Effect of tube shape on thermo-fluid performance of a winglet supported fin-and-tube heat exchanger having staggered tubes

Author(s):  
Shailesh Kumar Sarangi ◽  
Dipti Prasad Mishra
2020 ◽  
Vol 14 (2) ◽  
pp. 6709-6718
Author(s):  
Djamel Sahel ◽  
Houari Ameur ◽  
Mustapha Mellal

A numerical study is carried out to test the effect of tube shape on heat transfer and fluid flow in a finned tube heat exchanger. The effects of different shapes (circular, flat, elliptical and oval in both orientations: left and right) are analyzed. The simulations are carried out for two-dimensional and external flow of an incompressible fluid with Reynolds numbers varying between 3000 and 20000. The results obtained indicate that the shape of the tube directly affects the thermal and dynamic behaviors of a fin and tube heat exchanger. Where the circular tube ensures higher heat transfer coefficient of about 18% than the flat tube, and it generate a moderate pressure drop of about 10% in the same conditions. Also, some reliable empirical correlations are proposed to predict the Nusselt number and the friction factor.


Author(s):  
Yousef Alhendal ◽  
Abdalla Gomaa ◽  
Mahmoud Abdelmagied

Abstract The thermofluid characteristics of Al2O3–water nanofluid in the annulus of double-helical coiled tubes were experimentally and numerically carried out. The purpose was to investigate the effect of combined enhancement techniques of nanofluid and helicoid tube shape on the performance of a double tube heat exchanger. The effects of concentration of nanoparticles, Reynolds number, coil curvature ratio, and flow arrangement through the annulus of double-helical coiled tube were the main points of interest. Three coiled tube heat exchangers were manufactured and experimentally tested to study the design parameters on the performance of such a heat exchanger. A three-dimensional numerical computational fluid dynamic (CFD) model was developed to get additional insights on the thermal performance of double helically coiled tubes with nanofluid on a level of details not always available in experiments. It was found that the Al2O3–water nanofluid achieved an enhancement by 32% on the overall heat transfer coefficient. The heat exchanger effectiveness, heat transfer per unit pumping power, and the Nusselt number were also presented for different design parameters.


Author(s):  
Leonardo Cavalheiro Martinez ◽  
Leonardo Cavalheiro Martinez ◽  
Viviana Mariani ◽  
Marcos Batistella Lopes

2018 ◽  
Vol 6 (3) ◽  
pp. 1-12
Author(s):  
Kamil Abdul Hussien

Abstract-The present work investigates the enhancement of heat transfer by using different number of circular fins (8, 10, 12, 16, and 20) in double tube counter flow heat exchanger experimentally. The fins are made of copper with dimensions 66 mm OD, 22 mm ID and 1 mm thickness. Each fin has three of 14 mm diameter perforations located at 120o from each to another. The fins are fixed on a straight smooth copper tube of 1 m length, 19.9 mm ID and 22.2 mm OD. The tube is inserted inside the insulated PVC tube of 100 mm ID. The cold water is pumped around the finned copper tube, inside the PVC, at mass flow rates range (0.01019 - 0.0219) kg/s. The Reynold's number of hot water ranges (640 - 1921). The experiment results are obtained using six double tube heat exchanger (1 smooth tube and the other 5 are finned one). The results, illustrated that the heat transfer coefficient proportionally with the number of fin. The results also showed that the enhancement ratio of heat transfer for finned tube is higher than for smooth tube with (9.2, 10.2, 11.1, 12.1 13.1) times for number of fins (8, 10, 12, 16 and 20) respectively.


Sign in / Sign up

Export Citation Format

Share Document