Geometric dependence of image quality in digital tomosynthesis: Simulations of X-ray source trajectories and scan angles

2020 ◽  
Vol 969 ◽  
pp. 163997
Author(s):  
Youngjin Lee ◽  
Seungwan Lee
Keyword(s):  
Image Quality ◽  
Digital Tomosynthesis ◽  
X Ray

scholarly journals 3D chest tomosynthesis using a stationary flat panel source array and a stationary detector: A Monte Carlo proof of concept.

2021 ◽  
Author(s):  
Thomas George Primidis ◽  
Stephen G Wells ◽  
Vadim Y Soloviev ◽  
Carsten P Welsch
Keyword(s):  
Monte Carlo ◽  
Image Quality ◽  
3D Imaging ◽  
Low Cost ◽  
Input Power ◽  
Digital Tomosynthesis ◽  
Cold Cathode ◽  
X Ray ◽  
3D Scans ◽  
Square Array

Abstract 3D imaging modalities such as computed tomography and digital tomosynthesis typically scan the patient from different angles with a lengthy mechanical movement of a single X-ray tube. Therefore, millions of 3D scans per year require expensive mechanisms to support a heavy X-ray source and have to compensate for machine vibrations and patient movements. However, recent developments in cold-cathode field emission technology allow the creation of compact, stationary arrays of emitters. Adaptix Ltd. has developed a novel, low-cost, square array of such emitters and demonstrated 3D digital tomosynthesis of human extremities and small animals. The use of cold-cathode field emitters also makes the system compact and lightweight. This paper presents Monte Carlo simulations of a concept upgrade of the Adaptix system from the current 60 kVp to 90 kVp and 120 kVp which are better suited for chest imaging. Between 90 kVp and 120 kVp, 3D image quality appears insensitive to voltage and at 90 kVp the photon yield is reduced by 40-50% while effective dose declines by 14%. A square array of emitters can adequately illuminate a subject for tomosynthesis from a shorter source-to-image distance, thereby reducing the required input power, and offsetting the 28-50% more input power that is required for operation at 90 kVp. This modelling suggests that lightweight, stationary cold-cathode X-ray source arrays could be used for chest tomosynthesis at a lower voltage, with less dose and without sacrificing image quality. This will reduce weight, size and cost, enabling 3D imaging to be brought to the bedside.

Image Quality Analysis of X-ray Grating Interferometer Using Integrating-bucket Method

2020 ◽  
Vol 64 (2) ◽  
pp. 20503-1-20503-5
Author(s):  
Faiz Wali ◽  
Shenghao Wang ◽  
Ji Li ◽  
Jianheng Huang ◽  
Yaohu Lei ◽  
...  
Keyword(s):  
Image Quality ◽  
Phase Contrast ◽  
Quality Analysis ◽  
Phase Contrast Imaging ◽  
Phase Image ◽  
Contrast Imaging ◽  
High Quality ◽  
Image Quality Analysis ◽  
X Ray ◽  
Grating Interferometer

Abstract Grating-based x-ray phase-contrast imaging has the potential to enhance image quality and provide inner structure details non-destructively. In this work, using grating-based x-ray phase-contrast imaging system and employing integrating-bucket method, the quantitative expressions of signal-to-noise ratios due to photon statistics and mechanical error are analyzed in detail. Photon statistical noise and mechanical error are the main sources affecting the image noise in x-ray grating interferometry. Integrating-bucket method is a new phase extraction method translated to x-ray grating interferometry; hence, its image quality analysis would be of great importance to get high-quality phase image. The authors’ conclusions provide an alternate method to get high-quality refraction signal using grating interferometer, and hence increases applicability of grating interferometry in preclinical and clinical usage.

scholarly journals Correlation of image quality parameters with tube voltage in X-ray dark-field chest radiography: a phantom study

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Andreas P. Sauter ◽  
Jana Andrejewski ◽  
Manuela Frank ◽  
Konstantin Willer ◽  
Julia Herzen ◽  
...  
Keyword(s):  
Image Quality ◽  
Imaging Modality ◽  
Signal Strength ◽  
Dark Field ◽  
Tube Voltage ◽  
X Ray ◽  
Dose Area Product ◽  
Dark Field Imaging ◽  
Field Imaging

AbstractGrating-based X-ray dark-field imaging is a novel imaging modality with enormous technical progress during the last years. It enables the detection of microstructure impairment as in the healthy lung a strong dark-field signal is present due to the high number of air-tissue interfaces. Using the experience from setups for animal imaging, first studies with a human cadaver could be performed recently. Subsequently, the first dark-field scanner for in-vivo chest imaging of humans was developed. In the current study, the optimal tube voltage for dark-field radiography of the thorax in this setup was examined using an anthropomorphic chest phantom. Tube voltages of 50–125 kVp were used while maintaining a constant dose-area-product. The resulting dark-field and attenuation radiographs were evaluated in a reader study as well as objectively in terms of contrast-to-noise ratio and signal strength. We found that the optimum tube voltage for dark-field imaging is 70 kVp as here the most favorable combination of image quality, signal strength, and sharpness is present. At this voltage, a high image quality was perceived in the reader study also for attenuation radiographs, which should be sufficient for routine imaging. The results of this study are fundamental for upcoming patient studies with living humans.

