scholarly journals A variable resonance magnetorheological-fluid-based pendulum tuned mass damper for seismic vibration suppression

2019 ◽  
Vol 116 ◽  
pp. 530-544 ◽  
Author(s):  
M.D. Christie ◽  
S. Sun ◽  
L. Deng ◽  
D.H. Ning ◽  
H. Du ◽  
...  
Keyword(s):  
Vibration Suppression ◽  
Magnetorheological Fluid ◽  
Tuned Mass Damper ◽  
Seismic Vibration ◽  
Mass Damper

scholarly journals Vibration suppression of structures using tuned mass damper technology: A state-of-the-art review

2021 ◽  
pp. 107754632098430
Author(s):  
Fan Yang ◽  
Ramin Sedaghati ◽  
Ebrahim Esmailzadeh
Keyword(s):  
Mathematical Modeling ◽  
Vibration Suppression ◽  
State Of The Art ◽  
Optimization Procedure ◽  
Tuned Mass Damper ◽  
Structural Vibration ◽  
Practical Realization ◽  
Reliable Operation ◽  
Mass Damper ◽  
Structural Vibration Suppression

To date, considerable attention has been paid to the development of structural vibration suppression techniques. Among all vibration suppression devices and techniques, the tuned mass damper is one of the most promising technologies due to its mechanical simplicity, cost-effectiveness, and reliable operation. In this article, a critical review of the structural vibration suppression using tuned mass damper technology will be presented mainly focused on the following four categories: (1) tuned mass damper technology and its modifications, (2) tuned mass damper technology in discrete and continuous structures (mathematical modeling), (3) optimization procedure to obtain the optimally designed tuned mass damper system, and (4) active tuned mass damper and semi-active tuned mass damper with the practical realization of the tuned mass damper technologies.

The Two-Degree-of-Freedom Tuned-Mass Damper for Suppression of Single-Mode Vibration Under Random and Harmonic Excitation

2005 ◽  
Vol 128 (1) ◽  
pp. 56-65 ◽  
Author(s):  
Lei Zuo ◽  
Samir A. Nayfeh
Keyword(s):  
Vibration Suppression ◽  
Single Mode ◽  
Tuned Mass Damper ◽  
Harmonic Excitation ◽  
Degree Of Freedom ◽  
Primary System ◽  
H Infinity ◽  
Mass Damper ◽  
Mode Vibration ◽  
Two Degree Of Freedom

Whenever a tuned-mass damper is attached to a primary system, motion of the absorber body in more than one degree of freedom (DOF) relative to the primary system can be used to attenuate vibration of the primary system. In this paper, we propose that more than one mode of vibration of an absorber body relative to a primary system be tuned to suppress single-mode vibration of a primary system. We cast the problem of optimization of the multi-degree-of-freedom connection between the absorber body and primary structure as a decentralized control problem and develop optimization algorithms based on the H2 and H-infinity norms to minimize the response to random and harmonic excitations, respectively. We find that a two-DOF absorber can attain better performance than the optimal SDOF absorber, even for the case where the rotary inertia of the absorber tends to zero. With properly chosen connection locations, the two-DOF absorber achieves better vibration suppression than two separate absorbers of optimized mass distribution. A two-DOF absorber with a negative damper in one of its two connections to the primary system yields significantly better performance than absorbers with only positive dampers.

On Vibration Suppression and Energy Dissipation Using Tuned Mass Particle Damper

2016 ◽  
Author(s):  
Shilong Li ◽  
J. Tang
Keyword(s):  
Primary Structure ◽  
Vibration Suppression ◽  
Tuned Mass Damper ◽  
Harsh Environment ◽  
Gravitational Acceleration ◽  
Mass Particle ◽  
Damping Effect ◽  
Numerical Studies ◽  
Mass Damper ◽  
Particle Damping

