scholarly journals Life Cycle Assessment of New High Concentration Photovoltaic (HCPV) Modules and Multi-Junction Cells

Energies ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 2916
Author(s):  
Jérôme Payet ◽  
Titouan Greffe
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Carbon Footprint ◽  
Energy Demand ◽  
Fossil Fuels ◽  
Active Material ◽  
Assessment Method ◽  
Electricity Production ◽  
Low Carbon ◽  
High Concentration

Worldwide electricity consumption increases by 2.6% each year. Greenhouse gas emissions due to electricity production raise by 2.1% per year on average. The development of efficient low-carbon-footprint renewable energy systems is urgently needed. CPVMatch investigates the feasibility of mirror or lens-based High Concentration Photovoltaic (HCPV) systems. Thanks to innovative four junction solar cells, new glass coatings, Position Sensitive Detectors (PSD), and DC/DC converters, it is possible to reach concentration levels higher than 800× and a module efficiency between 36.7% and 41.6%. From a circular economy’s standpoint, the use of concentration technologies lowers the need in active material, increases recyclability, and reduces the risk of material contamination. By using the Life Cycle Assessment method, it is demonstrated that HCPV presents a carbon footprint ranking between 16.4 and 18.4 g CO2-eq/kWh. A comparison with other energy means for 16 impact categories including primary energy demand and particle emissions points out that the environmental footprint of HCPV is typically 50 to 100 times lower than fossil fuels footprint. HCPV’s footprint is also three times lower than that of crystalline photovoltaic solutions and is close to the environmental performance of wind power and hydropower.

Identifying energy and carbon footprint optimization potentials of a sludge treatment line with Life Cycle Assessment

2013 ◽  
Vol 67 (1) ◽  
pp. 63-73 ◽  
Author(s):  
C. Remy ◽  
B. Lesjean ◽  
J. Waschnewski
Keyword(s):  
Wastewater Treatment ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Greenhouse Gas ◽  
Carbon Footprint ◽  
Energy Demand ◽  
Fossil Fuels ◽  
Sludge Treatment ◽  
Treatment Line ◽  
The Impact

This study exemplifies the use of Life Cycle Assessment (LCA) as a tool to quantify the environmental impacts of processes for wastewater treatment. In a case study, the sludge treatment line of a large wastewater treatment plant (WWTP) is analysed in terms of cumulative energy demand and the emission of greenhouse gases (carbon footprint). Sludge treatment consists of anaerobic digestion, dewatering, drying, and disposal of stabilized sludge in mono- or co-incineration in power plants or cement kilns. All relevant forms of energy demand (electricity, heat, chemicals, fossil fuels, transport) and greenhouse gas emissions (fossil CO2, CH4, N2O) are accounted in the assessment, including the treatment of return liquor from dewatering in the WWTP. Results show that the existing process is positive in energy balance (–162 MJ/PECOD * a) and carbon footprint (–11.6 kg CO2-eq/PECOD * a) by supplying secondary products such as electricity from biogas production or mono-incineration and substituting fossil fuels in co-incineration. However, disposal routes for stabilized sludge differ considerably in their energy and greenhouse gas profiles. In total, LCA proves to be a suitable tool to support future investment decisions with information of environmental relevance on the impact of wastewater treatment, but also urban water systems in general.

scholarly journals Conversion of biomass to biofuels and life cycle assessment: a review

2021 ◽  
Author(s):  
Ahmed I. Osman ◽  
Neha Mehta ◽  
Ahmed M. Elgarahy ◽  
Amer Al-Hinai ◽  
Ala’a H. Al-Muhtaseb ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Demand ◽  
Fossil Fuels ◽  
Biomass Conversion ◽  
Biofuel Production ◽  
Process Efficiency ◽  
Liquid Fuels ◽  
Thermochemical Processes ◽  
Lower Temperature

AbstractThe global energy demand is projected to rise by almost 28% by 2040 compared to current levels. Biomass is a promising energy source for producing either solid or liquid fuels. Biofuels are alternatives to fossil fuels to reduce anthropogenic greenhouse gas emissions. Nonetheless, policy decisions for biofuels should be based on evidence that biofuels are produced in a sustainable manner. To this end, life cycle assessment (LCA) provides information on environmental impacts associated with biofuel production chains. Here, we review advances in biomass conversion to biofuels and their environmental impact by life cycle assessment. Processes are gasification, combustion, pyrolysis, enzymatic hydrolysis routes and fermentation. Thermochemical processes are classified into low temperature, below 300 °C, and high temperature, higher than 300 °C, i.e. gasification, combustion and pyrolysis. Pyrolysis is promising because it operates at a relatively lower temperature of up to 500 °C, compared to gasification, which operates at 800–1300 °C. We focus on 1) the drawbacks and advantages of the thermochemical and biochemical conversion routes of biomass into various fuels and the possibility of integrating these routes for better process efficiency; 2) methodological approaches and key findings from 40 LCA studies on biomass to biofuel conversion pathways published from 2019 to 2021; and 3) bibliometric trends and knowledge gaps in biomass conversion into biofuels using thermochemical and biochemical routes. The integration of hydrothermal and biochemical routes is promising for the circular economy.

