Lifetime improvement of nitrided carbon stripper foils by ion-beam sputtering with a binary gas mixture

Nitrogen-doped TiO2 films were prepared by reactive ion-beam sputtering deposition (IBSD) in a mixed atmosphere of NH3 and O2 at a substrate temperature of 400 °C. X-ray photoelectron spectra revealed the presence of six ions, i.e., N3−, N2−, N1−, N+, N2+, and N3+, respectively, in the films. The amorphous films had complex, randomly oriented chemical bonds. The Tauc–Lorentz model was employed to determine the bandgap energy of the amorphous films prepared using different NH3/O2 gas mixing ratios by ellipsometry. In addition, the optical constants of the films were measured. With the increase in the NH3/O2 gas mixture ratio to 3.0, the bandgap of N-doped TiO2 narrowed to ~2.54 eV.

Download Full-text

Direct Observations of the Epitaxial Growth of Sputtered Ag on Si

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100071053 ◽

1973 ◽

Vol 31 ◽

pp. 122-123

Author(s):

J. S. Maa ◽

Thos. E. Hutchinson

Keyword(s):

Epitaxial Growth ◽

Film Growth ◽

Ion Beam ◽

Ion Beam Sputtering ◽

Microscopy Technique ◽

Direct Observations ◽

In Situ Electron Microscopy ◽

Beam Sputtering ◽

The Subject

The growth of Ag films deposited on various substrate materials such as MoS2, mica, graphite, and MgO has been investigated extensively using the in situ electron microscopy technique. The three stages of film growth, namely, the nucleation, growth of islands followed by liquid-like coalescence have been observed in both the vacuum vapor deposited and ion beam sputtered thin films. The mechanisms of nucleation and growth of silver films formed by ion beam sputtering on the (111) plane of silicon comprise the subject of this paper. A novel mode of epitaxial growth is observed to that seen previously.The experimental arrangement for the present study is the same as previous experiments, and the preparation procedure for obtaining thin silicon substrate is presented in a separate paper.

Download Full-text

TEM Study of Co/Pd and Co/Au Multilayers

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100151015 ◽

1993 ◽

Vol 51 ◽

pp. 1036-1037

Author(s):

A.E.M. De Veirman ◽

F.J.G. Hakkens ◽

W.M.J. Coene ◽

F.J.A. den Broeder

Keyword(s):

Magnetic Anisotropy ◽

Ion Beam ◽

Perpendicular Magnetic Anisotropy ◽

Optical Recording ◽

Magnetic Multilayer ◽

Ion Beam Sputtering ◽

Cross Sectional ◽

Transmission Electron ◽

Beam Sputtering ◽

Substrate Temperatures

There is currently great interest in magnetic multilayer (ML) thin films (see e.g.), because they display some interesting magnetic properties. Co/Pd and Co/Au ML systems exhibit perpendicular magnetic anisotropy below certain Co layer thicknesses, which makes them candidates for applications in the field of magneto-optical recording. It has been found that the magnetic anisotropy of a particular system strongly depends on the preparation method (vapour deposition, sputtering, ion beam sputtering) as well as on the substrate, underlayer and deposition temperature. In order to get a better understanding of the correlation between microstructure and properties a thorough cross-sectional transmission electron microscopy (XTEM) study of vapour deposited Co/Pd and Co/Au (111) MLs was undertaken (for more detailed results see ref.).The Co/Pd films (with fixed Pd thickness of 2.2 nm) were deposited on mica substrates at substrate temperatures Ts of 20°C and 200°C, after prior deposition of a 100 nm Pd underlayer at 450°C.

Download Full-text