2014 ◽  
Vol 1000 ◽  
pp. 118-121 ◽  
Author(s):  
Pavel Rovnaník ◽  
Patrik Bayer

Alkali-activated slag (AAS) is a material which has great potential for use in building industry. The aim of this work was to gain new superior properties by the addition of carbon nanotubes (CNTs). This material can act as a microreinforcement improving mechanical properties of cementitious materials. The effect of 0–1 wt.% addition of CNTs on the mechanical properties, hydration characteristics and microstructure of AAS binder was determined. The addition of CNTs delays the setting of the binder and a partial deterioration of strength parameters was observed.


2021 ◽  
Author(s):  
Thi Nhan Nguyen ◽  
Quoc Phung ◽  
Ziyou Yu ◽  
Lander Frederickx ◽  
Diederik Jacques ◽  
...  

Abstract Carbonation of alkali activated materials is one of the main deteriorations affecting their durability. However, current understanding in structural alteration of these materials exposed to an environment inducing carbonation at nano/micro scale remains limited. This study examined the evolution of phase assemblages of alkali activated slag mortars subjected to accelerated carbonation (1% CO2, 60% relative humidity, up to 28 day carbonation) using XRD, FTIR and 29Si, 27Al, 23Na MAS NMR. Samples with three water to binder (w/b) ratios (0.35, 0.45, and 0.55) were investigated. The results show that the phase assemblages mainly consisted of C-A-S-H, disordered remnant aluminosilicate binder, and a minor hydrotalcite as a secondary product. Upon carbonation, calcium carbonate is mainly formed as the vaterite polymorph, while no sodium carbonate is found after carbonation as commonly reported. The sodium acts primarily as a charge balancing ion without producing sodium carbonate as a final carbonation product in 28-day carbonated materials. The C-A-S-H structure becomes more cross-linked due to the decalcification of this phase evidenced by the appearance of Q4 groups, which replace the Q1 and Q2 ones as observed in the 29Si MAS NMR spectra, and the dominance of Al (IV) in 27Al MAS NMR. Especially, unlike cementitious materials, the influence of w/b ratio on the crystalline phase formation and structure of C-A-S-H in the alkali activated mortars before and after carbonation is limited.


2020 ◽  
Vol 2020 ◽  
pp. 1-7
Author(s):  
Fulin Wang ◽  
Guoliang Chen ◽  
Lu Ji ◽  
Zhengping Yuan

Backfilling disposal based on cement solidification is one of the ways to solve the environmental and safe problems of uranium tailing surface stacking. Alkali-activated slag, especially sodium silicate activated geopolymer, has become the preferred cementing material for the uranium tailing backfilling system because of its advantages of corrosion resistance and high strength. In this paper, uranium tailings and slag are taken as research objects, and the unconfined compressive strength (UCS) is taken as the main quality index. The preparation method of the cemented uranium tailing backfill based on alkali-activated slag was studied, hereinafter referred to as CUTB. The effects of additive amount, activator amount and activator modulus on the strength of CUTB were investigated. The results show that alkali-activated slag is an effective cementing material for the backfilling system of uranium tailing aggregate. The maximum UCS of 28 d age in the test groups is 16.45 MPa. Quicklime is an important additive for preparing CUTB. When the amount of quicklime is 0%, the early and late strengths of the filling body cannot be measured or at a very low level. At the age of 7 d, the order of each factor is additive amount > activator modulus > activator amount, but at the age of 28 d, the order of each factor is additive amount > activator amount > activator modulus. The test results can provide a basis for choosing cementitious materials for backfilling disposal of uranium tailings.


Sign in / Sign up

Export Citation Format

Share Document