scholarly journals Investigating Visible-Photocatalytic Activity of MoS2/TiO2 Heterostructure Thin Films at Various MoS2 Deposition Times

2017 ◽  
Vol 2017 ◽  
pp. 1-6 ◽  
Author(s):  
Hang Nguyen Thai Phung ◽  
Van Nguyen Khanh Tran ◽  
Lam Thanh Nguyen ◽  
Loan Kieu Thi Phan ◽  
Phuong Ai Duong ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Visible Light Irradiation ◽  
Photoelectron Spectroscopy ◽  
Light Irradiation ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Visible Photocatalytic Activity

MoS2/TiO2 heterostructure thin films were fabricated by sol-gel and chemical bath deposition methods. Crystal structure, surface morphology, chemical states of all elements, and optical property of the obtained thin films were characterized by using X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, and UV-Vis spectroscopy techniques, respectively. Photocatalytic activity of all thin films was evaluated by measuring decomposition rate of methylene blue solution under visible light irradiation. The results indicate that ultrathin MoS2 film on TiO2-glass substrate improves photocatalytic activity of TiO2 in the visible light due to the efficient absorption of visible photon of MoS2 few layers and the transfer of electrons from MoS2 to TiO2. All MoS2/TiO2 heterostructure thin films exhibit higher visible light photocatalytic activity than that of pure MoS2 and TiO2 counterparts. The best MoS2/TiO2 heterostructure thin film at MoS2 layer deposition time of 45 minutes can decompose about 60% MB solution after 150 minutes under visible light irradiation. The mechanism of the enhancement for visible-photocatalytic activity of MoS2/TiO2 heterostructure thin film was also discussed.

Photocatalytic Activity of CuO/ZnO Heterostructure Nanocrystals under UV-Visible Light Irradiation

2014 ◽  
Vol 787 ◽  
pp. 35-40 ◽  
Author(s):  
Xiao Yan Zhou ◽  
Peng Wei Zhou ◽  
Hao Guo ◽  
Bo Yang ◽  
Ru Fei Ren
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Visible Light Irradiation ◽  
Cuo Nanoparticles ◽  
Light Irradiation ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Uv Visible

The p-n junction photocatalysts, p-CuO (at. 0-25%)/n-ZnO nanocomposite were prepared through hydrothermal method without using any organic solvent or surfactant. The as-prepared samples were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-Ray spectroscopy, and UV-vis spectroscopy. The results demonstrated that the CuO/ZnO nanocomposite presented a two-dimensional morphology composed of sheet-like ZnO nanostructures adorned with CuO nanoparticles. The photocatalytic activity of CuO/ZnO with different Cu/Zn molar rations and pure ZnO synthesized by the identical synthetic route were evaluated by degrading methylene blue (MB) dye under UV-visible light irradiation. The CuO/ZnO with Cu/Zn molar ratio of 4% exhibits the highest photocatalytic activity compared that of the other photocatalysts under the identical conditions. It is mainly attributed to the increased charge separation rate in the nanocomposite and the extended photo-responding range.

Photocatalytic Decomposition of Methylene Blue with Lanthanum Doping TiO2 under Visible Light Irradiation

2013 ◽  
Vol 734-737 ◽  
pp. 2163-2167
Author(s):  
Guang Xiu Cao ◽  
Zhong Hou Zhang ◽  
Bin Zhai
Keyword(s):  
Methylene Blue ◽  
Visible Light ◽  
Visible Light Irradiation ◽  
Photoelectron Spectroscopy ◽  
Light Irradiation ◽  
Photocatalytic Decomposition ◽  
Lanthanum Doping ◽  
X Ray ◽  
Degradation Rates ◽  
Vis Spectroscopy

Lanthanum doped TiO2 powders were prepared by hydrolysis of titanium tetra-n-butyl oxide and La (NO3)3 in solution. The resulting powders were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-Vis absorption spectroscopy. The photocatalytic activities of doped samples were evaluated by the decomposition of methylene blue under visible light irradiation. The XRD results showed that the doping of lanthanum could not only efficiently inhibit the grain growth but also suppress the phase transition of anatase to rutile. UV-Vis spectroscopy of lanthanum doping TiO2 indicated that the absorption onset red-shifted to the visible light region. XPS results revealed that La2O3 had formed which could enhance the surface area. The degradation rates of methylene blue verified that the visible light photocatalytic activity of TiO2 has been enhanced by the doping of lanthanum.

