Osmotic power production from salinity gradient resource by pressure retarded osmosis: Effects of operating conditions and reverse solute diffusion

2012 ◽  
Vol 401-402 ◽  
pp. 262-273 ◽  
Author(s):  
Qianhong She ◽  
Xue Jin ◽  
Chuyang Y. Tang
Membranes ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 556
Author(s):  
Elham Abbasi-Garravand ◽  
Catherine N. Mulligan

A membrane-based technique for production of pressure-retarded osmosis (PRO) is salinity gradient energy. This sustainable energy is formed by combining salt and fresh waters. The membrane of the PRO process has a significant effect on controlling the salinity gradient energy or osmotic energy generation. Membrane fouling and operating conditions such as temperature have an extreme influence on the efficiency of the PRO processes because of their roles in salt and water transportation through the PRO membranes. In this study, the temperature impact on the power density and the fouling of two industrial semi-permeable membranes in the PRO system was investigated using river and synthetic sea water. Based on the findings, the power densities were 17.1 and 14.2 W/m2 at 5 °C for flat sheet and hollow fiber membranes, respectively. This is the first time that research indicates that power density at low temperature is feasible for generating electricity using PRO processes. These results can be promising for regions with high PRO potential that experience low temperatures most of the year.


Water ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1133
Author(s):  
Jacobo M. Salamanca ◽  
Oscar Álvarez-Silva ◽  
Aldemar Higgins ◽  
Fernando Tadeo

The gain in net power produced by Salinity Gradient plants in river mouths due to the optimal location of water intakes is analysed in this paper. More precisely, this work focuses on stratified river mouths and the membrane-based technology of Pressure-Retarded Osmosis. A methodology for this analysis is proposed and then applied to a case study in Colombia. Temperature, salinity and water discharge data were gathered at the Magdalena river mouth to develop a hydrodynamic model that represents the salinity profile along the river channel. The net power production of a pressure-retarded osmosis plant is then estimated based on the power produced at membrane level, considering different locations for the saltwater and freshwater intakes. The most adequate locations for the intakes are then deduced by balancing higher power production (due to higher salinity differences between the water intakes) with lower pumping costs (due to shorter pumping distances from the intakes). For the case study analysed, a gain of 14% can be achieved by carefully selecting the water intakes.


Author(s):  
Waqas Akram ◽  
Mostafa H. Sharqawy

Energy can be generated from two streams of different salt concentration using the osmotic pressure difference. Different methods have been proposed to harvest this energy. Pressure retarded osmosis (PRO) is investigated as a viable method and most promising technology. In PRO process, pure water permeates through a semi permeable membrane from the low hydrostatic pressure stream (feed solution) to the higher hydrostatic pressure stream (draw solution) due to the osmotic pressure difference. This increases the volume flow rate of the pressurized draw stream and energy is obtained by depressurizing the draw stream through a hydro turbine. In this study a one-dimensional computational model is developed to precisely estimate the power production under different operating conditions. Different feed and draw solution concentrations are used to estimate the power production from PRO. The maximum power density (power per unit membrane area), using available membrane characteristics, obtained from seawater–freshwater streams is 2.6 W/m2 and for the disposed brine–seawater streams is 9.1 W/m2. The performance of PRO process is very sensitive to the membrane characteristics in particular to the water permeability and PRO module configuration.


Desalination ◽  
2019 ◽  
Vol 457 ◽  
pp. 8-21 ◽  
Author(s):  
Rafael Ortiz-Imedio ◽  
Lucia Gomez-Coma ◽  
Marcos Fallanza ◽  
Alfredo Ortiz ◽  
Raquel Ibañez ◽  
...  

Desalination ◽  
2017 ◽  
Vol 404 ◽  
pp. 291-303 ◽  
Author(s):  
Hyung Won Chung ◽  
Kishor G. Nayar ◽  
Jaichander Swaminathan ◽  
Karim M. Chehayeb ◽  
John H. Lienhard V

Author(s):  
Brian Janke ◽  
Thomas Kuehn

Thermodynamic analysis has been conducted for geothermal power cycles using a portion of deep ground sequestered CO2 as the working fluid. This allows energy production from much shallower depths and in geologic areas with much lower temperature gradients than those of current geothermal systems. Two different system designs were analyzed for power production with varying reservoir parameters, including reservoir depth, temperature, and CO2 mass flow rate. The first design is a direct single-loop system with the CO2 run directly through the turbine. This system was found to provide higher system efficiency and power production, however design complications such as the need for high pressure turbines, two-phase flow through the turbine and the potential for water-CO2 brine mixtures, could require the use of numerous custom components, driving up the cost. The second design is a binary system using CO2 as the heat transfer fluid to supply thermal energy to an Organic Rankine Cycle (ORC). While this system was found to have slightly less power production and efficiency than the direct system, it significantly reduces the impact of design complications associated with the direct system. This in turn reduces the necessity for certain custom components, thereby reducing system cost. While performance of these two systems is largely dependent on location and operating conditions, the binary system is likely applicable to a larger number of sites and will be more cost effective when used in combination with current off-the-shelf ORC power plants.


Sign in / Sign up

Export Citation Format

Share Document