Real-time trajectory tracking control of a parallel robot with flexible links

2021 ◽  
Vol 158 ◽  
pp. 104220
Author(s):  
Merlin Morlock ◽  
Niklas Meyer ◽  
Marc-André Pick ◽  
Robert Seifried
Machines ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 105
Author(s):  
Zhenzhong Chu ◽  
Da Wang ◽  
Fei Meng

An adaptive control algorithm based on the RBF neural network (RBFNN) and nonlinear model predictive control (NMPC) is discussed for underwater vehicle trajectory tracking control. Firstly, in the off-line phase, the improved adaptive Levenberg–Marquardt-error surface compensation (IALM-ESC) algorithm is used to establish the RBFNN prediction model. In the real-time control phase, using the characteristic that the system output will change with the external environment interference, the network parameters are adjusted by using the error between the system output and the network prediction output to adapt to the complex and uncertain working environment. This provides an accurate and real-time prediction model for model predictive control (MPC). For optimization, an improved adaptive gray wolf optimization (AGWO) algorithm is proposed to obtain the trajectory tracking control law. Finally, the tracking control performance of the proposed algorithm is verified by simulation. The simulation results show that the proposed RBF-NMPC can not only achieve the same level of real-time performance as the linear model predictive control (LMPC) but also has a superior anti-interference ability. Compared with LMPC, the tracking performance of RBF-NMPC is improved by at least 43% and 25% in the case of no interference and interference, respectively.


2015 ◽  
Vol 799-800 ◽  
pp. 1069-1073
Author(s):  
Hao Tian ◽  
Yue Qing Yu

Trajectory tracking control of compliant parallel robot is presented. According to the characteristics of compliant joint, the system model is derived and the dynamic equation is obtained based on the Lagrange method. Radial Basis Function (RBF) neural network control is designed to globally approximate the model uncertainties. Further, an itemized approximate RBF control method is proposed for higher identify precision. The trajectory tracking abilities of two control strategies are compared through simulation.


Robotica ◽  
2016 ◽  
Vol 35 (10) ◽  
pp. 2036-2055 ◽  
Author(s):  
Ahmet Dumlu ◽  
Köksal Erentürk ◽  
Alirıza Kaleli ◽  
Kağan Koray Ayten

SUMMARYIn this paper, design, analysis and real-time trajectory tracking control of a 6-degree of freedom revolute spherical-spherical type parallel manipulator, actuated by six hybrid stepper motors, has been studied. Two different control approaches have been used to improve the trajectory tracking performance of the designed manipulator. The first approach considered a single input-single output (SISO) linear quadratic regulator (LQR) for trajectory tracking control of the manipulator. Another controller type based on a nonlinear sliding mode controller method has been utilized to take decoupled dynamic approximation model of the manipulator into account and to improve tracking performance of the manipulator. Real-time experimental results for the two different control techniques have been verified. Finally, according to the results, the nonlinear sliding mode controller method has improved the tracking performance of the designed manipulator.


Sign in / Sign up

Export Citation Format

Share Document