Photocatalytic properties of p-n heterojunction Ag2CO3/Ag3PO4/Ni thin films under visible light

2019 ◽  
Vol 12 (06) ◽  
pp. 1950085 ◽  
Author(s):  
Di Zhao ◽  
Xuezheng An ◽  
Yaxian Sun ◽  
Guihua Li ◽  
Hongyan Liu ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Visible Light ◽  
Visible Light Irradiation ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
Light Irradiation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Photodegradation Efficiency

p-n heterojunction Ag2CO3/Ag3PO4/Ni thin films were prepared by electrochemical co-deposition. The surface morphology and structural properties of the thin films were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), and ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS). The photocatalytic (PC) properties of the Ag2CO3/Ag3PO4/Ni composite thin films were investigated by their ability to degrade rhodamine B (RhB) and Congo red (CR) under visible light irradiation. The results showed that the photodegradation efficiency of RhB by an Ag2CO3/Ag3PO4/Ni thin film under visible-light irradiation for 30[Formula: see text]min (98.84%) was 2.64 times higher than that of an Ag3PO4/Ni thin film and 3.44 times higher than of an Ag2CO3/Ni thin film. The presence of a [Formula: see text]-[Formula: see text] heterojunction greatly increased the charge conductivity of the film and its ability to photocatalytically reduce dissolved oxygen, which are the main reasons for the improved PC performance of the Ag2CO3/Ag3PO4/Ni films.

Preparation of BiXY(2-X)O3 and its Photocatalytic Degradation of Molasses Fermentation Wastewater under Visible-Light Irradiation

2011 ◽  
Vol 287-290 ◽  
pp. 1640-1645 ◽  
Author(s):  
Min Guang Fan ◽  
Zu Zeng Qin ◽  
Zi Li Liu ◽  
Tong Ming Su
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photocatalytic Degradation ◽  
Visible Light Irradiation ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
Active Oxygen Species ◽  
Light Irradiation ◽  
X Ray

A series of BixY(2-x)O3photocatalysts were successfully prepared by a solid-state reaction and were subsequently characterized by powder X-ray diffraction, UV-vis diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy (XPS). The UV-vis diffuse reflectance spectra revealed that the BixY(2-x)O3samples absorbed light in the visible-light range (400-800 nm). The XPS results indicated that active oxygen species were generated on the Bi1.8Y0.2O3surface, which displayed a higher photocatalytic activity. When using photocatalytic degradation molasses fermentation wastewater as a model reaction, the Bi1.8Y0.2O3showed higher photocatalytic activity in comparison to Bi0.2Y1.8O3under visible-light irradiation.

scholarly journals Synthesis, Property Characterization and Photocatalytic Activity of the Ag3PO4/Gd2BiTaO7 Heterojunction Catalyst under Visible Light Irradiation

Catalysts ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 22
Author(s):  
Jingfei Luan ◽  
Zhijie Wei ◽  
Bowen Niu ◽  
Guangmin Yang ◽  
Cisheng Huang ◽  
...  
Keyword(s):  
Thin Film ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Photocatalytic Degradation ◽  
Visible Light Irradiation ◽  
Removal Rate ◽  
Light Irradiation ◽  
Phase Method ◽  
High Catalytic Activity ◽  
X Ray

A new type of Gd2BiTaO7 nanocatalyst (GBT) was synthesized by a high-temperature solid-phase method, and a heterojunction photocatalyst, which was composed of GBT and silver phosphate (AP), was prepared by the facile in-situ precipitation method for the first time. The photocatalytic property of GBT or the Ag3PO4/Gd2BiTaO7 heterojunction photocatalyst (AGHP) was reported. The structural properties of GBT and AGHP were characterized by an X-ray diffractometer, scanning electron microscope–X-ray energy dispersive spectra, an X-ray photoelectron spectrograph, a synchrotron-based ultraviolet photoelectron spectroscope, a Fourier transform infrared spectrometer, an UV-Vis diffuse reflectance spectrophotometer and an electron paramagnetic resonance spectrometer. The results displayed that GBT was well crystallized with a stable cubic crystal system and space group Fd3m. The lattice parameter or band gap energy of GBT was found to be a = 10.740051 Å or 2.35 eV, respectively. After visible light irradiation of 30 min, the removal rate of bisphenol A (BPA) reached 99.52%, 95.53% or 37.00% with AGHP as the photocatalyst, with Ag3PO4 and potassium persulfate (AP-PS) as photocatalysts or with N-doped TiO2 (NT) as a photocatalyst, respectively. According to the experimental data, it could be found that the removal rate of BPA with AGHP as a photocatalyst was 2.69 times higher than that with NT as a photocatalyst. AGHP showed higher photocatalytic activity for photocatalytic degradation of BPA under visible light irradiation compared with GBT or AP-PS or NT. The removal rate of total organic carbon (TOC) was 96.21%, 88.10% or 30.55% with AGHP as a photocatalyst, with AP-PS as photocatalysts or with NT as a photocatalyst after visible light irradiation of 30 min. The above results indicated that AGHP possessed the maximal mineralization percentage ratio during the process of degrading BPA compared with GBT or AP-PS or NT. The results indicated that the main oxidation radical was •OH during the process of degrading BPA. The photocatalytic degradation of BPA with AGHP as a photocatalyst conformed to the first-order reaction kinetics. This study provided inspiration for obtaining visible light-responsive heterojunction photocatalysts with high catalytic activity and efficient removal technologies for organic pollutants and toxic pollutants, and as a result, the potential practical applications of visible light-responsive heterojunction photocatalysts were widened. The subsequent research of thin-film plating of the heterojunction catalysts and the construction of complete photoluminescent thin-film catalytic reaction systems, which utilized visible light irradiation, could provide new technologies and perspectives for the pharmaceutical wastewater treatment industry.

