A CFD study on the effect of membrane permeance on permeate flux enhancement generated by unsteady slip velocity

2018 ◽  
Vol 556 ◽  
pp. 138-145 ◽  
Author(s):  
S.Y. Lim ◽  
Y.Y. Liang ◽  
G.A. Fimbres Weihs ◽  
D.E. Wiley ◽  
D.F. Fletcher
2001 ◽  
Vol 1 (5-6) ◽  
pp. 381-386
Author(s):  
A. Kołtuniewicz

The microfiltration and ultrafiltration processes are considered as matured membrane processes that are well established in industrial practice. Nevertheless, the main obstacles of their further development in the new competitive implementations are the economical problems. The key economic factors are permeate flux and energy consumption. However, although the cross-flow systems enable us to attain higher flux, it is usually very expensive. The high energy is consumed to maintain circulation velocity of the retentate that is sufficient for sweeping out the retained component from the membrane surface. Moreover in the case of cells separation the high intensity of the fouling and low cake permeability makes it necessary to apply additional efforts, such as backflushing, backpulsing, promoters of turbulence, vibrations, ultrasounds and many other. Therefore, dead-end systems are still quite competitive with cross-flow, especially for diluted (less than 0.5% of dry mass) suspensions or solutions. Cell separation with membranes is one of the most vivid problems for modern biotechnology, wastewater and water treatment. Membranes offer mild process conditions and high selectivity of separation. This enables us to solve a variety of problems such as cell culturing, fractionation, concentration, purification and sterilisation. The selected cells may be precisely separated from other components of broth and subsequently directed into the reaction space again in good conditions to ensure a quasi-continuous mode of operation. Moreover, membranes enable us to attain high efficiency of the bioconversion by removal of all product and inhibitors directly from the bioreactor. This is the reason for the huge interest in cell separation with membranes. The idea of the paper was to present the new concept of flux enhancement for cell separation on membranes. This concept lies in taking advantage of the specific rheological nature of biopolymers, which are the main foulants. The biopolymers retained on the membrane surface (i.e. on the top layer) can be applied as a lubricant for the cells that can settle on such a ‘movable layer’. As is shown, further in the paper, the thickness of the moving layer is lower and the flux is greater. The common movement of the cells and gel layer is very convenient from the cells integrity point of view. However the hydrodynamic conditions always play an important role in cross-flow systems; the resistance of ultrafiltration membranes may be reduced much more when compared with more open microfiltration membranes.


2018 ◽  
Vol 2 (1) ◽  

This study investigates the membrane performance and fouling control in the bubble-assisted sweeping gas membrane distillation with high concentration saline (333 K saturated solution) as feed. The results show that longer bubbling interval (3 min) at a fixed bubbling duration of 30s can most efficiently increase the the flux enhancement ratio up to 1.518. Next, the flux increases with the gas flowrate under a relatively lower level, but tends to a plateau after the threshold level (1.2 L•min-1). Compared to non-bubbling case, the permeate flux reaches up to 1.623 fold at a higher bubble relative humidity of 80 %. It was also found that greater flux enhancement can be achieved and meanwhile dramatic flux decline can be delayed for an intermittent bubbling system with a smaller nozzle size. These results accord well with the observations of fouling deposition in situ on the membrane surface with SEM.


2013 ◽  
Vol 10 (3) ◽  
pp. 461-469

Enhancement of the permeate flux due to reduction of cake layer resistance by air-liquid twophase flow in a cross flow spiral wound microfiltration membrane has been investigated. Experiments were carried out with two different suspension systems, namely baker’s yeast suspension with a dry mass concentration of 5.4 kg m-3 and the colloidal suspension of starch and bacteria having a dry mass concentration of 3.41 kg m-3. An air-liquid two-phase flow was generated by injecting the air at the inlet of the membrane module and was fed into a horizontally mounted assembly of a spiral wound microfiltration membrane. The effect of air dispersion was studied on flux enhancement, specific cake layer resistance and loading of cake mass on the membrane surface. This study shows that by air dispersion, the permeate flux can be enhanced up to 60 percent for the colloidal suspension of starch and bacteria while a flux enhancement of 40 percent was achieved for yeast suspension. The specific cake layer resistance reduced by a factor of 10 for both of the suspensions when air was injected into the feed stream. The results of this study depict that the technique of air dispersion is effective in increasing the permeate flux for the suspension systems containing below and above micron sized particulates.


Fuel ◽  
2013 ◽  
Vol 111 ◽  
pp. 180-185 ◽  
Author(s):  
Kuan-Ting Liu ◽  
Fang-Ling Liang ◽  
Yi-Feng Lin ◽  
Kuo-Lun Tung ◽  
Tsair-Wang Chung ◽  
...  

2020 ◽  
Vol 201 ◽  
pp. 150-168
Author(s):  
Chii-Dong Ho ◽  
Luke Chen ◽  
Kun-Yi Wu ◽  
Chi-Hsiang Ni ◽  
Thiam Leng Chew

2016 ◽  
Vol 146 ◽  
pp. 189-198 ◽  
Author(s):  
Yong Yeow Liang ◽  
Gustavo Fimbres Weihs ◽  
Ridwan Setiawan ◽  
Dianne Wiley

2014 ◽  
Vol 470 ◽  
pp. 378-388 ◽  
Author(s):  
Y.Y. Liang ◽  
M.B. Chapman ◽  
G.A. Fimbres Weihs ◽  
D.E. Wiley

2008 ◽  
Vol 315 (1-2) ◽  
pp. 58-66 ◽  
Author(s):  
Srimanta Pal ◽  
Swati Ambastha ◽  
Timir Baran Ghosh ◽  
Sirshendu De ◽  
Sunando DasGupta

Sign in / Sign up

Export Citation Format

Share Document