Particle damping has the promising potential for attenuating the unwanted vibrations in harsh environment. However, the damping performance of the conventional particle damper (PD) may be ineffective, especially when the acceleration of the particle damper is less than gravitational acceleration (1g). In order to improve the damping performance of the traditional PD, the tuned mass particle damper (TMPD) which utilizes the advantages of both the tuned mass damper and particle damper is investigated in this paper. The TMPD can act as the tuned mass damper to not only absorb the vibration of the primary structure but also amplify the motions of the particles in the enclosure, which will significantly enhance the particle damping effect. To analyze the damping effect of the TMPD, a new coupling method to integrate the TMPD into the continuous host structure is first developed. The 3D discrete element method is then adopted to accurately describe and analyze the motion of particles in the enclosure. Furthermore, the analysis is validated by correlating the numerical and experimental results. With the new method as basis, detailed numerical studies are further carried out to verify the damping effectiveness of the TMPD compared with conventional PD under various excitation levels. The results demonstrate that the TMPD can significantly improve the damping effect of the conventional PD on suppressing the vibration of the primary structure under both the low and high excitation levels.

scholarly journals On Vibration Suppression and Energy Dissipation Using Tuned Mass Particle Damper

2016 ◽  
Vol 139 (1) ◽  
Author(s):  
Shilong Li ◽  
J. Tang
Keyword(s):  
Energy Dissipation ◽  
Vibration Suppression ◽  
Tuned Mass Damper ◽  
Integrated System ◽  
Mass Particle ◽  
Local Displacement ◽  
Damping Effect ◽  
Mass Damper ◽  
Particle Damping ◽  
Damping Materials

Particle damping has the promising potential for attenuating unwanted vibrations in harsh environments especially under high temperatures where conventional damping materials would not be functional. Nevertheless, a limitation of simple particle damper (PD) configuration is that the damping effect is insignificant if the local displacement/acceleration is low. In this research, we investigate the performance of a tuned mass particle damper (TMPD) in which the particle damping mechanism is integrated into a tuned mass damper (TMD) configuration. The essential idea is to combine the respective advantages of these two damping concepts and in particular to utilize the tuned mass damper configuration as a motion magnifier to amplify the energy dissipation capability of particle damper when the local displacement/acceleration of the host structure is low. We formulate a first-principle-based dynamic model of the integrated system and analyze the particle motion by using the discrete element method (DEM). We perform systematic parametric studies to elucidate the damping effect and energy dissipation mechanism of a TMPD. We demonstrate that a TMPD can provide significant vibration suppression capability, essentially outperforming conventional particle damper.

Simultaneous Vibration Mitigation and Energy Harvesting for a Nonlinear Oscillator

2020 ◽  
Author(s):  
Paul Kakou ◽  
Oumar Barry
Keyword(s):  
Energy Harvesting ◽  
Nonlinear Oscillator ◽  
Vibration Suppression ◽  
Tuned Mass Damper ◽  
Maximum Energy ◽  
Superior Performance ◽  
Design Parameters ◽  
Vibration Mitigation ◽  
Mass Damper ◽  
Resonant Shunt

Abstract Considerable attention has been recently given to electromagnetic resonant shunt tuned mass damper-inerter (EH-TMDI) for simultaneous vibration mitigation and energy harvesting. However, only linear structures have been investigated. Hence, in this paper, we aim at simultaneously achieving vibration mitigation and energy harvesting for nonlinear oscillators. To do so, we attach a nonlinear electromagnetic resonant shunt tuned mass damper-inerter (NEH-TMDI) to a single degree of freedom nonlinear oscillator (Duffing Oscillator). The nonlinear oscillator is coupled to the tuned mass damper via a linear and a nonlinear spring. Both the electromagnetic and the inerter devices are grounded on one side and connected to the nonlinear vibration absorber on the other side. This is done so to relax the trade off between energy harvesting and vibration suppression. The electromagnetic transducer is shunted to a resistor-inductor circuit. The governing equations of motion are derived using Newton’s method. Numerical simulations are carried out to examine the performance of the proposed NEH-TMDI. Comprehensive parametric analyses are conducted to identify the key design parameters that render the best performance of the NEH-TMDI. The results show that selected parameters offer regions were maximum energy dissipated and maximum energy harvested coincide. The findings are very promising and open a horizon of future opportunities to optimize the design of the NEH-TMDI for superior performance.

Sign in / Sign up

Export Citation Format

Share Document