Effect of deposition time on the photocatalytic activity of sputtered mixed ZnO–SnO2 thin films under visible light irradiation

2021 ◽  
Vol 340 ◽  
pp. 114487
Author(s):  
I. Riahi ◽  
B. Khalfallah ◽  
F. Chaabouni
RSC Advances ◽  
2015 ◽  
Vol 5 (7) ◽  
pp. 4918-4925 ◽  
Author(s):  
Fan Shen ◽  
Li Zhou ◽  
Jiajia Shi ◽  
Mingyang Xing ◽  
Jinlong Zhang

SiO2/BiOX (X = Cl, Br, I) thin films with layered structures were prepared using a convenient sol–gel method. The films show a high and stable photocatalytic activity under visible-light irradiation.


2012 ◽  
Vol 2012 ◽  
pp. 1-6 ◽  
Author(s):  
Yen-Hua Chen ◽  
Kuo-Jui Tu

Hematite (Fe2O3) thin films with different thicknesses are fabricated by the rf magnetron sputtering deposition. The effects of film thicknesses on the photocatalytic activity of hematite films have been investigated. Hematite films possess a polycrystalline hexagonal structure, and the band gap decreases with an increase of film thickness. Moreover, all hematite films exhibit good photocatalytic ability under visible-light irradiation; the photocatalytic activity of hematite films increases with the increasing film thickness. This is because the hematite film with a thicker thickness has a rougher surface, providing more reaction sites for photocatalysis. Another reason is a lower band gap of a hematite film would generate more electron-hole pairs under visible-light illumination to enhance photocatalytic efficiency. Experimental data are well fitted with Langmuir-Hinshelwood kinetic model. The photocatalytic rate constant of hematite films ranges from 0.052 to 0.068 min-1. This suggests that the hematite film is a superior photocatalyst under visible-light irradiation.


2017 ◽  
Vol 2017 ◽  
pp. 1-6 ◽  
Author(s):  
Hang Nguyen Thai Phung ◽  
Van Nguyen Khanh Tran ◽  
Lam Thanh Nguyen ◽  
Loan Kieu Thi Phan ◽  
Phuong Ai Duong ◽  
...  

MoS2/TiO2 heterostructure thin films were fabricated by sol-gel and chemical bath deposition methods. Crystal structure, surface morphology, chemical states of all elements, and optical property of the obtained thin films were characterized by using X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, and UV-Vis spectroscopy techniques, respectively. Photocatalytic activity of all thin films was evaluated by measuring decomposition rate of methylene blue solution under visible light irradiation. The results indicate that ultrathin MoS2 film on TiO2-glass substrate improves photocatalytic activity of TiO2 in the visible light due to the efficient absorption of visible photon of MoS2 few layers and the transfer of electrons from MoS2 to TiO2. All MoS2/TiO2 heterostructure thin films exhibit higher visible light photocatalytic activity than that of pure MoS2 and TiO2 counterparts. The best MoS2/TiO2 heterostructure thin film at MoS2 layer deposition time of 45 minutes can decompose about 60% MB solution after 150 minutes under visible light irradiation. The mechanism of the enhancement for visible-photocatalytic activity of MoS2/TiO2 heterostructure thin film was also discussed.


2021 ◽  
Vol 50 (9) ◽  
pp. 3253-3260 ◽  
Author(s):  
Shan Zhao ◽  
Junbiao Wu ◽  
Yan Xu ◽  
Xia Zhang ◽  
Yide Han ◽  
...  

CdS/Ag2S/g-C3N4 ternary composites showed excellent photocatalytic performance toward H2 evolution. Their improved photocatalytic activity could be attributed not only to the synergic effect, but also to the introduction of Ag2S.


Sign in / Sign up

Export Citation Format

Share Document