Life cycle assessment of electricity production from poplar energy crops compared with conventional fossil fuels

2001 ◽  
Vol 42 (1) ◽  
pp. 32-33
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Fossil Fuels ◽  
Energy Crops ◽  
Electricity Production

Life Cycle Assessment of Modern Wind Power Plants

2010 ◽  
Author(s):  
Hannes M. Hapke ◽  
Karl R. Haapala ◽  
Zhaohui Wu ◽  
Ted K. A. Brekken
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Wind Power ◽  
Environmental Sustainability ◽  
Power Plants ◽  
Wind Farm ◽  
Fossil Fuels ◽  
Environmental Benefits ◽  
Electricity Production ◽  
Wind Power Plants

Power generation for the existing electrical grid is largely based on the combustion of fossil fuels. Global concerns have been raised regarding the environmental sustainability of the system due to life cycle impacts, including land losses from fuel extraction and impacts of combustion emissions. An approach to reduce carbon emissions of fossil fuel-based energy employs the conversion of wind energy to electrical energy. The work presented describes modern wind power plants and provides an environmental assessment of a representative wind park from a life cycle perspective. The empirical analysis uses commercially available data, as well as information from an existing wind power plant. The life cycle assessment (LCA) study for a modern wind farm in the northwestern U.S. found that environmental benefits of avoiding typical electricity production greatly outweigh the impacts due to wind turbine construction and maintenance. Effects of component reliability, varying capacity factors, and energy portfolio are explored.

scholarly journals Life Cycle Assessment of New High Concentration Photovoltaic (HCPV) Modules and Multi-Junction Cells

Energies ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 2916
Author(s):  
Jérôme Payet ◽  
Titouan Greffe
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Carbon Footprint ◽  
Energy Demand ◽  
Fossil Fuels ◽  
Active Material ◽  
Assessment Method ◽  
Electricity Production ◽  
Low Carbon ◽  
High Concentration

Worldwide electricity consumption increases by 2.6% each year. Greenhouse gas emissions due to electricity production raise by 2.1% per year on average. The development of efficient low-carbon-footprint renewable energy systems is urgently needed. CPVMatch investigates the feasibility of mirror or lens-based High Concentration Photovoltaic (HCPV) systems. Thanks to innovative four junction solar cells, new glass coatings, Position Sensitive Detectors (PSD), and DC/DC converters, it is possible to reach concentration levels higher than 800× and a module efficiency between 36.7% and 41.6%. From a circular economy’s standpoint, the use of concentration technologies lowers the need in active material, increases recyclability, and reduces the risk of material contamination. By using the Life Cycle Assessment method, it is demonstrated that HCPV presents a carbon footprint ranking between 16.4 and 18.4 g CO2-eq/kWh. A comparison with other energy means for 16 impact categories including primary energy demand and particle emissions points out that the environmental footprint of HCPV is typically 50 to 100 times lower than fossil fuels footprint. HCPV’s footprint is also three times lower than that of crystalline photovoltaic solutions and is close to the environmental performance of wind power and hydropower.

scholarly journals Life Cycle Assessment of electricity production in Italy from anaerobic co-digestion of pig slurry and energy crops

2014 ◽  
Vol 68 ◽  
pp. 625-635 ◽  
Author(s):  
Lucía Lijó ◽  
Sara González-García ◽  
Jacopo Bacenetti ◽  
Marco Fiala ◽  
Gumersindo Feijoo ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Crops ◽  
Electricity Production ◽  
Pig Slurry

scholarly journals Life Cycle Assessment of Wood Pellet Production in Thailand

2020 ◽  
Vol 12 (17) ◽  
pp. 6996 ◽  
Author(s):  
Piyarath Saosee ◽  
Boonrod Sajjakulnukit ◽  
Shabbir Gheewala
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Fossil Fuels ◽  
Raw Materials ◽  
Electricity Production ◽  
Wood Pellets ◽  
Wood Pellet ◽  
Pellet Production ◽  
Production Processes

Thailand has increased wood pellet production for export and domestic use. The variations in production processes, raw materials, and transportation related to wood pellet production make it necessary to evaluate the environmental impacts assessment. The objective of this study was to compare via Life Cycle Assessment (LCA), eight different cases of wood pellet production varying in terms of raw materials, production processes, energy use, and the format of transportation and to compare LCA of electricity production from wood pellets and fossil fuels. The comparison results show that leucaena is better as a feedstock for wood pellet production than acacia due to shorter harvest cycle and lesser use of resources. Pellet production consumes the most energy contributing significantly to the environmental impacts. The use of fossil fuels in wood pellet production and transportation also has a major contribution to the environmental impacts. Using wood pellets for electricity production is better than lignite in terms of human health, ecosystem quality and resource scarcity. Recommendations from this study include increasing yield of feedstock plants, shortening harvest cycle, reducing overuse of fertilizers and herbicides, pollution control, reducing fossil fuel use in the supply chain, good logistics, feedstock access, and offering incentives considering the externality cost.