scholarly journals Enhanced Hydrogen Production over C-Doped CdO Photocatalyst in NaS/NaSO Solution under Visible Light Irradiation

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Quan Gu ◽  
Huaqiang Zhuang ◽  
Jinlin Long ◽  
Xiaohan An ◽  
Huan Lin ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Visible Light Irradiation ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
Light Irradiation ◽  
X Ray ◽  
State Process ◽  
Visible Light Photocatalytic

The C-doped CdO photocatalysts were simply prepared by high-temperature solid-state process. The as-prepared photocatalysts were characterized by X-ray powder diffraction (XRD), diffuse reflectance spectroscopy (UV-Vis DRS), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The results demonstrated that the carbon was doped into CdO, resulting in the red-shift of the optical absorption of CdO. The photocatalytic behavior of CdO and C-doped CdO was evaluated under the visible light irradiation by using the photocatalytic hydrogen evolution as a model reaction. The C-doped CdO photocatalysts had higher photocatalytic activity over parent CdO under visible light irradiation. The results indicated that the H2production was due to the existence of CdS and the enhancement of visible light photocatalytic activity of H2production was originated from the doping of carbon into the CdO lattice. The probably reaction mechanism was also discussed and proposed.

Photocatalytic Degradation of NOx Over Platinum and Nitrogen Codoped Titanium Dioxide Under Visible Light Irradiation

2007 ◽  
Vol 72 (3) ◽  
pp. 379-391 ◽  
Author(s):  
Lin Zhou ◽  
Xin Tan ◽  
Lin Zhao ◽  
Ming Sun
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Visible Light Irradiation ◽  
Photoelectron Spectroscopy ◽  
Process Analysis ◽  
Catalytic Efficiency ◽  
Light Irradiation ◽  
Significant Shift ◽  
X Ray ◽  
Term Operation

In order to utilize visible light and enhance the catalytic efficiency in photocatalytic conversion of NOx, nitrogen and platinum atoms were doped in commercially available photocatalytic TiO2 powders by impregnating and photodeposition methods, respectively. X-ray diffraction (XRD) showed that the crystal structures of TiO2 were not changed after the doping process. Analysis by X-ray photoelectron spectroscopy (XPS) indicated that N atoms were incorporated in the bulk phase of TiO2 as N-Ti-O linkages and Pt atoms were at the surface. A significant shift of the absorption edge to lower energy and higher absorption in the visible light region were observed. This Pt,N-codoped TiO2 powder exhibited excellent photocatalytic activity and fairly stable chemical property for the degradation of NOx under visible light irradiation. The sample mixed with 20 wt.% ammonium carbonate and doped with 0.5 at.% platinum atoms showed the best photocatalytic activity and its activity can be restored by rinsing with water after long-term operation.

scholarly journals Enhanced Visible Light Photocatalytic Activity for TiO2Nanotube Array Films by Codoping with Tungsten and Nitrogen

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Min Zhang ◽  
Juan Wu ◽  
DanDan Lu ◽  
Jianjun Yang
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Hydrothermal Treatment ◽  
Visible Light Irradiation ◽  
Photoelectron Spectroscopy ◽  
Light Irradiation ◽  
Nanotube Arrays ◽  
Hydroxyl Groups ◽  
Diffuse Reflection Spectroscopy ◽  
X Ray

