scholarly journals Two-degree-of-freedom VIV of circular cylinder with variable natural frequency ratio: Experimental and numerical investigations

2013 ◽  
Vol 73 ◽  
pp. 179-194 ◽  
Author(s):  
Narakorn Srinil ◽  
Hossein Zanganeh ◽  
Alexander Day
2020 ◽  
Author(s):  
Pierre-Adrien Opinel ◽  
Narakorn Srinil

Abstract This paper presents new laboratory experiments of two-degree-of-freedom vortex-induced vibration of a flexibly mounted vertical circular cylinder in regular waves. A new experimental model has been developed and tested in the Wind, Wave & Current Tank at Newcastle University. The system mass ratio is close to 3 and the cylinder aspect ratio based on its submerged length is close to 27. The Stokes first-order wave theory is considered to describe the depth-dependent, horizontal velocity amplitude of the wave flow in the circulating water tank. This wave theory is satisfactorily validated by the wave probe measurement. The effects of cylinder stiffness affecting system natural frequencies are also investigated by using a combination of different spring setups in in-line and cross-flow directions. For each set of springs, VIV tests are performed in regular waves, with flow frequency ranging from 0.4 to 1 Hz and amplitude from 0.01 to 0.09 m. The associated Reynolds number at the water surface is in a range of 1.7 × 103–1.5 × 104. The surface Keulegan-Carpenter number (KC) is in the range of 2 < KC < 28 while the surface reduced velocity (Vr) is in the range of 0.5 < Vr < 16 depending on the implemented spring stiffness. Combined in-line/cross-flow oscillations of the cylinder are measured using two non-intrusive Qualisys cameras and the associated data acquisition system. The spring forces are also acquired using four load cells. Results reveal that, depending on KC and Vr, the cylinder primarily oscillates at the flow frequency in the in-line direction and at an integer (mainly 2, 3 and 4) multiple of the flow frequency in the cross-flow direction. Such occurrence of multi frequencies corroborates other experimental and numerical results in the literature. Several peculiar trajectories are observed, including infinity, butterfly, S and V shapes. The present experimental data of vibration amplitudes and oscillation frequencies in in-line/cross-flow directions as well as response patterns provide new results and improved understanding of VIV in oscillatory flows. These will be useful for the development of an industrial tool in predicting offshore structural responses in waves.


2019 ◽  
Vol 2019 ◽  
pp. 1-13
Author(s):  
Zhiqiang Huang ◽  
Xun Peng ◽  
Gang Li ◽  
Lei Hao

This paper is focused on the influence of the rough contact interfaces on the dynamics of a coupled mechanical system. For this purpose, a two-degree-of-freedom model of a coupled seismic-vibrator-rough-ground system is proposed with which the nonlinear vibration properties are analyzed. In this model, the force-deflection characteristic of the contact interfaces is determined by finite element analysis. By analyzing the undamped free vibration, it was found that the variation of the second-order natural frequency with amplitude increases with rougher contact interfaces; however, the amplitude has little influence on the first-order natural frequency of the system. For the harmonic excited analysis, the jump frequencies and hysteretic region both decrease with rougher contact interfaces. Moreover, it is inferred from the bifurcation diagrams that, increasing the excitation force, the system can bring about chaotic motions on rough contact interfaces.


Sign in / Sign up

Export Citation Format

Share Document