Rheological properties of bentonite-free water-based drilling fluids with novel polymer viscosifier

2018 ◽  
Vol 164 ◽  
pp. 302-310 ◽  
Author(s):  
Binqiang Xie ◽  
Li Ting ◽  
Yan Zhang ◽  
Chen Liu
Keyword(s):  
Rheological Properties ◽  
Free Water ◽  
Drilling Fluids ◽  
Water Based

scholarly journals Carboxylated Cellulose Nanocrystals as Environmental-Friendly and Multi-Functional Additives for Bentonite Water-Based Drilling Fluids Under High-temperature Conditions

2021 ◽  
Author(s):  
Xinliang Li ◽  
Kai Wang
Keyword(s):  
Rheological Properties ◽  
Cellulose Nanocrystals ◽  
Colloidal Stability ◽  
Free Water ◽  
Environmentally Friendly ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Gas Drilling ◽  
Water Based ◽  
Gel Network

Abstract During the oil and gas drilling engineering, the selection of drilling fluids must take account of the technical and environmental factors. This study investigated the effectiveness of carboxylated cellulose nanocrystals (denoted as CNCs) as environmentally friendly additives in improving the rheological, filtration, and inhibitive performances of bentonite (BT) water-based drilling fluids (WBDFs). CNCs used in this study were modified by carboxylation reaction, displaying small size, negative surface charge, good colloidal stability, and prominent shear thinning behavior. The experimental results indicated that BT/CNC suspensions had superior rheological properties, low fluid loss volumes, and effective inhibition, even at 140 °C. Microstructure analysis demonstrated that CNCs could attach to the surface of BT via hydrogen bond and ionic bond. CNCs, BT, and vicinal water molecules could form a stiff gel network, which had a strong resistance to flow under shear force, leading to a significant improvement in the rheological properties. Moreover, under the differential pressure, BT/CNC suspensions formed thin and less hydrophilic filter cakes with compact layered structure, thereby efficiently decreasing the fluid loss volume. Finally, due to the gel network and filtration ability, BT/CNC suspensions performed low water activity, which was beneficial for preventing the penetration of free water into the shales and borehole well. Thus CNCs also exerted satisfactory inhibition on hydration and dispersion of BT and shales. As a result, CNCs showed great potential to be used as efficient, multi-functional, and environmentally friendly additives in WBDFs.

scholarly journals Investigation of regulating rheological properties of water-based drilling fluids by ultrasound

2021 ◽  
Author(s):  
Wei-An Huang ◽  
Jing-Wen Wang ◽  
Ming Lei ◽  
Gong-Rang Li ◽  
Zhi-Feng Duan ◽  
...  
Keyword(s):  
Rheological Properties ◽  
Drilling Fluids ◽  
Water Based

Annular Frictional Pressure Losses During Drilling—Predicting the Effect of Drillstring Rotation

2014 ◽  
Vol 136 (3) ◽  
Author(s):  
Arild Saasen
Keyword(s):  
Rheological Properties ◽  
Pressure Loss ◽  
Drilling Fluid ◽  
Axial Flow ◽  
Drilling Fluids ◽  
Unstable Flow ◽  
Pressure Losses ◽  
Shear Dependent Viscosity ◽  
Water Based ◽  
Dependent Viscosity

Controlling the annular frictional pressure losses is important in order to drill safely with overpressure without fracturing the formation. To predict these pressure losses, however, is not straightforward. First of all, the pressure losses depend on the annulus eccentricity. Moving the drillstring to the wall generates a wider flow channel in part of the annulus which reduces the frictional pressure losses significantly. The drillstring motion itself also affects the pressure loss significantly. The drillstring rotation, even for fairly small rotation rates, creates unstable flow and sometimes turbulence in the annulus even without axial flow. Transversal motion of the drillstring creates vortices that destabilize the flow. Consequently, the annular frictional pressure loss is increased even though the drilling fluid becomes thinner because of added shear rate. Naturally, the rheological properties of the drilling fluid play an important role. These rheological properties include more properties than the viscosity as measured by API procedures. It is impossible to use the same frictional pressure loss model for water based and oil based drilling fluids even if their viscosity profile is equal because of the different ways these fluids build viscosity. Water based drilling fluids are normally constructed as a polymer solution while the oil based are combinations of emulsions and dispersions. Furthermore, within both water based and oil based drilling fluids there are functional differences. These differences may be sufficiently large to require different models for two water based drilling fluids built with different types of polymers. In addition to these phenomena washouts and tool joints will create localised pressure losses. These localised pressure losses will again be coupled with the rheological properties of the drilling fluids. In this paper, all the above mentioned phenomena and their consequences for annular pressure losses will be discussed in detail. North Sea field data is used as an example. It is not straightforward to build general annular pressure loss models. This argument is based on flow stability analysis and the consequences of using drilling fluids with different rheological properties. These different rheological properties include shear dependent viscosity, elongational viscosity and other viscoelastic properties.

