Hydrothermal and alkaline hydrothermal pretreatments plus anaerobic digestion of sewage sludge for dewatering and biogas production: Bench-scale research and pilot-scale verification

2017 ◽  
Vol 117 ◽  
pp. 49-57 ◽  
Author(s):  
Chunxing Li ◽  
Xingdong Wang ◽  
Guangyi Zhang ◽  
Guangwei Yu ◽  
Jingjiang Lin ◽  
...  
Author(s):  
Mauro Lafratta ◽  
Rex B. Thorpe ◽  
Sabeha K. Ouki ◽  
Achame Shana ◽  
Eve Germain ◽  
...  

Abstract The power system needs flexible electricity generators. Whilst electricity generation from anaerobic digestion (AD) of sewage sludge has traditionally been baseload, transforming the generation capacity into a modern flexible operator is an opportunity to further valorise the resource. This work aims to demonstrate that AD of sewage sludge can support flexible generation and be operated dynamically in a relevant operational environment, to promote full scale implementation. A demonstration scale plant (20 m3 conventional AD reactors) was used to test several feeding regimes designed to return a biogas production rate that matches the demand. Two demand profiles are defined, either by common corporate power purchase agreements or by the main balancing mechanism used by the grid operator in UK. Demand-driven biogas production is demonstrated in this relevant operational environment, and the flexibilisation performance is positive in all scenarios. The value of the biogas increases by up to 2%, which outperforms the results obtained at pilot scale. Additionally, an increase in biogas yield is observed. Whilst transitional imbalances are recorded, they last for few hours and the overall stability is not affected. In conclusion, these trials demonstrate demand-driven biogas production is a feasible operational solution and full-scale implementation is possible. Graphical Abstract


Author(s):  
Kai Schumüller ◽  
Dirk Weichgrebe ◽  
Stephan Köster

AbstractTo tap the organic waste generated onboard cruise ships is a very promising approach to reduce their adverse impact on the maritime environment. Biogas produced by means of onboard anaerobic digestion offers a complementary energy source for ships’ operation. This report comprises a detailed presentation of the results gained from comprehensive investigations on the gas yield from onboard substrates such as food waste, sewage sludge and screening solids. Each person onboard generates a total average of about 9 kg of organic waste per day. The performed analyses of substrates and anaerobic digestion tests revealed an accumulated methane yield of around 159 L per person per day. The anaerobic co-digestion of sewage sludge and food waste (50:50 VS) emerged as particularly effective and led to an increased biogas yield by 24%, compared to the mono-fermentation. In the best case, onboard biogas production can provide an energetic output of 82 W/P, on average covering 3.3 to 4.1% of the total energy demand of a cruise ship.


2012 ◽  
Vol 531 ◽  
pp. 528-531 ◽  
Author(s):  
Na Wei

Anaerobic digestion is an economic and environmentally friendly technology for treating the biomass material-sewage sludge, but has some limitations, such as the low efficient biogass production. In this paper ultrasound was proposed as pre-treatment for effective sludge anaerobic digestion. Sludge anaerobic digestion experiments with ultrasonic pretreatment was investigated. It can be seen that this treatment effectively leaded to the increase of soluble chemical oxygen demand(SCOD) and volatile fatty acids(VFA)concentration. High concentration of VFA leaded to a increase in biogas production. Besides, the SV of sludge was reduced and the settling characteristics of sludge was improved after ultrasonic pretreatment. It can be concluded that sludge anaerobic digestion with ultrasonic pretreatment is an effective method for biomass material transformation.


