Zeta potential changing self-emulsifying drug delivery systems utilizing a novel Janus-headed surfactant: A promising strategy for enhanced mucus permeation

2019 ◽  
Vol 291 ◽  
pp. 111285 ◽  
Author(s):  
Faezeh Sharifi ◽  
Imran Nazir ◽  
Mulazim Hussain Asim ◽  
Mansour Jahangiri ◽  
Pedram Ebrahimnejad ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Zeta Potential ◽  
Drug Delivery Systems ◽  
Delivery Systems ◽  
Promising Strategy

A Triple-responsive Targeted Hybrid Liposomes with High MRI Performance for Tumor Diagnosis and Therapy

2021 ◽  
Author(s):  
Weihe Yao ◽  
Chenyu Liu ◽  
Ning Wang ◽  
Hengjun Zhou ◽  
Hailiang Chen ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Drug Delivery Systems ◽  
Tumor Therapy ◽  
Delivery Systems ◽  
Tumor Diagnosis ◽  
Diagnosis And Therapy ◽  
Promising Strategy ◽  
Therapy And Diagnosis

The targeted multi-responsive drug delivery systems with MRI capacity were anticipated as a promising strategy for tumor therapy and diagnosis. Herein, we successfully synthesized anisamide-modified and non-modified UV/GSH-responsive molecules (10,10-NB-S-S-P-AA...

scholarly journals Self-microemulsifying drug delivery systems of Moringa oleifera extract for enhanced dissolution of kaempferol and quercetin

2020 ◽  
Vol 70 (1) ◽  
pp. 77-88 ◽  
Author(s):  
Namfa Sermkaew ◽  
Thipapun Plyduang
Keyword(s):  
Drug Delivery ◽  
Drug Delivery Systems ◽  
Moringa Oleifera ◽  
Delivery Systems ◽  
Polyethylene Glycol 400 ◽  
Peg 400 ◽  
Enhanced Dissolution ◽  
Promising Strategy ◽  
Herbal Medicinal ◽  
Percentage Ratio

AbstractThe aim of the present study was to develop self-microemulsifying drug delivery systems (SMEDDS) of the extract of Moringa oleifera, a herbal medicinal plant. Kaempferol and quercetin, the flavonoids present in the leaf extract of M. oleifera, were chosen as markers for quantification. The optimized formulation of SMEDDS consisted of propylene glycol dicaprylocaprate, polysorbate 80, and polyethylene glycol 400 (PEG 400) in a percentage ratio of 20:60:20 (m/m). SMEDDS emulsified immediately (within 20 s) after dilution in water, resulting in transparent microemulsions with a droplet size of 49 nm. SMEDDS could increase the solubility of kaempferol and quercetin to nearly 100 % within 15 min, whereas only a 30 % improvement in solubility was achieved in the case of crude extract. These results demonstrated SMEDDS to be a promising strategy to improve the solubility of M. oleifera extract-derived drugs, which, in turn, could prove beneficial to the herbal medicine field.

scholarly journals New Opportunity to Formulate Intranasal Vaccines and Drug Delivery Systems Based on Chitosan

2020 ◽  
Vol 21 (14) ◽  
pp. 5016
Author(s):  
Roxana Popescu ◽  
Mihaela Violeta Ghica ◽  
Cristina-Elena Dinu-Pîrvu ◽  
Valentina Anuța ◽  
Dumitru Lupuliasa ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Surface Tension ◽  
Zeta Potential ◽  
Conformational Changes ◽  
Drug Delivery Systems ◽  
Delivery Systems ◽  
Active Pharmaceutical Ingredients ◽  
Nasal Drug Delivery ◽  
Pharmaceutical Ingredients ◽  
Permeability Enhancement

