Hollow Mn/Co-LDH produced by in-situ etching-growth of MOF: Nanoreactant for steady chemical immobilization of antimony

2021 ◽  
Author(s):  
Nianyi Xie ◽  
Xinyue Zhang ◽  
Ying Guo ◽  
Rongxiu Guo ◽  
Yao Wang ◽  
...  
Keyword(s):  
Chemical Immobilization

scholarly journals Transformation of Pb, Cd, and Zn Minerals Using Phosphates

Minerals ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 342 ◽  
Author(s):  
Magdalena Andrunik ◽  
Magdalena Wołowiec ◽  
Daniel Wojnarski ◽  
Sylwia Zelek-Pogudz ◽  
Tomasz Bajda
Keyword(s):  
Sequential Extraction ◽  
Contaminated Soils ◽  
Heavy Metal Contamination ◽  
Cost Effective ◽  
X Ray Diffraction ◽  
Chemical Immobilization ◽  
Crystal Forms ◽  
Dissolved Carbon ◽  
Three Samples

Heavy metal contamination in soils has become one of the most critical environmental issues. The most efficient in-situ remediation technique is chemical immobilization that uses cost-effective soil amendments such as phosphate compounds to decrease Pb, Cd and Zn accessibility in the contaminated soils. The present study examined the effectiveness of KH2PO4 in immobilizing Pb, Cd and Zn in three samples of contaminated soils collected from ZGH “Bolesław” (Mining and Smelting Plant “Bolesław”). Effectiveness was evaluated using the following methods: a toxicity characteristic leaching procedure (TCLP)-based experiment, sequential extraction, X-ray diffraction analyses (XRD), and scanning electron microscopy–energy dispersive spectroscopy (SEM–EDS). The most efficient percentage reduction of total leachable metal concentration assessed by TCLP was observed for lead (50%–80%), and the least reduction was observed for zinc (1%–17%). The most effective immobilization of stable compounds assessed by sequential extraction was noted for lead, while the weakest immobilization was noted for cadmium. New insoluble mineral phases were identified by SEM-EDS analysis. Cd, Zn, and Pb formed new stable mineral substances with phosphates. The predominant crystal forms were dripstones and groups of needles, which were easily formed by dissolved carbon rock surfaces containing zinc ions. The alkaline nature of the soil and a large number of carbonates mainly influenced the formation of new structures.

scholarly journals Rational Design of Porous N-Ti3C2 MXene@CNT Microspheres for High Cycling Stability in Li–S Battery

2019 ◽  
Vol 12 (1) ◽  
Author(s):  
Jianli Wang ◽  
Zhao Zhang ◽  
Xufeng Yan ◽  
Shunlong Zhang ◽  
Zihao Wu ◽  
...  
Keyword(s):  
Rational Design ◽  
Specific Capacity ◽  
High Capacity ◽  
Cycling Stability ◽  
Chemical Immobilization ◽  
Carbon And Nitrogen ◽  
N Doping ◽  
Sulfur Host ◽  
Fading Rate

Abstract Herein, N-Ti3C2@CNT microspheres are successfully synthesized by the simple spray drying method. In the preparation process, HCl-treated melamine (HTM) is selected as the sources of carbon and nitrogen. It not only realizes in situ growth of CNTs on the surface of MXene nanosheets with the catalysis of Ni, but also introduces efficient N-doping in both MXene and CNTs. Within the microsphere, MXene nanosheets interconnect with CNTs to form porous and conductive network. In addition, N-doped MXene and CNTs can provide strong chemical immobilization for polysulfides and effectively entrap them within the porous microspheres. Above-mentioned merits enable N-Ti3C2@CNT microspheres to be ideal sulfur host. When used in lithium–sulfur (Li–S) battery, the N-Ti3C2@CNT microspheres/S cathode delivers initial specific capacity of 927 mAh g−1 at 1 C and retains high capacity of 775 mAh g−1 after 1000 cycles with extremely low fading rate (FR) of 0.016% per cycle. Furthermore, the cathode still shows high cycling stability at high C-rate of 4 C (capacity of 647 mAh g−1 after 650 cycles, FR 0.027%) and high sulfur loading of 3 and 6 mg cm−2 for Li–S batteries.

Rendez vous with Saturn's rings

1984 ◽  
Vol 75 ◽  
pp. 743-759 ◽  
Author(s):  
Kerry T. Nock
Keyword(s):  
Solar Energy ◽  
Electric Propulsion ◽  
Power Source ◽  
Propulsion System ◽  
Low Thrust ◽  
Ring Plane ◽  
The Earth ◽  
Total Impulse ◽  
Saturn's Rings

ABSTRACTA mission to rendezvous with the rings of Saturn is studied with regard to science rationale and instrumentation and engineering feasibility and design. Future detailedin situexploration of the rings of Saturn will require spacecraft systems with enormous propulsive capability. NASA is currently studying the critical technologies for just such a system, called Nuclear Electric Propulsion (NEP). Electric propulsion is the only technology which can effectively provide the required total impulse for this demanding mission. Furthermore, the power source must be nuclear because the solar energy reaching Saturn is only 1% of that at the Earth. An important aspect of this mission is the ability of the low thrust propulsion system to continuously boost the spacecraft above the ring plane as it spirals in toward Saturn, thus enabling scientific measurements of ring particles from only a few kilometers.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Structural Studies on Mitotic Spindle Fibres

1978 ◽  
Vol 36 (3) ◽  
pp. 615-626
Author(s):  
J.R. Mcintosh
Keyword(s):  
Chemical Composition ◽  
Mitotic Spindle ◽  
Structural Studies ◽  
Mitotic Apparatus ◽  
Chemical Studies ◽  
Medical Interest ◽  
Spindle Fibres

The mitotic apparatus is a structure of obvious biological and medical interest, but it has proved to be a difficult cellular machine to understand. The chemical composition of the spindle is only slightly elucidated, largely because of the difficulties in preparing useful isolates of the structure. Chemical studies of the mitotic spindle have been reviewed elsewhere (Mcintosh, 1977), and will not be discussed further here. One would think that structural studies on the mitotic apparatus (MA) in situ would be straightforward, but even with this approach there is some disagreement in the results obtained with various methods and by different investigators. In this paper I will review briefly the approaches which have been used in structural studies of the MA, pointing out the strengths and problems of each approach. I will summarize the principal findings of the different methods, and identify what seem to be fruitful avenues for further work.

Sign in / Sign up

Export Citation Format

Share Document