
pp. 261-282 ◽  
Author(s):  
Franz G. Rammerstorfer ◽  
Knut Scharf ◽  
Franz D. Fisher
Keyword(s):  
Earthquake Engineering ◽  
Numerical Models ◽  
Vertical Axis ◽  
Storage Tanks ◽  
Strongly Nonlinear ◽  
Liquid Storage ◽  
Earthquake Resistant Design ◽  
Earthquake Resistant ◽  
Different Types ◽  
Interaction Problem

This is a state-of-the-art review of various treatments of earthquake loaded liquid filled shells by the methods of earthquake engineering, fluid dynamics, structural and soil dynamics, as well as the theory of stability and computational mechanics. Different types of tanks and different possibilities of tank failure will be discussed. We will emphasize cylindrical above-ground liquid storage tanks with a vertical axis. But many of the treatments are also valid for other tank configurations. For the calculation of the dynamically activated pressure due to an earthquake a fluid-structure-soil interaction problem must be solved. The review will describe the methods, proposed by different authors, to solve this interaction problem. To study the dynamic behavior of liquid storage tanks, one must distinguish between anchored and unanchored tanks. In the case of an anchored tank, the tank bottom edge is fixed to the foundation. If the tank is unanchored, partial lifting of the tank’s bottom may occur, and a strongly nonlinear problem has to be solved. We will compare the various analytical and numerical models applicable to this problem, in combination with experimental data. An essential aim of this review is to give a summary of methods applicable as tools for an earthquake resistant design, which can be used by an engineer engaged in the construction of liquid storage tanks.

scholarly journals FUNDAMENTAL STUDY ON EARTHQUAKE RESISTANT DESIGN OF FILL-TYPE DAMS

1983 ◽  
Vol 1983 (339) ◽  
pp. 127-136 ◽  
Author(s):  
Yoshio OHNE ◽  
Hidehiro TATEBE ◽  
Kunitomo NARITA ◽  
Tetsuo OKUMURA
Keyword(s):  
Fundamental Study ◽  
Earthquake Resistant Design ◽  
Earthquake Resistant

A NEURAL NETWORK-WAVELET MODEL FOR GENERATING ARTIFICIAL ACCELEROGRAMS

2004 ◽  
Vol 02 (03) ◽  
pp. 217-235 ◽  
Author(s):  
GENE F. SIRCA ◽  
HOJJAT ADELI
Keyword(s):  
Neural Network ◽  
Geographic Location ◽  
Training Data ◽  
Wavelet Network ◽  
Design Spectrum ◽  
Earthquake Resistant Design ◽  
Earthquake Resistant ◽  
Structural Configurations ◽  
Earthquake Accelerograms ◽  
Artificial Accelerograms

In earthquake-resistant design of structures, for certain structural configurations and conditions, it is necessary to use accelerograms for dynamic analysis. Accelerograms are also needed to simulate the effects of earthquakes on a building structure in the laboratory. A new method of generating artificial earthquake accelerograms is presented through adroit integration of neural networks and wavelets. A counterpropagation (CPN) neural network model is developed for generating artificial accelerograms from any given design spectrum such as the International Building Code (IBC) design spectrum. Using the IBC design spectrum as network input means an accelerogram may be generated for any geographic location regardless of whether earthquake records exist for that particular location or not. In order to improve the efficiency of the model, the CPN network is modified with the addition of the wavelet transform as a data compression tool to create a new CPN-wavelet network. The proposed CPN-wavelet model is trained using 20 sets of accelerograms and tested with additional five sets of accelerograms available from the U.S. Geological Survey. Given the limited set of training data, the result is quite remarkable.

Earthquake Resistant Design of Intake-Outlet Towers

1975 ◽  
Vol 101 (7) ◽  
pp. 1349-1366
Author(s):  
Anil K. Chopra ◽  
C-Y. Liaw
Keyword(s):  
Earthquake Resistant Design ◽  
Earthquake Resistant

Study of power transformer loading in rural power supply systems

2021 ◽  
Vol 13 (4) ◽  
pp. 282-289
Author(s):  
I. V. Naumov ◽  
D. N. Karamov ◽  
A. N. Tretyakov ◽  
M. A. Yakupova ◽  
E. S. Fedorinovа
Keyword(s):  
Energy Efficiency ◽  
Power Supply ◽  
Rural Areas ◽  
Power Transformer ◽  
Electric Energy ◽  
Power Transformers ◽  
Electric Networks ◽  
Load Factors ◽  
Optimal Load ◽  
Supply Systems

The purpose of this study is to study the effect of loading power transformers (PT) in their continuous use on their energy efficiency on a real-life example of existing rural electric networks. It is noted that the vast majority of PT in rural areas have a very low load factor, which leads to an increase in specific losses of electric energy when this is transmitted to various consumers. It is planned to optimize the existing synchronized power supply systems in rural areas by creating new power supply projects in such a way as to integrate existing power sources and ensure the most efficient loading of power transformers for the subsequent transfer of these systems to isolated ones that receive power from distributed generation facilities. As an example, we use data from an electric grid company on loading power transformers in one of the districts of the Irkutsk region. Issues related to the determination of electric energy losses in rural PT at different numerical values of their load factors are considered. A computing device was developed using modern programming tools in the MATLAB system, which has been used to calculate and plot the dependence of power losses in transformers of various capacities on the actual and recommended load factors, as well as the dependence of specific losses during the transit of 1 kVA of power through a power transformer at the actual, recommended and optimal load factors. The analysis of specific losses of electric energy at the actual, recommended and optimal load factors of PT is made. Based on the analysis, the intervals of optimal load factors for different rated power of PT of rural distribution electric networks are proposed. It is noted that to increase the energy efficiency of PT, it is necessary to reduce idling losses by increasing the load of these transformers, which can be achieved by reducing the number of transformers while changing the configuration of 0.38 kV distribution networks.

Proposal of orientation-independent measure of intensity for earthquake-resistant design

2021 ◽  
pp. 875529302110382
Author(s):  
Alan Poulos ◽  
Eduardo Miranda
Keyword(s):  
United States ◽  
Ground Motion ◽  
The United States ◽  
Design Codes ◽  
Intensity Measure ◽  
Independent Measure ◽  
Earthquake Resistant Design ◽  
Earthquake Resistant ◽  
Ground Motion Records ◽  
Structural Engineers

A new measure of ground motion intensity in the horizontal direction is proposed. Similarly to other recently proposed measures of intensity, the proposed intensity measure is also independent of the as-installed orientation of horizontal sensors at recording stations. This new measure of horizontal intensity, referred to as MaxRotD50, is defined using the maximum 5%-damped response spectral ordinate of two orthogonal horizontal directions and then computing the 50th percentile for all non-redundant rotation angles, that is, the median of the set of spectral ordinates in a range of 90°. This proposed measure of intensity is always between the median and maximum spectral ordinate for all non-redundant orientations, commonly referred to as RotD50 and RotD100, respectively. A set of 5065 ground motion records is used to show that MaxRotD50 is, on average, approximately 13%–16% higher than Rot50 and 6% lower than RotD100. The new measure of intensity is particularly well suited for earthquake-resistant design where a major concern for structural engineers is the probability that the design ground motion intensity is exceeded in at least one of the two principal horizontal components of the structure, which for most structures are orthogonal to each other. Currently, design codes in the United States are based on RotD100, and hence using MaxRotD50 for structures with two orthogonal principal horizontal components would result in a reduction of the ground motion intensities used for design purposes.

Sign in / Sign up

Export Citation Format

Share Document