Method and Mechanism of Regulating Rheological Properties of Water-Based Drilling Fluid by High-Frequency and High-Voltage Alternating Current Electric Field

SPE Journal ◽  
2020 ◽  
Vol 25 (05) ◽  
pp. 2220-2233
Author(s):  
Weian Huang ◽  
Ming Lei ◽  
Jingwen Wang ◽  
Kaihe Lv ◽  
Lin Jiang ◽  
...  
Keyword(s):  
Electric Field ◽  
Rheological Properties ◽  
High Voltage ◽  
High Frequency ◽  
Pulse Width ◽  
Drilling Fluid ◽  
Width Ratio ◽  
Drilling Fluids ◽  
Water Based ◽  
Bentonite Suspension

Summary The rheology of drilling fluid is commonly regulated by chemical methods. In this work, a physical method of a high-frequency and high-voltage alternating current (AC) electric field to regulate the rheological properties of water-based drilling fluid is established. The effects of the electric field on the continuous phase and dispersed phase, as well as two kinds of water-based drilling fluids, were investigated, and the response relationship among rheological properties modeled by Bingham and Herschel-Bulkley (H-B) models and electric-field parameters was explored. Results showed that water conductivity increased when voltage reached 4 kV, whereas it was restored to the original state after 3 hours in the absence of an electric field, showing a memory effect. The effect was also observed on bentonite suspension, whose plastic viscosity increased with the aid of an electric field and decreased over time. Voltage showed the greatest effect on bentonite-suspension viscosity, followed by frequency and pulse-width ratio. Under the condition of voltage of 5 kV, frequency of 5 kHz, and pulse-width ratio of 80%, there was a maximum increase of 50% in viscosity. The addition of salts caused bentonite-suspension flocculation, and electric field reduced the consistency coefficient and relieved flocculation state. When polymers were incorporated in bentonite suspension, the electric field could decrease the adsorption amount between clay particles and polymeric additives such as amphoteric and acrylamide-based polymers. For two typical drilling fluids, the voltage of an introduced electric field was the main controlling factor to change the rheological properties; their plastic viscosity and consistency coefficient both started to increase when voltage reached 4 kV.

A Brief Introduction to High Temperature and Foam Free Water Based Drilling Fluids

2016 ◽  
Author(s):  
Mojtaba Kalhor Mojammadi ◽  
Shervin Taraghikhah ◽  
Koroush Tahmasbi Nowtaraki
Keyword(s):  
High Temperature ◽  
Free Water ◽  
Drilling Fluids ◽  
Water Based

Rheological Properties of Barite Sediments in Water-Based Drilling Fluids

2018 ◽  
Author(s):  
Torbjørn Vrålstad ◽  
Ragnhild Skorpa ◽  
Arild Saasen
Keyword(s):  
Rheological Properties ◽  
Drilling Fluid ◽  
Gravity Separation ◽  
Drilling Fluids ◽  
Water Based ◽  
Different Types ◽  
Preliminary Study ◽  
Well Abandonment

When a drilling fluid column remains static over a timeframe of several years, the drilling fluid separates into different sediment phases due to gravity separation. These heavy sediments, entitled “settled barite”, are the cause of significant operational problems several years after drilling. An important problem caused by settled barite occurs when performing casing cut-and-pull operations during slot recovery and well abandonment: the casing is “stuck” due to the sediments in the annulus outside the casing. The consistency and rheological properties of the sediments determine how easily the casing is removed. In this paper, we report a preliminary study were we have artificially prepared gravity sediment phases for two different types of water-based drilling fluids; one KCl/polymer-based fluid and one bentonite-based fluid. By studying the rheological properties of the obtained sediment phases, we see that there are considerable differences between the sediments for these different drilling fluids.

Are the rheological properties of water-based and synthetic drilling fluids obtained by the Fann 35A viscometer reliable?

2019 ◽  
Vol 177 ◽  
pp. 872-879 ◽  
Author(s):  
Rubens Rosario Fernandes ◽  
Guilherme Turezo ◽  
Diogo E.V. Andrade ◽  
Admilson T. Franco ◽  
Cezar Otaviano Ribeiro Negrão
Keyword(s):  
Rheological Properties ◽  
Drilling Fluids ◽  
Water Based
Sign in / Sign up

Export Citation Format

Share Document