Working fluid selection for regenerative supercritical Brayton cycle combined with bottoming ORC driven by molten salt solar power tower using energy–exergy analysis

The aim of this study was to conduct thermodynamic and economic analyses of a concentrated solar power (CSP) plant to drive a supercritical CO2 recompression Brayton cycle. The objectives were to assess the system viability in a location of moderate-to-high-temperature solar availability to sCO2 power block during the day and to investigate the role of thermal energy storage with 4, 8, 12, and 16 h of storage to increase the solar share and the yearly energy generating capacity. A case study of system optimization and evaluation is presented in a city in Saudi Arabia (Riyadh). To achieve the highest energy production per unit cost, the heliostat geometry field design integrated with a sCO2 Brayton cycle with a molten-salt thermal energy storage (TES) dispatch system and the corresponding operating parameters are optimized. A solar power tower (SPT) is a type of CSP system that is of particular interest in this research because it can operate at relatively high temperatures. The present SPT-TES field comprises of heliostat field mirrors, a solar tower, a receiver, heat exchangers, and two molten-salt TES tanks. The main thermoeconomic indicators are the capacity factor and the levelized cost of electricity (LCOE). The research findings indicate that SPT-TES with a supercritical CO2 power cycle is economically viable with 12 h thermal storage using molten salt. The results also show that integrating 12 h-TES with an SPT has a high positive impact on the capacity factor of 60% at the optimum LCOE of $0.1078/kW h.

Download Full-text

Analyses of Thermal Performance of Solar Power Tower Station Based on a Supercritical CO2 Brayton Cycle

Journal of Energy Resources Technology ◽

10.1115/1.4045083 ◽

2019 ◽

Vol 142 (3) ◽

Cited By ~ 4

Author(s):

Lijun Fang ◽

Yang Li ◽

Xue Yang ◽

Zeliang Yang

Keyword(s):

Heat Transfer ◽

Thermal Efficiency ◽

Power Plants ◽

Solar Power ◽

Working Fluid ◽

Brayton Cycle ◽

Levelized Cost Of Electricity ◽

Heat Receiver ◽

Overall Performance ◽

Solar Power Tower

Abstract Concentrating solar power (CSP) technology, possessing an inherent capacity to couple with energy storage ideally, attracts a great deal of attention nowadays. However, these power plants with various types of CSP system still cannot compete with the traditional thermal power plants in terms of levelized cost of electricity (LCOE), and their potential for utilizing clear and renewable solar energy cannot be overestimated. To improve the total efficiency of the solar power tower (SPT) plant is the key factor for its development. In this present paper, a SPT plant based on an S-CO2 Brayton cycle (with S-CO2 serving as heat transfer and working fluid) is proposed. A numerical simulation is carried out to calculate the effects of key operating parameters, including power cycle and subsystem parameters, on the overall performance of the SPT plant. The results show that there is an optimum value for the compression ratio for the SPT plant. For the heat receiver, the trends of exergy and thermal efficiency varying with turbine inlet temperature are reversed, because of the significant energy loss caused by high temperature of the surface of the heat receiver. As for the overall performance, the SPT plant proposed in this paper is better than other SPT plants based on a steam Rankine system and an S-CO2 Brayton system with molten salt serving as heat transfer fluid (HTF) operating under the similar condition. Its overall thermal efficiency is 1.04% and 3.42% higher than that of two other SPT plants, respectively.

Download Full-text