scholarly journals Accelerated Reliability Testing of Cu-Al Bimetallic Contact by a Micropattern Corrosion Testing Platform for Wire Bond Device Application

MethodsX ◽  
2021 ◽  
pp. 101320
Author(s):  
Goutham Issac Ashok Kumar ◽  
John Alptekin ◽  
Joshua Caperton ◽  
Ashish Salunke ◽  
Oliver Chyan
Author(s):  
Ary Sutrischastini ◽  
Ratna Setyani

This research goal is to identification and evaluation influence of work motivation and work environment to employee’s performance in BAPPEDA Kabupaten Wonosobo. The object of this research is 37 employees of Badan Perencanaan Pembangunan Kabupaten Wonosobo. And the location of this research is at Badan Perencanaan Pembangunan Kabupaten Wonosobo. The analysis used is test validity, reliability testing, and test the hypothesis, with the help of the computer program SPSS version 17, using multiple linear regression analysis. Based on calculations of data and analysis used, the regression equation is obtained: Y = 11.733 + 0.320 X1 +0.334 X2 + ε, by using the equation regression analytical method can conclude that (X1) take effect positively against employees performance. With t value in amount of 2,219 (bigger than t in table in amount of 1,690) and significance value in amount of 0,33. By applying significance limited value in amount of 0,05, it means, hypothesis that claim if work motivation take effect against employees performance can be accepted. There is a positive and significant correlation between work environment variables (X2) against employees. With t value in amount of 2,219 (bigger than t in table in amount of 1,690) and significance value in amount of 0,33 (smaller than 0,5). Simultaneously, work motivation take effect positively and significantly against employees performance with the F value in amount of 11,562 (bigger than 0.05), then obtained significance value 0.000. It can be concluded that the work motivation and work environment has a positive and significant influence on employee performance in BAPPEDA Kabupaten Wonosobo.


2002 ◽  
Vol 722 ◽  
Author(s):  
T. S. Sriram ◽  
B. Strauss ◽  
S. Pappas ◽  
A. Baliga ◽  
A. Jean ◽  
...  

AbstractThis paper describes the results of extensive performance and reliability characterization of a silicon-based surface micro-machined tunable optical filter. The device comprises a high-finesse Fabry-Perot etalon with one flat and one curved dielectric mirror. The curved mirror is mounted on an electrostatically actuated silicon nitride membrane tethered to the substrate using silicon nitride posts. A voltage applied to the membrane allows the device to be tuned by adjusting the length of the cavity. The device is coupled optically to an input and an output single mode fiber inside a hermetic package. Extensive performance characterization (over operating temperature range) was performed on the packaged device. Parameters characterized included tuning characteristics, insertion loss, filter line-width and side mode suppression ratio. Reliability testing was performed by subjecting the MEMS structure to a very large number of actuations at an elevated temperature both inside the package and on a test board. The MEMS structure was found to be extremely robust, running trillions of actuations without failures. Package level reliability testing conforming to Telcordia standards indicated that key device parameters including insertion loss, filter line-width and tuning characteristics did not change measurably over the duration of the test.


Sign in / Sign up

Export Citation Format

Share Document