2009 ◽  
Vol 60 (6) ◽  
pp. 1525-1532 ◽  
Author(s):  
S. Pérez-Elvira ◽  
M. Fdz-Polanco ◽  
F. I. Plaza ◽  
G. Garralón ◽  
F. Fdz-Polanco

Prior research indicates that ultrasounds can be used in batch reactors as pre-treatment before anaerobic digestion, but the specific energy required at laboratory-scale is too high. This work evaluates both the continuous ultrasound device performance (efficiency and solubilisation) and the operation of anaerobic digesters continuously fed with sonicated sludge, and presents energy balance considerations. The results of sludge solubilisation after the sonication treatment indicate that, applying identical specific energy, it is better to increase the power than the residence time. Working with secondary sludge, batch biodegradability tests show that by applying 30 kWh/m3 of sludge, it is possible to increase biogas production by 42%. Data from continuous pilot-scale anaerobic reactors (V=100 L) indicate that operating with a conventional HRT = 20 d, a reactor fed with pre-treated sludge increases the volatile solids removal and the biogas production by 25 and 37% respectively. Operating with HRT = 15 d, the removal efficiency is similar to the obtained with a reactor fed with non-hydrolysed sludge at HTR = 20 d, although the specific biogas productivity per volume of reactor is higher for the pretreated sludge. Regarding the energy balance, although for laboratory-scale devices it is negative, full-scale suppliers state a net generation of 3–10 kW per kW of energy used.


2012 ◽  
Vol 66 (6) ◽  
pp. 1277-1281 ◽  
Author(s):  
P. Jenicek ◽  
J. Bartacek ◽  
J. Kutil ◽  
J. Zabranska ◽  
M. Dohanyos

Anaerobic digestion is the only energy-positive technology widely used in wastewater treatment. Full-scale data prove that the anaerobic digestion of sewage sludge can produce biogas that covers a substantial amount of the energy consumption of a wastewater treatment plant (WWTP). In this paper, we discuss possibilities for improving the digestion efficiency and biogas production from sewage sludge. Typical specific energy consumptions of municipal WWTPs per population equivalent are compared with the potential specific production of biogas to find the required/optimal digestion efficiency. Examples of technological measures to achieve such efficiency are presented. Our findings show that even a municipal WWTP with secondary biological treatment located in a moderate climate can come close to energy self-sufficiency. However, they also show that such self-sufficiency is dependent on: (i) the strict optimization of the total energy consumption of the plant, and (ii) an increase in the specific biogas production from sewage sludge to values around 600 L per kg of supplied volatile solids.


2017 ◽  
Vol 65 (51) ◽  
pp. 11237-11242 ◽  
Author(s):  
Chao Huang ◽  
Cheng Zhao ◽  
Hai-Jun Guo ◽  
Can Wang ◽  
Mu-Tan Luo ◽  
...  

2016 ◽  
Vol 14 (6) ◽  
pp. 1241-1254 ◽  
Author(s):  
Ousman R. Dibaba ◽  
Sandip K. Lahiri ◽  
Stephan T’Jonck ◽  
Abhishek Dutta

Abstract A pilot scale Upflow Anaerobic Contactor (UAC), based on upflow sludge blanket principle, was designed to treat vinasse waste obtained from beet molasses fermentation. An assessment of the anaerobic digestion of vinasse was carried out for the production of biogas as a source of energy. Average Organic loading rate (OLR) was around 7.5 gCOD/m3/day in steady state, increasing upto 8.1 gCOD/m3/day. The anaerobic digestion was conducted at mesophilic (30–37 °C) temperature and a stable operating condition was achieved after 81 days with average production of 65 % methane which corresponded to a maximum biogas production of 85 l/day. The optimal performance of UAC was obtained at 87 % COD removal, which corresponded to a hydraulic retention time of 16.67 days. The biogas production increased gradually with OLR, corresponding to a maximum 6.54 gCOD/m3/day (7.4 % increase from initial target). A coupled Artificial Neural Network-Differential Evolution (ANN-DE) methodology was formulated to predict chemical oxygen demand (COD), total suspended solids (TSS) and volatile fatty acids (VFA) of the effluent along with the biogas production. The method incorporated a DE approach for the efficient tuning of ANN meta-parameters such as number of nodes in hidden layer, input and output activation function and learning rate. The model prediction indicated that it can learn the nonlinear complex relationship between the parameters and able to predict the output of the contactor with reasonable accuracy. The utilization of the coupled ANN-DE model provided significant improvement to the study and helps to study the parametric effect of influential parameters on the reactor output.


Sign in / Sign up

Export Citation Format

Share Document