Theoretical study on the axial excitation force transmission characteristics of marine propellers

2019 ◽  
Vol 189 ◽  
pp. 106364 ◽  
Author(s):  
Donglin Zou ◽  
Chunxiao Jiao ◽  
Na Ta ◽  
Zhushi Rao
Keyword(s):  
Theoretical Study ◽  
Force Transmission ◽  
Transmission Characteristics ◽  
Marine Propellers ◽  
Axial Excitation ◽  
Excitation Force

scholarly journals Kinematic Synthesis of Tendon-Driven Manipulators with Isotropic Transmission Characteristics

1993 ◽  
Vol 115 (4) ◽  
pp. 884-891 ◽  
Author(s):  
Yeong-Jeong Ou ◽  
Lung-Wen Tsai
Keyword(s):  
Jacobian Matrix ◽  
Null Vector ◽  
Force Distribution ◽  
Force Transmission ◽  
Transmission Characteristics ◽  
Kinematic Synthesis ◽  
End Effector ◽  
Structure Matrix ◽  
Applied Forces ◽  
Matrix Design

This paper presents a methodology for kinematic synthesis of tendon-driven manipulators with isotropic transmission characteristics. The force transmission characteristics, from the end-effector space to the actuator space, has been investigated. It is shown that tendon forces required to act against externally applied forces are functions of the structure matrix, its null vector, and the manipulator Jacobian matrix. Design equations for synthesizing a manipulator to possess isotropic transmission characteristics are derived. It is shown that manipulators which possess isotropic transmission characteristics have much better force distribution among their tendons.

Analysis of Force Transmission Characteristics of Modular Deformable Tire

2020 ◽  
Vol 21 (5) ◽  
pp. 1121-1127 ◽  
Author(s):  
Kongshu Deng ◽  
Lu Zeng ◽  
Yicheng Ding ◽  
Zhurong Yin
Keyword(s):  
Force Transmission ◽  
Transmission Characteristics

scholarly journals Analysis of the Single Toggle Jaw Crusher Force Transmission Characteristics

2016 ◽  
Vol 2016 ◽  
pp. 1-9
Author(s):  
Moses Frank Oduori ◽  
David Masinde Munyasi ◽  
Stephen Mwenje Mutuli
Keyword(s):  
Mean Value ◽  
Force Transmission ◽  
Transmission Characteristics ◽  
Dead Weight ◽  
Mechanical Advantage ◽  
Jaw Crusher ◽  
Output Torque ◽  
The Mean ◽  
Balance Of Forces ◽  
Input Torque

This paper sets out to perform a static force analysis of the single toggle jaw crusher mechanism and to obtain the force transmission characteristics of the mechanism. In order to obtain force transmission metrics that are characteristic of the structure of the mechanism, such influences as friction, dead weight, and inertia are considered to be extraneous and neglected. Equations are obtained by considering the balance of forces at the moving joints and appropriately relating these to the input torque and the output torque. A mechanical advantage, the corresponding transmitted torque, and the variations thereof, during the cycle of motion of the mechanism, are obtained. The mechanical advantage that characterizes the mechanism is calculated as the mean value over the active crushing stroke of the mechanism. The force transmission characteristics can be used as criteria for the comparison of different jaw crusher mechanism designs in order to select the most suitable design for a given application. The equations obtained can also be used in estimating the forces sustained by the components of the mechanism.

Force Feedback Glove for Manipulation of Virtual Objects

1993 ◽  
Vol 5 (1) ◽  
pp. 79-84 ◽  
Author(s):  
Haruhisa Kawasaki ◽  
◽  
Takahiro Hayashi
Keyword(s):  
Feedback Control ◽  
Force Feedback ◽  
Joint Angle ◽  
Force Sensor ◽  
Servo Motor ◽  
Force Transmission ◽  
Transmission Characteristics ◽  
Angle Sensor ◽  
Virtual Objects ◽  
The Difference

