Experimental investigation of the effective electrical conductivity of aluminum oxide nanofluids

2009 ◽  
Vol 196 (3) ◽  
pp. 326-330 ◽  
Author(s):  
Suvankar Ganguly ◽  
Sudipta Sikdar ◽  
Somnath Basu
Geophysics ◽  
2021 ◽  
pp. 1-58
Author(s):  
Hang Chen ◽  
Qifei Niu

Many electrical and electromagnetic (EM) methods operate at MHz frequencies, at which the interfacial polarization occurring at the solid-liquid interface in geologic materials may dominate the electrical signals. To correctly interpret electrical/EM measurements, it is therefore critical to understand how the interfacial polarization influences the effective electrical conductivity and permittivity spectra of geologic materials. We have used pore-scale simulation to study the role of material texture and packing in interfacial polarization in water-saturated granular soils. Synthetic samples with varying material textures and packing densities are prepared with the discrete element method. The effective electrical conductivity and permittivity spectra of these samples are determined by numerically solving the Laplace equation in a representative elementary volume of the samples. The numerical results indicate that the effective permittivity of granular soils increases as the frequency decreases due to the polarizability enhancement from the interfacial polarization. The induced permittivity increment is mainly influenced by the packing state of the samples, increasing with the packing density. Material textures such as the grain shape and size distribution may also affect the permittivity increment, but their effects are less significant. The frequency characterizing the interfacial polarization (i.e., the characteristic frequency) is mainly related to the electrical contrast of the solid and water phases. The model based on the traditional differential effective medium (DEM) theory significantly underestimates the permittivity increment by a factor of more than two and overestimates the characteristic frequency by approximately 1 MHz. These inaccurate predictions are due to the fact that the electrical interactions between neighboring grains are not considered in the DEM theory. A simple empirical equation is suggested to scale up the theoretical depolarization factor of grains entering the DEM theory to account for the interaction of neighboring grains in granular soils.


2004 ◽  
Vol 449-452 ◽  
pp. 233-236 ◽  
Author(s):  
Jun Suh Yu ◽  
B.S. Lee ◽  
Sung Churl Choi ◽  
Ji Hun Oh ◽  
Jae Chun Lee

Electrically conductive porous Si/SiC fiber media were prepared by infiltration of liquid silicon into porous carbon fiber preforms. The series rule of mixture for the effective electrical conductivity was applied to the disc shaped samples to estimate their silicon content, effective electrical conductivity and porosity. The electrical conductivity was estimated by assuming the disc sample as a plate of equivalent geometry, i.e., same thickness, electrode distance and volume. As the volumetric content of silicon in a sample increases from 0.026% to 0.97%, the estimated electrical conductivity increases from 0.17 S/cm to 2.09 S/cm. The porosity of the samples measured by Archimedes principle was in the range of 75~83% and 1~4% less than the one estimated by the series rule of mixture for the effective electrical conductivity.


Author(s):  
Gary D. Seidel ◽  
Kelli L. Boehringer ◽  
Dimitris C. Lagoudas

In the present work, computational micromechanics techniques are applied towards predicting the effective electrical conductivities of polymer nanocomposites containing aligned bundles of SWCNTs at wide range of volume fractions. Periodic arrangements of well-dispersed and clustered/bundled SWCNTs are studied using the commercially available finite element software COMSOL Multiphysics 3.4. The volume averaged electric field and electric flux obtained are used to calculate the effective electrical conductivity of nanocomposites in both cases, therefore indicating the influence of clustering on the effective electrical conductivity. In addition, the influence of the presence of an interphase region on the effective electrical conductivity is considered in a parametric study in terms of both interphase thickness and conductivity for both the well dispersed case and for the clustered arrangements. Comparing the well-dispersed case with an interphase layer to the same arrangement without the interphase layer allows for the assessment of the influence of the interphase layer on the effective electrical conductivities, while similar comparisons for the clustered arrangements yield information about the combined effects of clustering and interphase regions. Initial results indicate that there is very little influence of the interphase layer on the effective conductivity prior to what is identified as the interphase percolation concentration, and that there is an appreciable combined effect of clustering in the presence of interphase regions which leads to increases in conductivity larger than the sum of the two effects independently.


1995 ◽  
Vol 117 (2) ◽  
pp. 160-168 ◽  
Author(s):  
S. Kohli ◽  
C. Guo ◽  
S. Malkin

An experimental investigation is reported of the energy partition to the workpiece for grinding of steels with aluminum oxide and cubic boron nitride (CBN) abrasive wheels. The energy input to the workpiece was obtained by measuring the temperature distribution in the workpiece using an embedded thermocouple technique and matching the results with analytically computed values. It was found that 60-75 percent of the grinding energy is transported to the workpiece as heat with an aluminum oxide abrasive wheel, as compared to only about 20 percent with CBN wheels. An analysis of the results indicates that the much lower energy partition to the workpiece with CBN can be attributed to its very high thermal conductivity whereby a significant portion of the grinding heat is transported to the abrasive instead of to the workpiece. The much lower energy partition to the workpiece with CBN wheels results in much lower grinding temperatures and a greatly reduced tendency for thermal damage to the workpiece.


2016 ◽  
Vol 51 (21) ◽  
pp. 2979-2988 ◽  
Author(s):  
Vladimir Kulakov ◽  
Andrey Aniskevich ◽  
Sergey Ivanov ◽  
Triinu Poltimae ◽  
Olesja Starkova

Sign in / Sign up

Export Citation Format

Share Document