scholarly journals On the fatigue behavior of notched structural adhesives with considerations of mechanical properties and stress concentration effects

2018 ◽  
Vol 213 ◽  
pp. 459-469 ◽  
Author(s):  
Vinicius Carrillo Beber ◽  
Bernhard Schneider ◽  
Markus Brede
Keyword(s):  
Mechanical Properties ◽  
Stress Concentration ◽  
Fatigue Behavior ◽  
Concentration Effects ◽  
Structural Adhesives

The Porosity Dependence of Mechanical and other Properties of Materials

1990 ◽  
Vol 207 ◽  
Author(s):  
Roy W. Rice ◽  
W. R. Grace
Keyword(s):  
Mechanical Properties ◽  
Stress Concentration ◽  
Cross Sections ◽  
Volume Fraction ◽  
Pore Shape ◽  
Concentration Effects ◽  
Porosity Dependence ◽  
Different Types ◽  
Properties Of Materials ◽  
Solid Area

AbstractThough the volume fraction (or %) porosity is commonly used as the exclusive porosity variable to describe the porosity dependence of physical properties, it is not sufficient. The average minimum solid area, i.e., of the bond or sintered area between sintering particles, or the minimum web or strut cross-sections is the most appropriate second porosity parameter. Pore shape-stress concentration effects have, at best, limited direct effect on mechanical properties, but generally correlate with minimum solid area effects. Methods of combining effects of different types of porosity within the same body are important and result in quite reasonable descriptions of mechanical properties across a broad range of porosities.

Mechanical properties and fatigue behavior of CO2 laser beam welded armor steel joints

2020 ◽  
Vol 62 (7) ◽  
pp. 689-697
Author(s):  
Zulkuf Balalan ◽  
Furkan Sarsilmaz ◽  
Omer Ekinci
Keyword(s):  
Mechanical Properties ◽  
Laser Beam ◽  
Co2 Laser ◽  
Fatigue Behavior ◽  
Armor Steel ◽  
Steel Joints

Mechanical Properties of SiO2 vs. SiO2-TiO2 Bulk Glasses and Fibers

1991 ◽  
Vol 244 ◽  
Author(s):  
Suresh T. Gulati
Keyword(s):  
Mechanical Properties ◽  
Optical Fibers ◽  
Mechanical Performance ◽  
Fatigue Behavior ◽  
Deformation Mode ◽  
Strength Distribution ◽  
Fused Silica ◽  
Space Applications ◽  
Silica Glasses ◽  
Silica And Titania

ABSTRACTThe mechanical properties of silica and titania-doped silica glasses, in bulk and fiber forms, are presented. These include the elastic properties (E and ν), strength distribution (in tension and bending), fatigue behavior (dynamic and static loading) and fracture toughness. Following a brief review of above properties for fused silica and ULE™ glasses (Coming Codes 7940 and 7971), used primarily for space applications, the mechanical properties data for silica and titania-doped silica-clad optical fibers are presented. The enhancement of mechanical performance of titania-doped silica clad fiber is also discussed.The effect of titania doping on fundamental properties like stress-free activation energy, crack tip pH, and deformation mode of Si-O-Si bond is discussed. In addition, the crack velocity data obtained from DCDC specimens of homogeneous silica and titania-doped silica glasses are compared in an attempt to understand the role titania plays in improving the fatigue resistance of optical fibers.

scholarly journals Changing in Fatigue Life of 300 M Bainitic Steel After Laser Carburizing and Plasma Nitriding

2018 ◽  
Vol 165 ◽  
pp. 21002 ◽  
Author(s):  
Antonio J. Abdalla ◽  
Douglas Santos ◽  
Getúlio Vasconcelos ◽  
Vladimir H. Baggio-Scheid ◽  
Deivid F. Silva
Keyword(s):  
Mechanical Properties ◽  
Fatigue Life ◽  
Plasma Nitriding ◽  
Fatigue Behavior ◽  
High Strength ◽  
Tensile Tests ◽  
Steel Sample ◽  
Fatigue Tests ◽  
300M Steel ◽  
Structural Applications

In this work 300M steel samples is used. This high-strength steel is used in aeronautic and aerospace industry and other structural applications. Initially the 300 M steel sample was submitted to a heat treatment to obtain a bainític structure. It was heated at 850 °C for 30 minutes and after that, cooled at 300 °C for 60 minutes. Afterwards two types of surface treatments have been employed: (a) using low-power laser CO2 (125 W) for introducing carbon into the surface and (b) plasma nitriding at a temperature of 500° C for 3 hours. After surface treatment, the metallographic preparation was carried out and the observations with optical and electronic microscopy have been made. The analysis of the coating showed an increase in the hardness of layer formed on the surface, mainly, among the nitriding layers. The mechanical properties were analyzed using tensile and fatigue tests. The results showed that the mechanical properties in tensile tests were strongly affected by the bainitic microstructure. The steel that received the nitriding surface by plasma treatment showed better fatigue behavior. The results are very promising because the layer formed on steel surface, in addition to improving the fatigue life, still improves protection against corrosion and wear.

