scholarly journals Environmental and economic assessment of food-packaging systems with a focus on food waste. Case study on tomato ketchup

2020 ◽  
Vol 738 ◽  
pp. 139846 ◽  
Author(s):  
Bernhard Wohner ◽  
Viktoria Helene Gabriel ◽  
Barbara Krenn ◽  
Victoria Krauter ◽  
Manfred Tacker
TAPPI Journal ◽  
2012 ◽  
Vol 11 (8) ◽  
pp. 17-24 ◽  
Author(s):  
HAKIM GHEZZAZ ◽  
LUC PELLETIER ◽  
PAUL R. STUART

The evaluation and process risk assessment of (a) lignin precipitation from black liquor, and (b) the near-neutral hemicellulose pre-extraction for recovery boiler debottlenecking in an existing pulp mill is presented in Part I of this paper, which was published in the July 2012 issue of TAPPI Journal. In Part II, the economic assessment of the two biorefinery process options is presented and interpreted. A mill process model was developed using WinGEMS software and used for calculating the mass and energy balances. Investment costs, operating costs, and profitability of the two biorefinery options have been calculated using standard cost estimation methods. The results show that the two biorefinery options are profitable for the case study mill and effective at process debottlenecking. The after-tax internal rate of return (IRR) of the lignin precipitation process option was estimated to be 95%, while that of the hemicellulose pre-extraction process option was 28%. Sensitivity analysis showed that the after tax-IRR of the lignin precipitation process remains higher than that of the hemicellulose pre-extraction process option, for all changes in the selected sensitivity parameters. If we consider the after-tax IRR, as well as capital cost, as selection criteria, the results show that for the case study mill, the lignin precipitation process is more promising than the near-neutral hemicellulose pre-extraction process. However, the comparison between the two biorefinery options should include long-term evaluation criteria. The potential of high value-added products that could be produced from lignin in the case of the lignin precipitation process, or from ethanol and acetic acid in the case of the hemicellulose pre-extraction process, should also be considered in the selection of the most promising process option.


Author(s):  
Mohamed ElFetyany ◽  
Rokaia Kamal ◽  
Mohamed Helmy ◽  
Mohamed Lotfy Nasr

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1172
Author(s):  
Hafiz Haq ◽  
Petri Välisuo ◽  
Seppo Niemi

Industrial symbiosis networks conventionally provide economic and environmental benefits to participating industries. However, most studies have failed to quantify waste management solutions and identify network connections in addition to methodological variation of assessments. This study provides a comprehensive model to conduct sustainable study of industrial symbiosis, which includes identification of network connections, life cycle assessment of materials, economic assessment, and environmental performance using standard guidelines from the literature. Additionally, a case study of industrial symbiosis network from Sodankylä region of Finland is implemented. Results projected an estimated life cycle cost of €115.20 million. The symbiotic environment would save €6.42 million in waste management cost to the business participants in addition to the projected environmental impact of 0.95 million tonne of CO2, 339.80 tonne of CH4, and 18.20 tonne of N2O. The potential of further cost saving with presented optimal assessment in the current architecture is forecast at €0.63 million every year.


2020 ◽  
Vol 261 ◽  
pp. 121220 ◽  
Author(s):  
Zi Xiang Keng ◽  
Siewhui Chong ◽  
Chee Guan Ng ◽  
Nur Izzati Ridzuan ◽  
Svenja Hanson ◽  
...  

2021 ◽  
Vol 13 (14) ◽  
pp. 7667
Author(s):  
Lusine H. Aramyan ◽  
Gonne Beekman ◽  
Joris Galama ◽  
Sandra van der Haar ◽  
Maarten Visscher ◽  
...  

For a transition to a circular economy to take place, behavioural change from people who are part of the transition is a key requirement. However, this change often does not occur by itself. For systemic behavioural change, policy instruments that incentivise behaviour supporting circular food systems play a key role. These instruments need to be aligned with the environment in which the behaviour takes place. In this study, we scrutinise a case study with five initiatives on the reduction of food loss and waste (FLW) contributing to a circular food system, to understand how specific, well-targeted combinations of instruments as well as other contextual and personal factors can fuel the transition to a circular economy and the reduction of FLW. All the initiatives are taking place under the umbrella of the Dutch initiative “United against food waste” (STV). We use a behavioural change perspective to assess how initiatives that support circular food systems arise and how they can be further supported. Based on the case-study analysis, we arrive at five common success traits and barriers, and five key needs for upscaling. We conclude that motivated, inspiring frontrunners are of key importance in the initial phase of a transition process. However, once a niche initiative is ready to be scaled up, the enabling environment becomes increasingly important.


2021 ◽  
Vol 13 (1) ◽  
pp. 421
Author(s):  
Marzena Tomaszewska ◽  
Beata Bilska ◽  
Agnieszka Tul-Krzyszczuk ◽  
Danuta Kołożyn-Krajewska

The problem of food waste in food services, which is global and essentially affects the entire world, is a major challenge for the hospitality industry. At the same time, it should be noted that this problem has not been sufficiently studied, which makes it difficult to reduce it effectively. The study was carried out in four hotels in late 2019 and early 2020. In order to determine the scale of food waste, the diary method was used, which consists of systematically recording, for seven days, in forms prepared for workstations, the weight of all food products and unused food, including the stage of the technological process. In the hotels under study, most food was wasted in the serving department, i.e., in the buffet in the dining room or in the form of plate waste (on average 72.55% of wasted food). After taking into account the number of hotel guests served, it was found that in the investigated facilities, an average of 0.046 kg was wasted from each serving offered to guests in the form of plate waste, which constituted 5.8% of its weight. In sum, it should be stated that in order to reduce food waste, it is necessary to educate both food services staff and consumers. Employees should be trained in the proper handling of food. Consumer education, on the other hand, should be directed toward raising awareness of the negative impact of food waste, such as that on the natural environment. In addition, it should indicate what action everyone can take to limit this negative phenomenon, whether at home, in the workplace, or in a food service establishment.


2021 ◽  
Vol 13 (8) ◽  
pp. 4486
Author(s):  
Antonella Cammarelle ◽  
Rosaria Viscecchia ◽  
Francesco Bimbo

Innovations in food packaging, such as active and intelligent ones, improve food safety and lower household food waste by extending product shelf life and providing information about food quality, respectively. The consumer adoption of such innovations could contribute to reaching one of the Sustainable Development Goals which calls for halving the per capita global food waste by 2030. Thus, this paper aims to investigate the consumers’ willingness to purchase active and intelligent packaging to reduce household food waste using a sample of 260 Italian consumers and a modified Theory of Planned Behavior (TPB) model. Using a structural equation model, findings show that respondents are more willing to purchase intelligent packaging rather than active packaging to reduce their wastes at home. Finally, attitudes, perceived behavioral control, awareness, and planning routines are the most important drivers of the intention to reduce household food waste.


Sign in / Sign up

Export Citation Format

Share Document