Life cycle assessment of selected future energy crops for Europe

2010 ◽  
Vol 4 (6) ◽  
pp. 620-636 ◽  
Author(s):  
Nils Rettenmaier ◽  
Susanne Köppen ◽  
Sven O. Gärtner ◽  
Guido A. Reinhardt
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Crops

scholarly journals Conversion of biomass to biofuels and life cycle assessment: a review

2021 ◽  
Author(s):  
Ahmed I. Osman ◽  
Neha Mehta ◽  
Ahmed M. Elgarahy ◽  
Amer Al-Hinai ◽  
Ala’a H. Al-Muhtaseb ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Demand ◽  
Fossil Fuels ◽  
Biomass Conversion ◽  
Biofuel Production ◽  
Process Efficiency ◽  
Liquid Fuels ◽  
Thermochemical Processes ◽  
Lower Temperature

AbstractThe global energy demand is projected to rise by almost 28% by 2040 compared to current levels. Biomass is a promising energy source for producing either solid or liquid fuels. Biofuels are alternatives to fossil fuels to reduce anthropogenic greenhouse gas emissions. Nonetheless, policy decisions for biofuels should be based on evidence that biofuels are produced in a sustainable manner. To this end, life cycle assessment (LCA) provides information on environmental impacts associated with biofuel production chains. Here, we review advances in biomass conversion to biofuels and their environmental impact by life cycle assessment. Processes are gasification, combustion, pyrolysis, enzymatic hydrolysis routes and fermentation. Thermochemical processes are classified into low temperature, below 300 °C, and high temperature, higher than 300 °C, i.e. gasification, combustion and pyrolysis. Pyrolysis is promising because it operates at a relatively lower temperature of up to 500 °C, compared to gasification, which operates at 800–1300 °C. We focus on 1) the drawbacks and advantages of the thermochemical and biochemical conversion routes of biomass into various fuels and the possibility of integrating these routes for better process efficiency; 2) methodological approaches and key findings from 40 LCA studies on biomass to biofuel conversion pathways published from 2019 to 2021; and 3) bibliometric trends and knowledge gaps in biomass conversion into biofuels using thermochemical and biochemical routes. The integration of hydrothermal and biochemical routes is promising for the circular economy.

scholarly journals Are Renewables as Friendly to Humans as to the Environment?: A Social Life Cycle Assessment of Renewable Electricity

2019 ◽  
Vol 11 (5) ◽  
pp. 1370 ◽  
Author(s):  
Shutaro Takeda ◽  
Alexander Keeley ◽  
Shigeki Sakurai ◽  
Shunsuke Managi ◽  
Catherine Norris
Keyword(s):  
Life Cycle Assessment ◽  
Supply Chain ◽  
Life Cycle ◽  
Social Life ◽  
Electricity Production ◽  
Social Life Cycle Assessment ◽  
Solar Photovoltaic ◽  
Energy Technologies ◽  
Electricity Mix ◽  
The Impact

The adoption of renewable energy technologies in developing nations is recognized to have positive environmental impacts; however, what are their effects on the electricity supply chain workers? This article provides a quantitative analysis on this question through a relatively new framework called social life cycle assessment, taking Malaysia as a case example. Impact assessments by the authors show that electricity from renewables has greater adverse impacts on supply chain workers than the conventional electricity mix: Electricity production with biomass requires 127% longer labor hours per unit-electricity under the risk of human rights violations, while the solar photovoltaic requires 95% longer labor hours per unit-electricity. However, our assessment also indicates that renewables have less impacts per dollar-spent. In fact, the impact of solar photovoltaic would be 60% less than the conventional mix when it attains grid parity. The answer of “are renewables as friendly to humans as to the environment?” is “not-yet, but eventually.”

Sign in / Sign up

Export Citation Format

Share Document