Highly transparent and resilient urethane-methacrylate siloxane composite for hard, yet stretchable protective coating

2022 ◽  
Vol 162 ◽  
pp. 106567
Author(s):  
Hyunhwan Lee ◽  
Seungwan Kim ◽  
Wonsik Kim ◽  
Seung-Mo Kang ◽  
Yun Hyeok Kim ◽  
...  
Keyword(s):  
Protective Coating

CAD Of Anticorrosive Protection Of Steel Structures

2019 ◽  
pp. 18-23
Keyword(s):  
Protective Coating ◽  
Computer Aided Design ◽  
Steel Structures ◽  
Cost Effective ◽  
Operating Conditions ◽  
Computational Tool ◽  
Protection Method ◽  
Cost Effective Method ◽  
The Cost ◽  
Aided Design

The choice of cost-effective method of anticorrosive protection of steel structures is an urgent and time consuming task, considering the significant number of protection ways, differing from each other in the complex of technological, physical, chemical and economic characteristics. To reduce the complexity of solving this problem, the author proposes a computational tool that can be considered as a subsystem of computer-aided design and used at the stage of variant and detailed design of steel structures. As a criterion of the effectiveness of the anti-corrosion protection method, the cost of the protective coating during the service life is accepted. The analysis of existing methods of steel protection against corrosion is performed, the possibility of their use for the protection of the most common steel structures is established, as well as the estimated period of effective operation of the coating. The developed computational tool makes it possible to choose the best method of protection of steel structures against corrosion, taking into account the operating conditions of the protected structure and the possibility of using a protective coating.

Periphyton Development on the Protective Coating, Modifiedby the Cation Biocide

2020 ◽  
Vol 56 (1) ◽  
pp. 57-69
Author(s):  
S. P. Rogalskiy ◽  
I. A. Morozovskaya ◽  
M. A. Boretskaya ◽  
T. V. Cherniavskaya ◽  
O. P. Tarasiuk ◽  
...  
Keyword(s):  
Protective Coating

Study of the character and causes of destruction of the cardan shaft of the propeller engine

2019 ◽  
Vol 85 (12) ◽  
pp. 43-50
Author(s):  
D. A. Movenko ◽  
L. V. Morozova ◽  
S. V. Shurtakov
Keyword(s):  
Mechanical Properties ◽  
Chemical Composition ◽  
Yield Point ◽  
Protective Coating ◽  
Fracture Pattern ◽  
Corrosion Cracking ◽  
Tempered Martensite ◽  
Neck Formation ◽  
Static Mechanism ◽  
Shaft Surface

The results of studying operational destruction of a high-loaded cardan shaft of the propeller engine made of steel 38KhN3MFA are presented to elucidate the cause of damage and develop a set of recommendations and measures aimed at elimination of adverse factors. Methods of scanning electron and optical microscopy, as well as X-ray spectral microanalysis are used to determine the mechanical properties, chemical composition, microstructure, and fracture pattern of cardan shaft fragments. It is shown that the mechanical properties and chemical composition of the material correspond to the requirements of the regulatory documentation, defects of metallurgical origin both in the shaft metal and in the fractures are absent. The microstructure of the studied shaft fragments is tempered martensite. Fractographic analysis revealed that the destruction of cardan shaft occurred by a static mechanism. The fracture surface is coated with corrosion products. The revealed cracks developed by the mechanism of corrosion cracking due to violation of the protective coating on the shaft. The results of the study showed that the destruction of the cardan shaft of a propeller engine made of steel 38Kh3MFA occurred due to formation and development of spiral cracks by the mechanism of stress corrosion cracking under loads below the yield point of steel. The reason for «neck» formation upon destruction of the shaft fragment is attributed to the yield point of steel attained during operation. Regular preventive inspections are recommended to assess the safety of the protective coating on the shaft surface to exclude formation and development of corrosion cracks.

scholarly journals Carrier-microencapsulation using Al-catecholate complex to suppress arsenopyrite oxidation: Evaluation of the coating stability under simulated weathering conditions

2019 ◽  
Vol 268 ◽  
pp. 06002 ◽  
Author(s):  
Kensuke Seno ◽  
Ilhwan Park ◽  
Carlito Tabelin ◽  
Kagehiro Magaribuchi ◽  
Mayumi Ito ◽  
...  
Keyword(s):  
Protective Coating ◽  
Sulfide Mineral ◽  
Sulfide Minerals ◽  
Low Ph ◽  
Oxidation Products ◽  
Arsenic Sulfide ◽  
Catecholate Complex ◽  
Coating Stability ◽  
The Stability

Arsenopyrite (FeAsS) is the most common primary arsenic-sulfide mineral in nature, and its oxidation causes the release of toxic arsenic (As). To mitigate these problems, carrier-microencapsulation (CME), a technique that passivates sulfide minerals by covering their surfaces with a protective coating, has been developed. In the previous study of authors on CME, Al-catecholate complex significantly suppressed arsenopyrite oxidation via electron donating effects of the complex and the formation of an Al-oxyhydroxide coating. For the application of this technique to real tailings, however, further study should be carried out to elucidate long-term effectiveness of the coating to suppress arsenopyrite oxidation. This study investigates the stability of the coating formed on arsenopyrite by Al-based CME using weathering tests. The Al-oxyhydroxide coating suppressed arsenopyrite oxidation until about 50 days of the experiment, but after this, the amounts of oxidation products like dissolved S and As increased due to the gradual dissolution of the coating with time as a result of the low pH of leachate. This suggests that co-disposal of Al-based CME-treated arsenopyrite with minerals that have appropriate neutralization potentials, so that the pH is maintained at around 5 to 8 where Al-oxyhydroxide is stable.

SiC whisker-toughened SiC oxidation protective coating for carbon/carbon composites

Carbon ◽  
2006 ◽  
Vol 44 (3) ◽  
pp. 602-605 ◽  
Author(s):  
He-Jun Li ◽  
Qian-Gang Fu ◽  
Xiao-Hong Shi ◽  
Ke-Zhi Li ◽  
Zhi-Biao Hu
Keyword(s):  
Protective Coating ◽  
Carbon Composites
Sign in / Sign up

Export Citation Format

Share Document