Abstract. Properties of atmospheric black carbon (BC) particles were characterized during a field experiment at a rural background site (Melpitz, Germany) in February 2017. BC absorption at a wavelength of 870 nm was measured by a photoacoustic extinctiometer and BC physical properties (BC mass concentration, core size distribution and coating thickness) were measured by a single-particle soot photometer (SP2). Additionally, a catalytic stripper was used to intermittently remove BC coatings by alternating between ambient and thermo-denuded conditions. From these data the mass absorption cross section of BC (MACBC) and its enhancement factor (EMAC) were inferred. Two methods were applied independently to investigate the coating effect on EMAC: a correlation method (ambient MACBC vs. BC coating thickness) and a denuding method (MACBC,amb vs. MACBC,denuded). Observed EMAC values varied from 1.0 to 1.6 (lower limit from denuding method) or ~ 1.2 to 1.9 (higher limit from correlation method) with the mean coating volume fraction ranging from 54 to 78 % in the dominating mass equivalent BC core diameter range of 200–220 nm. MACBC and EMAC were strongly correlated with coating thickness of BC, while other factors were found to have a potential minor influence as well, including air mass origins (different BC sources), mixing morphology (ratio of inorganics to organics), BC core size distribution and absorption Ångström exponent (AAE). These results for ambient BC measured at Melpitz during winter show that the lensing effect caused by coatings on BC is the main driver of the variations in MACBC and EMAC, while changes in other BC particle properties such as source, BC core size or coating composition play only minor roles.
Corrigendum to “Mass absorption cross-section and absorption enhancement from long term black and elemental carbon measurements: A rural background station in Central Europe” [Sci. Total Environ. 794, (10 November 2021), 148365]