Fatigue Behavior of Circumferentially Notched Round Bars of Austenitic Stainless Steel Under Torsional and Axial Loads

2010 ◽  
Author(s):  
Masao Itatani ◽  
Keisuke Tanaka ◽  
Isao Ohkawa ◽  
Takehisa Yamada ◽  
Toshiyuki Saito
Keyword(s):  
Fatigue Life ◽  
Stress Concentration ◽  
Crack Initiation ◽  
Crack Propagation ◽  
Fatigue Behavior ◽  
Fatigue Crack Initiation ◽  
Static Tension ◽  
Cyclic Torsion ◽  
Cyclic Tension ◽  
Crack Initiation Life

Fatigue tests of smooth and notched round bars of austenitic stainless steels SUS316NG and SUS316L were conducted under cyclic tension and cyclic torsion with and without static tension. Fatigue strength under fully reversed (R=−1) cyclic tension once increased with increasing stress concentration factor up to Kt=1.5, but it decreased from Kt=1.5 to 2.5. Fatigue life increased with increasing stress concentration under pure cyclic torsion, while it decreased with increasing stress concentration under cyclic torsion with static tension. From the measurement of fatigue crack initiation and propagation lives using electric potential drop method, it was found that the crack initiation life decreased with increasing stress concentration and the crack propagation life increased with increasing stress concentration under pure cyclic torsion. Under cyclic torsion with static tension, the crack initiation life also decreased with increasing stress concentration but the crack propagation life decreased or not changed with increasing stress concentration then the total fatigue life of sharper notched specimen decreased. It was also found that the fatigue life of smooth specimen under cyclic torsion with static tension was longer than that under pure cyclic torsion. This behavior could be explained based on the cyclic strain hardening under non-proportional loading and the difference in crack path with and without static tension.

Development of a High Strength Mg-Zn-Y-Zr Wrought Alloy

2007 ◽  
Vol 539-543 ◽  
pp. 1701-1706
Author(s):  
Rong Shi Chen ◽  
Wei Neng Tang ◽  
Dao Kui Xu ◽  
En Hou Han
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Fatigue Life ◽  
Deformation Behavior ◽  
Fatigue Behavior ◽  
High Strength ◽  
Zn Content ◽  
High Fatigue ◽  
Content Range ◽  
Zr Alloy

The effects of Y addition to the Mg-Zn-Y-Zr alloy on the change of the microstructure and the mechanical properties (with the Y content range of 1 to 3 wt%) have been investigated. It shows that when Zn content is constant (5.65wt%), the alloys with Y content between 1.17 and 1.72wt% nearly reach its highest strength. With the composition near the optimums, the extruded Mg-6%Zn-1%Y-Zr alloy shows high strength and excellent ductility. The deformation behavior of this new alloy at high temperature has also been studied. Moreover, the super-long fatigue behavior of the Mg-6%Zn-1%Y-Zr alloy has also been tested, the results show the alloy with a high fatigue strength of about 85-90MPa in the super-long fatigue life regime of 1×109 cycles.

Simulation of Mechanical Properties of Aluminum Based on Micro Model

2013 ◽  
Vol 347-350 ◽  
pp. 1132-1138 ◽  
Author(s):  
Hai Dong Wang ◽  
Xu Liu ◽  
Gui Xue Bian ◽  
Li Xu ◽  
Shi Zhao
Keyword(s):  
Mechanical Properties ◽  
Stress Concentration ◽  
Elastic Constants ◽  
Driving Force ◽  
Metals And Alloys ◽  
Zone Model ◽  
Micro Model ◽  
Cohesion Zone ◽  
Metal Aluminum ◽  
Relationship Of

Elastic constants of purity and containing impurity metal aluminum were calculated, and the effects of impurity on the elastic constants were also studied. The effect of particle on micro-stress concentration and debonded stress of inclusion was researched. The mechanical relationship between the grains was defined by relationship of displacement and driving force in cohesion zone model (CZM).The method can be extended to research mechanical properties of other metals and alloys structures.

Sign in / Sign up

Export Citation Format

Share Document