Investigation of effects of inverter frequency changes on the specific energy consumption of pipe threading using response surface methodology

Measurement ◽  
2020 ◽  
Vol 152 ◽  
pp. 107296
Author(s):  
Burak Ozturk
Keyword(s):  
Response Surface Methodology ◽  
Energy Consumption ◽  
Response Surface ◽  
Specific Energy ◽  
Specific Energy Consumption ◽  
Frequency Changes

Optimization of Pistachio Nut Drying in a Fluidized Bed Dryer with Microwave Pretreatment Applying Response Surface Methodology

2017 ◽  
Vol 12 (3) ◽  
Author(s):  
Reza Amiri Chayjan ◽  
Mohammad Kaveh ◽  
Nesa Dibagar ◽  
Moein Zarrin Nejad
Keyword(s):  
Response Surface Methodology ◽  
Energy Consumption ◽  
Fluidized Bed ◽  
Air Temperature ◽  
Specific Energy ◽  
Color Change ◽  
Specific Energy Consumption ◽  
Air Velocity ◽  
Fluidized Bed Dryer ◽  
Total Color Change

Abstract Thin-layer drying kinetics of pistachio nuts were examined experimentally as a function of drying conditions in a fluidized bed dryer with microwave pretreatment. Four drying specifications of diffusivity, shrinkage, specific energy consumption and total color change were calculated and the effects of parameters were studied. Numerous experimentations were conducted at three levels of air temperature (40, 55, 70 °C), air velocity (1.2, 2.93, 4.01 m/s), and microwave power (270, 450, 630 W). The variation ranges of diffusivity, shrinkage, energy consumption and color change were recorded from 5.01×10–10 to 5.07×10–9 m2/s, from 26.95 % to 13.13 %, from 1.04 to 9.23 kWh and from 10.44 to 17.17, respectively. According to response surface methodology, optimum condition of drying process occurred at microwave power of 630, air temperature of 70 ˚C, and air velocity of 1.2 m/s. In this optimum point, the values of diffusivity, shrinkage, specific energy consumption and total color change were 4.865×10–9, 14.22 %, 2.164 kWh and 12.312, respectively.

Multiobjective Optimization of an Electroxidation Process of Biologically Pre-Treated Landifill Leachate by Response Surface Methodology and Desirability Function Approach

2012 ◽  
Vol 15 (2) ◽  
Author(s):  
G. Del Moro ◽  
E. Barca ◽  
C. Di Iaconi ◽  
F. Palmisano ◽  
G. Mascolo
Keyword(s):  
Response Surface Methodology ◽  
Energy Consumption ◽  
Response Surface ◽  
Desirability Function ◽  
Specific Energy Consumption ◽  
Coefficient Of Determination ◽  
Residual Chlorine ◽  
Leachate Treatment ◽  
Two Stages ◽  
Desirability Function Approach

AbstractThe optimization of the electrochemical step in a combined (biological and electro-oxidative) landfill leachate treatment was performed using a two stages approach, response surface methodology coupled with the desirability function. Four constraints were imposed, namely the discharge limit for COD (i.e. 160 mg / L), the maximization of color removal, the minimization of both residual chlorine and specific energy consumption. Each variable was modeled employing a second-order regression model. Analysis of variance (ANOVA) showed coefficient of determination (R

Determination of grinding parameters of fenugreek seed

1970 ◽  
Vol 26 (1) ◽  
pp. 16 ◽  
Author(s):  
S Balasubramanian ◽  
Rajkumar Rajkumar ◽  
K K Singh
Keyword(s):  
Particle Size ◽  
Energy Consumption ◽  
Moisture Content ◽  
Specific Energy ◽  
Feed Rate ◽  
Average Particle Size ◽  
Specific Energy Consumption ◽  
Average Particle ◽  
Fenugreek Seeds ◽  
Fenugreek Seed

Experiment to identify ambient grinding conditions and energy consumed was conducted for fenugreek. Fenugreek seeds at three moisture content (5.1%, 11.5% and 17.3%, d.b.) were ground using a micro pulverizer hammer mill with different grinding screen openings (0.5, 1.0 and 1.5 mm) and feed rate (8, 16 and 24 kg h-1) at 3000 rpm. Physical properties of fenugreek seeds were also determined. Specific energy consumptions were found to decrease from 204.67 to 23.09 kJ kg-1 for increasing levels of feed rate and grinder screen openings. On the other hand specific energy consumption increased with increasing moisture content. The highest specific energy consumption was recorded for 17.3% moisture content and 8 kg h-1 feed rate with 0.5 mm screen opening. Average particle size decreased from 1.06 to 0.39 mm with increase of moisture content and grinder screen opening. It has been observed that the average particle size was minimum at 0.5 mm screen opening and 8 kg h-1 feed rate at lower moisture content. Bond’s work index and Kick’s constant were found to increase from 8.97 to 950.92 kWh kg-1 and 0.932 to 78.851 kWh kg-1 with the increase of moisture content, feed rate and grinder screen opening, respectively. Size reduction ratio and grinding effectiveness of fenugreek seed were found to decrease from 4.11 to 1.61 and 0.0118 to 0.0018 with the increase of moisture content, feed rate and grinder screen opening, respectively. The loose and compact bulk densities varied from 219.2 to 719.4 kg m-3 and 137.3 to 736.2 kg m-3, respectively.  

scholarly journals Bibliometric Analysis of Specific Energy Consumption (SEC) in Machining Operations: A Sustainable Response

2021 ◽  
Vol 13 (10) ◽  
pp. 5617
Author(s):  
Raman Kumar ◽  
Sehijpal Singh ◽  
Ardamanbir Singh Sidhu ◽  
Catalin I. Pruncu
Keyword(s):  
Energy Consumption ◽  
Bibliometric Analysis ◽  
Specific Energy ◽  
Specific Energy Consumption ◽  
Primary Data ◽  
Data Content ◽  
Author Keywords ◽  
Link Strength ◽  
Inclusive Analysis ◽  
Machining Operations

This paper’s persistence is to make an inclusive analysis of 268 documents about specific energy consumption (SEC) in machining operations from 2001 to 2020 in the Scopus database. A systematic approach collects information on SEC documents’ primary data; their types, publications, citations, and predictions are presented. The VOSviewer 1.1.16 and Biblioshiny 2.0 software are used for visualization analysis to show the progress standing of SEC publications. The selection criteria of documents are set for citation analysis. The ranks are assigned to the most prolific and dominant authors, sources, articles, countries, and organizations based on the total citations, number of documents, average total citation, and total link strength. The author-keywords, index-keywords, and text data content analysis has been conducted to find the hotspots and progress trend in SEC in machining operations. The most prolific and dominant article, source, author, organization, and country are Anderson et al. “Laser-assisted machining of Inconel 718 with an economic analysis”, the Int J Mach Tools Manuf, Shin Y.C., form Purdue University Singapore, and United States, respectively, based on total citations as per defined criteria. The author keywords “specific cutting energy” and “surface roughness” dominate the machining operations SEC. SEC’s implication in machining operations review and bibliometric analysis is to deliver an inclusive perception for the scholars working in this field. It is the primary paper that utilizes bibliometric research to analyze the SEC in machining operations publications expansively. It is valuable for scholars to grasp the hotspots in this field in time and help the researchers in the SEC exploration arena rapidly comprehend the expansion status and trend.

Sign in / Sign up

Export Citation Format

Share Document