In an attempt to develop drug delivery systems that bypass the blood–brain barrier (BBB) and prevent liver and intestinal degradation, it was concluded that nasal medication meets these criteria and can be used for drugs that have these drawbacks. The aim of this review is to present the influence of the properties of chitosan and its derivatives (mucoadhesion, permeability enhancement, surface tension, and zeta potential) on the development of suitable nasal drug delivery systems and on the nasal bioavailability of various active pharmaceutical ingredients. Interactions between chitosan and proteins, lipids, antigens, and other molecules lead to complexes that have their own applications or to changing characteristics of the substances involved in the bond (conformational changes, increased stability or solubility, etc.). Chitosan and its derivatives have their own actions (antibacterial, antifungal, immunostimulant, antioxidant, etc.) and can be used as such or in combination with other molecules from the same class to achieve a synergistic effect. The applicability of the properties is set out in the second part of the paper, where nasal formulations based on chitosan are described (vaccines, hydrogels, nanoparticles, nanostructured lipid carriers (NLC), powders, emulsions, etc.).

Phosphorylated PEG-emulsifier: Powerful tool for development of zeta potential changing self-emulsifying drug delivery systems (SEDDS)

2020 ◽  
Vol 150 ◽  
pp. 77-86 ◽  
Author(s):  
Julian Dominik Wolf ◽  
Markus Kurpiers ◽  
Roman Xaver Götz ◽  
Sergey Zaichik ◽  
Andrea Hupfauf ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Zeta Potential ◽  
Drug Delivery Systems ◽  
Delivery Systems

Design and Characterization of Self-Nanoemulsifying Drug Delivery Systems of Rosuvastatin

2018 ◽  
Vol 11 (2) ◽  
pp. 4042-4052
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Priya Keerthi
Keyword(s):  
Drug Delivery ◽  
Zeta Potential ◽  
Oral Bioavailability ◽  
Drug Delivery Systems ◽  
Ternary Phase Diagram ◽  
Delivery Systems ◽  
Water Soluble ◽  
Lipid Lowering ◽  
Tween 20 ◽  
Onset Of Action

Development of self-emulsifying drug delivery systems (SEDDS) are becoming more popular to improve the oral bioavailability of poorly water-soluble drugs. Rosuvastatin is a lipid-lowering agent used in patients suffering from dyslipidemia. It is a competitive inhibitor of 3-hydroxy 3-methyl glutaryl coenzyme A, which converts mevalonate to cholesterol. Rosuvastatin is a BCS class II (poor solubility) drug; hence, SNEDDS are being formulated to enhance oral bioavailability of the drug. In the present study, rosuvastatin SNEDDS were formulated using different oils, surfactant and co-surfactant. The optimized formulation F9 has composition of Las (PEG-8-Caprylic glycerides), Maisine 35-1 and Tween 20 as oil phase, surfactant and co-surfactant respectively. Composition of SNEDDS was optimized using Pseudo-ternary phase diagram, where the formulations showed increased self-emulsification with increased concentration of surfactants. Formulation F9 was found to be best formulation based on evaluation parameters. The particle size of the optimized SNEDDS formulation was found to be 10.9 nm & Z-Average of 55.6 nm indicating all the particles were in the nanometer range. The zeta potential of the optimized SNEDDS formulation was found to be -11.2 mV, which comply with the requirement of the zeta potential for stability. The developed rosuvastatin SNEDDS have the potential to minimize the variability in absorption and provide rapid onset of action of the drug.   

Development and in vitro evaluation of zeta potential changing self-emulsifying drug delivery systems for enhanced mucus permeation

2016 ◽  
Vol 510 (1) ◽  
pp. 255-262 ◽  
Author(s):  
Wongsakorn Suchaoin ◽  
Irene Pereira de Sousa ◽  
Kesinee Netsomboon ◽  
Hung Thanh Lam ◽  
Flavia Laffleur ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Zeta Potential ◽  
Drug Delivery Systems ◽  
Delivery Systems ◽  
In Vitro Evaluation

scholarly journals FORMULATION, DEVELOPMENT AND CHARACTERIZATION OF DRUG DELIVERY SYSTEMS BASED TELMISARTAN ENCAPSULATED IN SILK FIBROIN NANOSPHERE’S