This paper presents a new force feedback glove for manipulation of virtual objects. The glove is comprised of wire, link, servo motor, force sensor, and joint angle sensor of fingers. These devices are mounted to the back of glove. The object grasping sense is generated by the force feedback control of the servo motor. We show the force transmission characteristics of the glove and the experimental results of recognition of the difference in rigidity of object.

scholarly journals Force Transmission Characteristics for Thrust System in Rectangular Shield Machine

IEEE Access ◽  
2019 ◽  
Vol 7 ◽  
pp. 177804-177812
Author(s):  
Kongshu Deng ◽  
Yicheng Ding ◽  
Lu Zeng ◽  
Zhurong Yin
Keyword(s):  
Force Transmission ◽  
Transmission Characteristics ◽  
Thrust System ◽  
Shield Machine

Terahertz planar waveguide devices based on graphene

2017 ◽  
Vol 31 (05) ◽  
pp. 1750045
Author(s):  
Yizhe Yuan ◽  
Xiaoyong Guo ◽  
Liqun An ◽  
Wen Xu
Keyword(s):  
Dispersion Relation ◽  
Planar Waveguide ◽  
Theoretical Study ◽  
Transmission Characteristics ◽  
Linear Dispersion ◽  
Linear Dispersion Relation ◽  
Planar Structures ◽  
Waveguide Devices

We present a theoretical study on graphene-semiconductor planar structures. The frequency of the photonic modes in the structure, which can be efficiently tuned via varying the sample parameters, is within the terahertz (THz) bandwidth. Furthermore, it is found that a roughly linear dispersion relation can be obtained for photonic modes in the THz region. Hence, the proposed graphene-semiconductor planar structures can be served as THz waveguide with desirable transmission characteristics.

Theory of Isotropic Transmission for Tendon-Driven Manipulators

1994 ◽  
Author(s):  
Yeong-Jeong Ou ◽  
Lung-Wen Tsai
Keyword(s):  
General Theory ◽  
Power Transmission ◽  
Degree Of Freedom ◽  
Mechanical Power ◽  
Force Distribution ◽  
Static Force ◽  
Force Transmission ◽  
Transmission Characteristics ◽  
End Effector ◽  
Transmission Structure

Abstract This paper deals with the synthesis of the mechanical power transmission structure in tendon-driven manipulators. Based on the analysis of static force transmission from the actuator space to the end-effector space, a general theory is developed for the synthesis of tendon-driven manipulators with isotropic transmission characteristics. It is shown that an n-dof (degree of freedom) manipulator can possess these characteristics if it is made up of n+1 or 2n tendons and if its link lengths and pulley sizes are designed according to two equations of constraint. Two examples are used to demonstrate the theory. It is also shown that manipulators with an isotropic transmission structure do have more uniform force distribution among their tendons.

Design of a Three-Axis Articulated Tool Head With Parallel Kinematics Achieving Desired Motion/Force Transmission Characteristics

2010 ◽  
Vol 132 (2) ◽  
Author(s):  
Xin-Jun Liu ◽  
Li-Ping Wang ◽  
Fugui Xie ◽  
Ilian A. Bonev
Keyword(s):  
Parallel Kinematics ◽  
Force Transmission ◽  
Spherical Joint ◽  
Transmission Characteristics ◽  
Design Issue ◽  
Transmission Capability ◽  
High Orientation ◽  
Dimensional Optimization

This paper addresses the design issue of a three-axis tool head with three-PRS parallel kinematics (P, R, and S standing for prismatic, revolute, and spherical joint, respectively) by considering their orientation capability and motion/force transmission. The content presented here is actually an improvement on the dimensional optimization of articulated tool heads with parallel kinematics, with emphasis on the three-PRS design to solve the problem of orientational capability. An index that can evaluate the effectiveness of the motion/force transmission is introduced. The orientation capability with which the mechanism has high motion/force transmission capability is then defined. The procedure searching the link lengths with which the mechanism has a high orientation capability and good effectiveness of motion/force transmission is finally presented.

Sign in / Sign up

Export Citation Format

Share Document