Life Cycle Assessment of electricity production from poplar energy crops compared with conventional fossil fuels

1999 ◽  
Vol 40 (14) ◽  
pp. 1477-1493 ◽  
Author(s):  
Angelantonio Rafaschieri ◽  
Mario Rapaccini ◽  
Giampaolo Manfrida
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Fossil Fuels ◽  
Energy Crops ◽  
Electricity Production

scholarly journals Application of Life Cycle Assessment Method for Environmental Impact Assessment of Fired Brick Production Plant in Thailand

2016 ◽  
pp. 15-26 ◽  
Author(s):  
Rutjaya P. Na Talang ◽  
Sanya Sirivithayapakorn
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Rice Husk ◽  
Fossil Fuels ◽  
Specific Energy Consumption ◽  
Combustion Efficiency ◽  
Assessment Method ◽  
Production Plant ◽  
Control Mechanisms

In many Asian countries, fired bricksare producedby burning raw bricks in a rudimen-tary clamp kiln without pollution control mechanisms, a practice which contributes to several kinds of environmental impact. This research investigated the inputs and outputs associated with production of fired bricks using the rice husk-fuelled clamp kiln. Data collected includedraw material use, energy, products, emissions and kiln temperatures. To quantify environmental impacts, the consequential-focused life cycle assessment (LCA) approach was adopted. The impactswere assessed in terms of fuel substitution as the acquisition of another fuelwas re-quired to substitute for electricity. The findings indicated that the clamp kiln technology pro-duced lowCO2emissions per unit of production and per unit of energy input, despite poor specific energy consumption. The LCA analysis indicated that the use of rice husk was the major contributor to environmental impact, and that abiotic depletion of fossil fuels repre-sented the environmental hotspot. To improve combustion efficiency, the clamp kilns should beeither insulated or replaced with more efficient kiln technology, in conjunction with the use ofrice husk.

Life Cycle Assessment of Modern Wind Power Plants

2010 ◽  
Author(s):  
Hannes M. Hapke ◽  
Karl R. Haapala ◽  
Zhaohui Wu ◽  
Ted K. A. Brekken
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Wind Power ◽  
Environmental Sustainability ◽  
Power Plants ◽  
Wind Farm ◽  
Fossil Fuels ◽  
Environmental Benefits ◽  
Electricity Production ◽  
Wind Power Plants

Power generation for the existing electrical grid is largely based on the combustion of fossil fuels. Global concerns have been raised regarding the environmental sustainability of the system due to life cycle impacts, including land losses from fuel extraction and impacts of combustion emissions. An approach to reduce carbon emissions of fossil fuel-based energy employs the conversion of wind energy to electrical energy. The work presented describes modern wind power plants and provides an environmental assessment of a representative wind park from a life cycle perspective. The empirical analysis uses commercially available data, as well as information from an existing wind power plant. The life cycle assessment (LCA) study for a modern wind farm in the northwestern U.S. found that environmental benefits of avoiding typical electricity production greatly outweigh the impacts due to wind turbine construction and maintenance. Effects of component reliability, varying capacity factors, and energy portfolio are explored.

scholarly journals Life Cycle Assessment on Wave and Tidal Energy Systems: A Review of Current Methodological Practice

2020 ◽  
Vol 17 (5) ◽  
pp. 1604 ◽  
Author(s):  
Xizhuo Zhang ◽  
Longfei Zhang ◽  
Yujun Yuan ◽  
Qiang Zhai
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Systems ◽  
Tidal Energy ◽  
Electricity Production ◽  
Current Status ◽  
Future Research ◽  
Low Carbon ◽  
Iso 14040 ◽  
Methodological Practice

Recent decades have witnessed wave and tidal energy technology receiving considerable attention because of their low carbon emissions during electricity production. However, indirect emissions from their entire life cycle should not be ignored. Therefore, life cycle assessment (LCA) has been widely applied as a useful approach to systematically evaluate the environmental performance of wave and tidal energy technologies. This study reviews recent LCA studies on wave and tidal energy systems for stakeholders to understand current status of methodological practice and associated inherent limitations and reveal future research needs for application of LCA on wave and tidal technologies. The conformance of the selected LCAs to ISO 14040 (2006) and 14044 (2006) are critically analyzed in strict accordance with the ISO stepwise methodologies, namely, goal and scope definition, life cycle inventory (LCI) analysis, as well as life cycle impact assessment (LCIA). Our systematically screening of these studies indicates that few of the selected studies are of strict conformance with ISO 14040 and 14044 standards, which makes the results unreliable and thus further reduces the confidence of interested stakeholders. Further, our review indicates that current LCA practice on wave and tidal energies is lacking consideration of temporal variations, which should be addressed in future research, as it causes inaccuracy and uncertainties.

scholarly journals Study on Low Carbon Transition for Hazardous Chemical Packaging Based on Life Cycle Assessment and Grey Model

2017 ◽  
Author(s):  
Zhijie Feng ◽  
Lin Zhao ◽  
Shuai Wang ◽  
Qian Hou
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Carbon Footprint ◽  
Carbon Emission ◽  
Development Trend ◽  
Grey Model ◽  
Low Carbon ◽  
Hazardous Chemicals ◽  
Low Carbon Economy ◽  
Hazardous Chemical

The purpose of this paper was to analyze the development trend of hazardous chemical packaging towards low carbon economy from both qualitative and quantitative perspectives. Four types of relatively small volume packaging with volume/weight less than 450L/400kg, respectively, and three intermediate bulk containers (IBCs), which are widely used for hazardous chemicals were studied to calculate the carbon footprint (CF) from cradle to grave using life cycle assessment (LCA) method and to predict the future carbon emission of hazardous chemical packaging in the next five years (2016-2020), based on the export data of Tianjin Port in China. Grey model (GM) was adopted in the prediction. The results showed that majority of IBCs have lower carbon footprint than other types when the packaging contained same amount of same hazardous chemical. With the development of international trading, the demand of hazardous chemicals will increase as well. As the result, carbon emission generated by hazardous chemical packaging will increase accordingly. However, based on GM simulation result, increasing the amount of IBC use will effectively reduce the relative amount of carbon emission.

Sign in / Sign up

Export Citation Format

Share Document