2019 ◽  
Vol 11 (1) ◽  
pp. 247 ◽  
Author(s):  
Shahid Ud Din Wani ◽  
Gangadharappa H. V. ◽  
Ashish N. P.
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Zeta Potential ◽  
Silk Fibroin ◽  
Drug Delivery Systems ◽  
Delivery Systems ◽  
Water Soluble ◽  
Random Coil ◽  
Burst Release

Objective: The aim of the present work was to formulate silk fibroin (SF) nanospheres (NS’s) for drug delivery application. The current study was designed to advance the water solubility and bio-availability of telmisartan by nanoprecipitation method.Methods: SF NS’s loaded with TS were prepared by nanoprecipitation method. The drug was dissolved in aqueous solution of SF by using acetone as a non-solvent. The prepared NS’s were then characterized by FTIR, X-ray diffraction and zeta potential, and were evaluated for its, surface morphology, %drug content, encapsulation efficiency and in vitro drug release.Results: The evaluation results of SF NS’s loaded of TS showed 74.22±0.17 % entrapment efficiency, 35.21±0.02 % of drug loading, and-4.9 mV to-13.6 mV of zeta potential due to the proper bounding of TS with the β-sheets of SF, the particle size reported was within the size range of 160-186 nm having smooth surface and were spherical in shape. The SFNS’s pattern switched from random coil to β-sheet formation on treating with acetone. FTIR and DSC studies marked no such inter-molecular interactions between SF and drug molecules. The % cumulative in vitro drug release from SF NS’s exhibited quick burst release. The in vitro cumulative drug release of SF NS’s of TS it was found that about 74% of the drug was released within 8 h and about 96% of drug released at 24 hr. The rate of drug release increased with the increase in SF ratio.Conclusion: It is believed that these SF NS’s will find potential applications in drug delivery release as drug carriers, especially poor water-soluble drugs. All these results proposed that SF NS’s are eventuality handy in various drug delivery systems.

scholarly journals Linagliptin loaded Solid-SMEEDS for enhanced solubility and dissolution: Formulation development and optimization by D-optimal design

2019 ◽  
Vol 9 (2) ◽  
pp. 47-56
Author(s):  
Madhubhai M Patel ◽  
Rahulkumar J Patel
Keyword(s):  
Electron Microscopy ◽  
Drug Delivery ◽  
Transmission Electron Microscopy ◽  
Optimal Design ◽  
Zeta Potential ◽  
Drug Delivery Systems ◽  
Delivery Systems ◽  
Dissolution Profile ◽  
Transmission Electron

The aim of the present investigation was to formulate and evaluate solid self-micro emulsifying drug-delivery systems (S-SMEDDS) to improve solubility and dissolution profile of Linagliptin. Solubility of Linagliptin in different oils, surfactants and co-surfactants was assessed and optimizations of pseudo-ternary plots were also carried out for preparation of liquid SMEDDS. D-optimal design mixture was used in the optimization of Linagliptin loaded liquid SMEEDS. The optimized SMEEDS were characterized for globule size, zeta potential, dilution stability, transmittance, pH and in-vitro release profile. The morphology of the Linagliptin SMEEDS was observed by Transmission Electron Microscopy (TEM). Among the different silicates, Nusillin US2 was used as the solid carrier/absorbent to formulate S-SMEEDS of Linagliptin. Improved in-vitro dissolution profile of optimized formulation was observed, resulting in multifold improvement in the absorption profile of Linagliptin as compared with pure drug. In a nutshell, this optimized S-SMEDD formulation holds great promise for enhancement of its physiochemical and biological attributes. Keywords: Linagliptin, Solid Self-micro Emulsifying Drug Delivery Systems, D-optimal design, Zeta-potential, Transmission Electron Microscopy

Sign in / Sign up

Export Citation Format

Share Document