Chest Imaging with Dual-Energy Subtraction Digital Tomosynthesis

1993 ◽  
Vol 34 (4) ◽  
pp. 346-350 ◽  
Author(s):  
S. Sone ◽  
T. Kasuga ◽  
F. Sakai ◽  
H. Hirano ◽  
K. Kubo ◽  
...  
Keyword(s):  
Low Voltage ◽  
Image Data ◽  
Dual Energy ◽  
Processing Unit ◽  
Digital Tomosynthesis ◽  
Chest Imaging ◽  
Layer Height ◽  
Pulmonary Lesions ◽  
X Ray ◽  
Energy Subtraction

Dual-energy subtraction digital tomosynthesis with pulsed X-ray and rapid kV switching was used to examine calcifications in pulmonary lesions. The digital tomosynthesis system used included a conventional fluororadiographic TV unit with linear tomographic capabilities, a high resolution videocamera, and an image processing unit. Low-voltage, high-voltage, and soft tissue subtracted or bone subtracted tomograms of any desired layer height were reconstructed from the image data acquired during a single tomographic swing. Calcifications, as well as their characteristics and distribution in pulmonary lesions, were clearly shown. The images also permitted discrimination of calcifications from dense fibrotic lesions. This technique was effective in demonstrating calcifications together with a solitary mass or disseminated nodules.

The Effect of X-Ray Spectra from Molybdenum and Tungsten Target Tubes on Image Quality in Mammography

Radiology ◽  
1976 ◽  
Vol 118 (3) ◽  
pp. 705-709 ◽  
Author(s):  
Arthur G. Haus ◽  
Charles E. Metz ◽  
John T. Chiles ◽  
Kurt Rossmann
Keyword(s):  
Image Quality ◽  
X Ray ◽  
Tungsten Target ◽  
And Tungsten

Effect of acquisition parameters on image quality in digital tomosynthesis

2007 ◽  
Author(s):  
Timothy Deller ◽  
Kadri N. Jabri ◽  
John M. Sabol ◽  
Xianfeng Ni ◽  
Gopal Avinash ◽  
...  
Keyword(s):  
Image Quality ◽  
Digital Tomosynthesis

Using 100- instead of 120-kVp computed tomography to diagnose pulmonary embolism almost halves the radiation dose with preserved diagnostic quality

2010 ◽  
Vol 51 (3) ◽  
pp. 260-270 ◽  
Author(s):  
Peter Björkdahl ◽  
Ulf Nyman
Keyword(s):  
Computed Tomography ◽  
Pulmonary Embolism ◽  
Image Quality ◽  
Radiation Dose ◽  
Effective Dose ◽  
Ct Number ◽  
Subjective Image Quality ◽  
Diagnostic Quality ◽  
X Ray ◽  
Tube Potential

Background: Concern has been raised regarding the mounting collective radiation doses from computed tomography (CT), increasing the risk of radiation-induced cancers in exposed populations. Purpose: To compare radiation dose and image quality in a chest phantom and in patients for the diagnosis of pulmonary embolism (PE) at 100 and 120 peak kilovoltage (kVp) using 16-multichannel detector computed tomography (MDCT). Material and Methods: A 20-ml syringe containing 12 mg I/ml was scanned in a chest phantom at 100/120 kVp and 25 milliampere seconds (mAs). Consecutive patients underwent 100 kVp ( n = 50) and 120 kVp ( n = 50) 16-MDCT using a “quality reference” effective mAs of 100, 300 mg I/kg, and a 12-s injection duration. Attenuation (CT number), image noise (1 standard deviation), and contrast-to-noise ratio (CNR; fresh clot = 70 HU) of the contrast medium syringe and pulmonary arteries were evaluated on 3-mm-thick slices. Subjective image quality was assessed. Computed tomography dose index (CTDIvol) and dose–length product (DLP) were presented by the CT software, and effective dose was estimated. Results: Mean values in the chest phantom and patients changed as follows when X-ray tube potential decreased from 120 to 100 kVp: attenuation +23% and +40%, noise +38% and +48%, CNR −6% and 0%, and CTDIvol −38% and −40%, respectively. Mean DLP and effective dose in the patients decreased by 42% and 45%, respectively. Subjective image quality was excellent or adequate in 49/48 patients at 100/120 kVp. No patient with a negative CT had any thromboembolism diagnosed during 3-month follow-up. Conclusion: By reducing X-ray tube potential from 120 to 100 kVp, while keeping all other scanning parameters unchanged, the radiation dose to the patient may be almost halved without deterioration of diagnostic quality, which may be of particular benefit in young individuals.

Sign in / Sign up

Export Citation Format

Share Document