A series of W, N codoped TiO2nanotube arrays with different dopant contents were fabricated by anodizing in association with hydrothermal treatment. The samples were characterized by scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and ultraviolet-visible light diffuse reflection spectroscopy. Moreover, the photocatalytic activity of W and N codoped TiO2nanotube arrays was evaluated by degradation of methylene blue under visible light irradiation. It was found that N in codoped TNAs exists in the forms of Ti-N-O, while W exists as W6+by substituting Ti in the lattice of TiO2. In the meantime, W and N codoping successfully extends the absorption of TNAs into the whole visible light region and results in remarkably enhanced photocatalytic activity under visible light irradiation. The mechanism of the enhanced photocatalytic activity could be attributed to (i) increasing number of hydroxyl groups on the surface of TNAs after the hydrothermal treatment, (ii) a strong W-N synergistic interaction leads to produce new states, narrow the band gap which decrease the recombination effectively, and then greatly increase the visible light absorption and photocatalytic activity; (iii) W ions with changing valences in all codoped samples which are considered to act as trapping sites, effectively decrease the recombination rate of electrons and holes, and improve the photocatalytic activity.

scholarly journals Synthesis of Ag3PO4 using Hydrophylic Polymer and Their Photocatalytic Activities under Visible Light Irradiation

2017 ◽  
Vol 12 (2) ◽  
pp. 206 ◽  
Author(s):  
Uyi Sulaeman ◽  
Bin Liu ◽  
Shu Yin ◽  
Tsugio Sato
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Visible Light Irradiation ◽  
Photoelectron Spectroscopy ◽  
Light Irradiation ◽  
X Ray ◽  
Photocatalytic Activities

The highly active Ag3PO4 photocatalysts were successfully synthesized using the hydrophylic polymer of PVA (polyvinyl alcohol), PEG (polyethylene glycol) and PVP (polyvinyl pyrrolidone). The products were characterized using X-ray diffraction (XRD), Diffuse reflection spectroscopy (DRS), Field emission scanning electron microscope (FE-SEM), Brunauer–Emmett–Teller (BET) specific surface area, and X-ray photoelectron spectroscopy (XPS). Photocatalytic activities were evaluated using decomposition of Rhodamine B (RhB) under visible light irradiation. The results showed that the PVA, PEG, and PVP increased the specific surface area and enhanced the photocatalytic activity of Ag3PO4. The highest photocatalytic activity could be observed in Ag3PO4 synthesized with PVA, mainly due to an increase in electron excitation induced by PVA chemically adsorbed on the surface. Copyright © 2017 BCREC Group. All rights reservedReceived: 13rd November 2016; Revised: 10th February 2017; Accepted: 10th February 2017How to Cite: Sulaeman, U., Liu, B., Yin, S., Sato, T. (2017). Synthesis of Ag3PO4 using Hydrophylic Polymer and Their Photocatalytic Activities under Visible Light Irradiation. Bulletin of Chemical Reaction Engineering & Catalysis, 12 (2): 206-211 (doi:10.9767/bcrec.12.2.767.206-211)Permalink/DOI: http://dx.doi.org/10.9767/bcrec.12.2.767.206-211 

scholarly journals Synthesis of Nitrogen-Doped ZnS with Camellia Brushfield Yellow Nanostructures for Enhanced Photocatalytic Activity under Visible Light Irradiation

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Gang-Juan Lee ◽  
Chi-Lun Hong ◽  
Valentina Batalova ◽  
Gennady Mokrousov ◽  
Jerry Wu
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Visible Light Irradiation ◽  
Photoelectron Spectroscopy ◽  
Light Irradiation ◽  
X Ray ◽  
Nitrogen Doped ◽  
Composite Catalysts ◽  
N Doping

Nitrogen modified zinc sulfide photocatalysts were successfully prepared and characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), X-ray photoelectron spectroscopy (XPS), and surface area analysis. Thermal decomposition of the semisolid was carried out under nitrogen conditions at 500°C for 2 hours, and a series of nitrogen-doped ZnS photocatalysts were produced by controlling inflow flow rate of nitrogen at 15–140 mL/min. Optical characterizations of the synthesized N-doping ZnS substantially show the shifted photoabsorption properties from ultraviolet (UV) region to visible light. The band gaps of nitrogen-doped ZnS composite catalysts were calculated to be in the range of 2.58~2.74 eV from the absorptions edge position. The 15N/ZnS catalyst shows the highest photocatalytic activity, which results in 75.7% degradation of Orange II dye in 5 hrs by visible light irradiation, compared with pristine ZnS and higher percentage N-doping ZnS photocatalysts.

Sign in / Sign up

Export Citation Format

Share Document